D-Link DRO-250i Manuel utilisateur

DRO-250i ROUTER

Review Package Contents

Make sure that the package contains the following items.

•DRO-250i Router

•3 Straight

Ethernet cables

•1 Cross-over

Ethernet Cable

•1Power cord

•1 V.35 Cable

•1 User Manual CD

Before You Begin

The default IP address for the DRO-250i is 192.168.100.254

with a Subnet Mask of 255.255.255.0.

Connecting the DRO-250i

A.Make the necessary power connections. The power LED

will turn ON to indicate proper operation.

B. Connect the LAN interface to the hub or switch connected

to your internal network using cross cable.

C. Connect the V.35 DTE WAN Port to a 2 Mbps Leased-

Line modem.

D. Computers that act as servers (Mail Server, FTP Servers etc)

to provide Internet services can be connected to the

DMZ Port using an Ethernet Cable.

E. Connect the WAN2 interface to the ISDN NT1.

F. Connect an analog modem to the Aux Port.

Front View

Rear View

LAN P

ISDN Port

WAN3/DMZ Port V.35

AUX Port

Power Socket

DRO-250i Router Connection Diagram

Internet

Internal Network

Hub or switch

DRO-250i

DNT-NT1

DLM-G2100V

WAN 3

ISDN WAN 2

V.35

GLB-502T

LAN

Configuring DRO-250i

A computer on your LAN must have its NIC card set, to obtain

its IP address automatically (refer appendix). The Router by

default is assigned an IP address of 192.168.100.254 with a

subnet mask of 255.255.255.0.

1. Connect to https://192.168.100.254 using Internet Explorer.

Check whether the PC is in the same IP range and the Proxy

is disabled

The Security Alert

window will appear.

Click on ‘yes’

2. Login page will appear

3. D-Link welcome page will appear and you can browse

through it.

User Name: admin

Password: admin

4. For LAN settings go to Interface >LAN

5. For WAN 1 settings go to Interface > WAN1

You will need to enter the IP address, subnet mask, gateway

address provided to you by your ISP.

IP address :192.168.100.254

Subnet Mask :255.255.255.0

e.g

WAN 1 Protocol :CiscoHDLC

IP address : 192.168.0.1

Subnet mask :255.255.255.0

Default Gateway :192.168.0.2

6. For ISDN settings go to

a) Interface>WAN2>Mode Settings

b) Interface> WAN2> Dial-Up>Connection Settings

Select the type of connection available at your end.

Configure the ISDN Port for

‘Dial up’.

Enable ‘Dial up’

Click ‘Apply’

e.g.

My phone number: 2783393

Layer 2 Protocol: HDLC

Layer 3 Protocol: Trans

Packet Encapsulation: SynPPP

ConnectionType:128kbps

dialout/dialin

Dial on Demand : Disable

High Water Mark: N.A.

High Water Time: N.A.

C) Interface>WAN2>Dial-Up>Dial Out

d) Interface> WAN2>Dial

This page displays the status of the ISDN line.

e.g.

Channel Type: B1

Dynamic IP Address : Enable

Area Code : 0

Dial Prefix: 0

Phone No.: 172225

User Name: test

Password: test

Click on ‘DIAL’

to connect to the

ISP.

7. To add routes go to Routing

This page allows the user to add and delete static route

8. To make DHCP settings go to Advanced >DHCP Server

The Router can be configured to act as a DHCP server assigning

IP’s to computers on the LAN network.

Autres manuels pour DRO-250i

Table des matières

Autres manuels D-Link Routeur réseau

D-Link

D-Link Cobra DSL-5300 Manuel utilisateur

D-Link

D-Link DSL-6740U Manuel utilisateur

D-Link

D-Link DSR-150 Manuel utilisateur

D-Link

D-Link DSL-3580L Series Manuel utilisateur

D-Link

D-Link SharePort DIR-825 Manuel utilisateur

D-Link

D-Link DIR-1260 Manuel utilisateur

D-Link

D-Link Amplifi DIR-657 Manuel utilisateur

D-Link

D-Link GO-DSL-N151 Manuel utilisateur

D-Link

D-Link DSR-500 Manuel utilisateur

D-Link

D-Link COVR DKT-883 Manuel utilisateur

D-Link

D-Link DWR-953 Manuel utilisateur

D-Link

D-Link SharePort DIR-825 Manuel utilisateur

D-Link

D-Link DGS-3024 Manuel utilisateur

D-Link

D-Link DIR-300 - Wireless G Router Manuel utilisateur

D-Link

D-Link DIR-822-US Manuel utilisateur

D-Link

D-Link DI-300 series Manuel utilisateur

D-Link

D-Link Router Manuel utilisateur

D-Link

D-Link DES-1008PA Manuel utilisateur

D-Link

D-Link DIR-868L Manuel utilisateur

D-Link

D-Link DSL-G256DG Manuel utilisateur

D-Link

D-Link DIR-652 Manuel utilisateur

D-Link

D-Link DIR-841 Manuel utilisateur

D-Link

D-Link DES-1016D - Switch Manuel utilisateur

D-Link

D-Link GO-SW-5E Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité