D-Link DWR-980 Manuel utilisateur

Quick Installation Guide

DWR-980

Wireless AC1200 4G LTE Router with VDSL2 Support,

Gi abit Ethernet Ports, and 2 FXS Ports

DWR-980 Quick Installation Guide

BEFORE YOU BEGIN

Delivery Package

•Router DWR-980

•Power adapter DC 12V/2.5A

•Ethernet cab e

•Two detachab e LTE/3G antennas

•RJ-11 te ephone cab e

•“Quick Installation Guide” (brochure).

If any of the items are missing, p ease contact your rese er.

The “User Manual” and “Quick Installation Guide” documents are avai ab e

on D-Link website (see www.d ink.ru).

!Using a power supply with a different voltage rating than the one

included will cause damage and void the warranty for this product.

DWR-980 Quick Installation Guide

Default Settings

Do ain na e of device dlinkrouter.local.

IP address of device 192.168.0.1

Userna e (login) admin

Password admin

Na e of wireless

network (SSID)

2.4GHz DWR-980

5GHz DWR-980-5G

Network key (PSK password)

see WPS PIN on the barcode

abe on the back pane of

the device

Router DWR-980 with defau t settings cannot connect to the Internet.

To get started, p ease set your own password for access to the web-

based interface and change the WLAN name (SSID); then, if needed,

configure other settings recommended by your ISP.

DWR-980 Quick Installation Guide

System Requirements and Equipment

•A computer with any operating system that supports a web browser.

•A web browser to access the web-based interface of the router:

◦App e Safari 8 and ater

◦Goog e Chrome 48 and ater

◦Microsoft Internet Exp orer 10 and ater

◦Microsoft Edge 20.10240 and ater

◦Mozi a Firefox 44 and ater

◦Opera 35 and ater.

•A NIC (Ethernet or Wi-Fi adapter) to connect to the router.

•An 802.11a, b, g, n, or ac Wi-Fi adapter to create a wire ess network.

•Ana og phone.

•An active SIM card (when it is necessary to connect to the Internet via

mobi e operators' networks)1.

1 Contact your operator to get information on the service coverage and fees.

DWR-980 Quick Installation Guide

CONNECTING TO PC

PC with Ethernet Adapter

1. Connect an Ethernet cab e between any of LAN ports ocated on the back

pane of the router and the Ethernet port of your PC.

2. To connect via built-in modem: insert a SIM card into the s ot on the eft

side pane of the router with the go d contacts facing towards the front of

the device and gent y push unti it c icks.

!If you need to connect a SIM card or change it to another one when the

router is powered on, power off the router, insert or change the SIM

card, and power on the router.

3. To connect the router to a DSL line: connect a phone cab e between the

phone jack and the DSL port of the router.

4. To connect the router to an Ethernet line: connect an Ethernet cab e

between the WAN port of the router and the Ethernet ine.

5. Connect another phone cab e between an FXS port of the router and the

phone.

6. Connect the power cord to the power connector port on the back pane of

the router, then p ug the power adapter into an e ectrica out et or power

strip.

7. Turn on the router by moving the POW R switch on its back pane to the

ON (I) position.

Then make sure that your PC is configured to obtain an IP address

automatica y (as DHCP c ient).

DWR-980 Quick Installation Guide

Obtaining P Address Automatically

(OS Windows 7)

1. C ick the Start button and proceed to the Control Panel window.

2. Se ect the Network and Sharing Center section. (If the Contro Pane

has the category view (the Category va ue is se ected from the View by

drop-down ist in the top right corner of the window), choose the View

network status and tasks ine under the Network and Internet

section.)

3. In the menu ocated on the eft part of the window, se ect the Change

adapter settings ine.

4. In the opened window, right-c ick the re evant Local Area Connection

icon and se ect the Properties ine in the menu disp ayed.

5. In the Local Area Connection Properties window, on the

Networking tab, se ect the Internet Protocol Version 4 (TCP/IPv4)

ine. C ick the Properties button.

DWR-980 Quick Installation Guide

6. Make sure that the Obtain an IP address auto atically and Obtain

DNS server address auto atically choices of the radio buttons are

se ected. C ick the OK button.

