D-Link DIR-300 - Wireless G Router Manuel utilisateur

Autres manuels pour DIR-300 - Wireless G Router

16

Table des matières

Autres manuels D-Link Routeur réseau

D-Link

D-Link DES-1210-28/ME Manuel utilisateur

D-Link

D-Link COVR-X1862 Instructions d'installation

D-Link

D-Link DSL-2730B Guide de configuration

D-Link

D-Link DI-704GU Manuel utilisateur

D-Link

D-Link DIR-868L Manuel utilisateur

D-Link

D-Link DSL-500 Manuel utilisateur

D-Link

D-Link DSL-2640BT Manuel utilisateur

D-Link

D-Link DWR-921 Guide de configuration

D-Link

D-Link DSL-504 Manuel utilisateur

D-Link

D-Link N300 Manuel utilisateur

D-Link

D-Link DSL-3890 Manuel utilisateur

D-Link

D-Link DSL-2642B Manuel utilisateur

D-Link

D-Link DSL-526E Manuel utilisateur

D-Link

D-Link DIR-120 Manuel utilisateur

D-Link

D-Link GO-DSL-N151 Manuel utilisateur

D-Link

D-Link GO-SW-5E Manuel utilisateur

D-Link

D-Link DGL-4100 - GamerLounge Broadband Gigabit Gaming... Manuel utilisateur

D-Link

D-Link Express EtherNetwork DI-604 Manuel utilisateur

D-Link

D-Link DIR-601 Manuel utilisateur

D-Link

D-Link DIR-808L Manuel utilisateur

D-Link

D-Link EAGLE PRO AI M15 Manuel utilisateur

D-Link

D-Link DIS-2650AP Manuel utilisateur

D-Link

D-Link DSL-2750U Manuel utilisateur

D-Link

D-Link DES-6300 Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité

D-Link Technical Support – Applying WPA-PSK Encryption on the DIR-300. Page 1of 3

Applying WPA-PSK Encryption

This document will detail how to setup WPA-PSK Encryption on the DIR-300.

WPA-PSK is now considered to be the standard with encrypting a wireless network, it is far

more secure then WEP and is therefore recommended.

D-Link Technical Support – Applying WPA-PSK Encryption on the DIR-300. Page 2of 3

1. First you will need a computer/laptop to be connected to one of the LAN Ethernet ports.

NOTE: If you are going to change your Wireless Encryption, DO NOT perform this over a

Wireless connection, connect your computer/laptop to a LAN Port.

2. Proceed to open an Internet Browser and login to the DIR-300 Web Configuration.

NOTE: Instructions are on the Technical Support Knowledge Base if you are unsure on

how to login to the Web Configuration.

3. Click on SETUP > Wireless Setup > Manual Wireless Connection Setup button.

4. Once you have access to the Wireless Setup page, there are only a couple of

adjustments needed to be made, please see below:

D-Link Technical Support – Applying WPA-PSK Encryption on the DIR-300. Page 3of 3

It is recommended to change the Wireless Network Name (SSID) to a name of your liking,

in this example it is called "home_network". Enable Auto Channel Selection can be

enabled however it is not mandatory. The Wireless Channel can be changed, Channel's 1,

6 and 11 are non overlapping and are recommended.

Under the WIRELESS SECURITY MODE heading select from the dropdown "Enable

WPA Only Wireless Security (enhanced)".

Under the WPA ONLY heading the Cipher Type and PSK/EAP settings are recommended

on their default setting. The Network Key is where you type in a password for your

Wireless, it can be alphanumeric and a minimum of 8 characters. The Network Key is

considered to be your Wireless Password. REMEMBER IT!

5. Now proceed to click on the Save Settings button.

6. WPA-PSK Encryption is now configured.

IMPORTANT:

If you decide to change your Wireless Encryption password, you will need to remove

your existing Wireless Profile or edit it to reflect the new changes.

Please remember to ensure your DIR-300 has the most current firmware version

applied. To apply this firmware please refer to the Technical Support Knowledge

Base.