7. C ick the OK button in the connection properties window.

DWR-980 Quick Installation Guide

PC with Wi-Fi Adapter

1. To connect via built-in modem: insert a SIM card into the s ot on the eft

side pane of the router with the go d contacts facing towards the front of

the device and gent y push unti it c icks.

!If you need to connect a SIM card or change it to another one when the

router is powered on, power off the router, insert or change the SIM

card, and power on the router.

2. To connect the router to a DSL line: connect a phone cab e between the

phone jack and the DSL port of the router.

3. To connect the router to an Ethernet line: connect an Ethernet cab e

between the WAN port of the router and the Ethernet ine.

4. Connect another phone cab e between an FXS port of the router and the

phone.

5. Connect the power cord to the power connector port on the back pane of

the router, then p ug the power adapter into an e ectrica out et or power

strip.

6. Turn on the router by moving the POW R switch on its back pane to the

ON (I) position.

7. Make sure that the Wi-Fi adapter of your PC is on. As a ru e, modern

notebooks with bui t-in wire ess NICs are equipped with a button or

switch that turns on/off the wire ess adapter (refer to your PC documents).

If your PC is equipped with a p uggab e wire ess NIC, insta the software

provided with your Wi-Fi adapter.

Then make sure that your Wi-Fi adapter is configured to obtain an IP address

automatica y (as DHCP c ient).

DWR-980 Quick Installation Guide

Obtaining P Address Automatically and

Connecting to Wireless Network (OS Windows 7)

1. C ick the Start button and proceed to the Control Panel window.

2. Se ect the Network and Sharing Center section. (If the Contro Pane

has the category view (the Category va ue is se ected from the View by

drop-down ist in the top right corner of the window), choose the View

network status and tasks ine under the Network and Internet

section.)

3. In the menu ocated on the eft part of the window, se ect the Change

adapter settings ine.

4. In the opened window, right-c ick the re evant Wireless Network

Connection icon. Make sure that your Wi-Fi adapter is on, then se ect

the Properties ine in the menu disp ayed.

5. In the Wireless Network Connection Properties window, on the

Networking tab, se ect the Internet Protocol Version 4 (TCP/IPv4)

ine. C ick the Properties button.

DWR-980 Quick Installation Guide

6. Make sure that the Obtain an IP address auto atically and Obtain

DNS server address auto atically choices of the radio buttons are

se ected. C ick the OK button.

7. C ick the OK button in the connection properties window.

8. To open the ist of avai ab e wire ess networks, se ect the icon of the

wire ess network connection and c ick the Connect To button or eft-

c ick the network icon in the notification area ocated on the right side of

the taskbar.

Autres manuels pour DWR-980

Table des matières

Autres manuels D-Link Routeur réseau

D-Link

D-Link DES-1048 Manuel utilisateur

D-Link

D-Link DSR-500 Manuel utilisateur

D-Link

D-Link DIR-610N Manuel utilisateur

D-Link

D-Link AirPlus XtremeG Ethernet-to-Wireless Bridge... Manuel utilisateur

D-Link

D-Link Express Ethernetwork DI-707P Manuel utilisateur

D-Link

D-Link DSL-2878 Manuel utilisateur

D-Link

D-Link DES-1005D Manuel utilisateur

D-Link

D-Link DIR-822-US Manuel utilisateur

D-Link

D-Link Broadband DSL-254B Manuel utilisateur

D-Link

D-Link DES-1016E Manuel utilisateur

D-Link

D-Link DVG-N5402SP Manuel utilisateur

D-Link

D-Link DI-2621 Manuel utilisateur

D-Link

D-Link DSR-150 Manuel utilisateur

D-Link

D-Link DSL-560I Manuel utilisateur

D-Link

D-Link SharePort DIR-825 Manuel utilisateur

D-Link

D-Link DMC-300SC - Media Converter - External Manuel utilisateur

D-Link

D-Link DI-804V Manuel utilisateur

D-Link

D-Link EBR-2310 - EN Broadband Router Manuel utilisateur

D-Link

D-Link DSL-G256DG Manuel utilisateur

D-Link

D-Link DI-304 Manuel utilisateur

D-Link

D-Link DSL-1500G v.A1 Manuel utilisateur

D-Link

D-Link DSL-2750E Manuel utilisateur

D-Link

D-Link DIR-853 Manuel utilisateur

D-Link

D-Link DIR-X5460 Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité