D-Link DES-3204 Manuel utilisateur
DES-3204
4-Port Gigabit Ethernet Switch
D-View Management Module
User’s Guide
Copyright Statement
Copyright ©1999 D-Link Corporation
No part of this publication may be reproduced in any form or by any means or
used to make any derivative such as translation, transformation, or adaptation
without permission from D-Link Corporation/D-Link Systems Inc., as stipulated
by the United States Copyright Act of 1976.
Trademarks
D-Link is a registered trademark of D-Link Corporation/D-Link Systems, Inc.
All other trademarks belong to their respective owners.
Limited Warranty
The software and reference material are provided “as are,” without warranty as
to their performance, merchantability or fitness for any particular purpose. D-
Link Corporation/D-Link Systems, Inc. reserve the right to revise this
publication and to make changes to its contents at any time, without obligation to
notify any person or entity of such revisions or changes.
Table of Contents
ABOUT THIS GUIDE.......................................................................................2
INTRODUCTION..............................................................................................3
DGS-3204 INTELLIGENT ETHERNET SWITCH.....................................................3
NETWORK MANAGEMENT..................................................................................3
INSTALLING THE MANAGEMENT MODULE..........................................5
REQUIREMENTS .................................................................................................5
INSTALLING THE MODULE SOFTWARE ...............................................................6
PREPARING THE SWITCH FOR MANAGEMENT.....................................................7
DGS-3204 MANAGEMENT.............................................................................8
ADDING YOUR DGS-3204 SWITCH TO THE MAP................................................8
THE MODULE DISPLAY....................................................................................10
Selecting Ports.............................................................................................11
MENU BUTTONS ..............................................................................................11
Configuration Menu Button.........................................................................12
Monitor Menu Button...................................................................................31
Reset Menu Button.......................................................................................41
INDEX...............................................................................................................44
DGS-3204 Ethernet Switch Management User’s Guide
2 About this Guide
DGS-3204 Management
User’sGuide
About this Guide
This User’s Guide tells you how to use the D-View network management system
(version 4.1 or later) to manage your DGS-3204 intelligent Gigabit Ethernet
switch, including how to install the D-View management module for the switch,
and how to use the module to control and monitor the switch. Additional
information on installing your switch and configuring it for management can be
found in the DGS-3204 User’s Guide.
DGS-3204 Ethernet Switch Management User’s Guide
Introduction 3
Introduction
DGS-3204 Intelligent Ethernet Switch
This guide discusses how to manage the DGS-3204 switch using the D-View
network management system. The DGS-3204 combines conventional Ethernet,
Gigabit Ethernet and switching technologies into one package. This device
features four ultra high-speed 1000BASE-SX Gigabit Ethernet switching ports
supporting.
Additional information about configuring the DGS-3204 Ethernet switch may be
found in the Ethernet switch’s hardware User’s Guide.
Network Management
As networks grow larger, network management becomes more and more of a
necessity. A large network requires a considerable amount of work to keep it
running smoothly, including time and effort spent on user support,
troubleshooting, network planning, and performance monitoring. The intent of a
network management system (NMS) is to make it possible to monitor a widely
spread-out network (possibly spanning many different sites) from a centralized
location.
Network management works by placing a small degree of “intelligence” in the
network elements (routers, switches, hubs, hosts, etc.) to be managed. This
intelligence takes the form of an agent that is capable of collecting statistics and
status information, as well as performing control operations that affect the
operation of the network. The agent responds to commands and requests for
information from the centralized network management system, allowing the
health and performance of the network to be monitored and adjusted.
DGS-3204 Ethernet Switch Management User’s Guide
4Introduction
A network protocol known as the Simple Network Management Protocol
(SNMP) is generally used to communicate between network management
stations and the devices they manage. SNMP was originally developed for
controlling the devices that made up the infrastructure of the Internet, and has
become the primary standard for network management. SNMP commonly runs
“on top of” the TCP/IP Internet Protocol, though other transmission methods are
possible.
Because a network management station can be used to manage a wide range of
devices, network management software is generally divided into two different
parts: a base platform consisting of software common to the management of all
devices; and a set of modules, each of which can communicate with a narrow
range of devices by way of their SNMP-based agents. If a new device type is
added to the network, then a new module (compatible with the particular
platform being used) needs to be added to facilitate its management.
This manual describes the module used on the D-View platform for controlling
DGS-3204 intelligent Gigabit Ethernet switches.
DGS-3204 Ethernet Switch Management User’s Guide
Installing the Management Module 5
Installing the Management Module
This section describes the requirements and procedures for installing the DGS-
3204 management module on your network management system.
Requirements
We recommend that your system meet the following requirements to be able to
use the DGS-3204 switch management module:
♦A PC-compatible computer with a 486DX2-66 or faster processor
♦Microsoft Windows version 3.1xor Microsoft Windows 95 or later
operating system.
♦D-View SNMP Network Management Program, version 4.1 or later.
♦8 megabytes (16M preferred) of main memory (RAM)
♦At least 10 megabytes of free hard disk space
♦A Windows-compatible mouse or other pointing device
♦An Ethernet network card with appropriate drivers
♦CD-ROM drive
DGS-3204 Ethernet Switch Management User’s Guide
6 Installing the Management Module
Installing the Module Software
Note: Please ensure that the D-View platform program has been installed
on the computer you are using for network management before proceeding.
Take the following steps to install the module on your network management
system:
1. Exit D-View if you are running it.
2. Insert the Setup/Application CD-ROM containing the module into your
CD-ROM drive (E: will be used in this manual although your CD-ROM
drive letter may be different).
3. If you are using Windows 3.1, choose Run… from the Program
Manager’s File menu. Under Windows 95, choose Run… from the
Start menu on the taskbar. When the dialog box appears, type the
pathname of the Install program on the CD-ROM drive
(E:\INSTALL)
4. Click OK. The installation program will start.
5. When the program prompts for your D-View Directory, enter the
pathname of the directory where you installed D-View, and click
Continue.
DGS-3204 Ethernet Switch Management User’s Guide
Installing the Management Module 7
6. The installation program will install all of the necessary files onto your
system. When it is finished, it will display the following dialog:
Click on the Exit button. The D-View network management system is now ready
to manage DGS-3204 Ethernet switches.
Preparing the Switch for Management
You will need to make sure that your switch is properly set up before you can
use the management module:
♦Ensure that the switch is connected to the same network as the network
management station.
♦Ensure that the switch’s TCP/IP settings are set properly. If the switch is
on the same local network, the network portion of the switch’s IP address
needs to be the same as that of the network management station. If they
are on separate LANs, the TCP/IP gateway (router) field of both the
switch and the router need to be set properly so that information can be
routed properly between the switch and the management station.
For more information about these and other items, consult the DGS-3204
hardware User’s Guide.
DGS-3204 Ethernet Switch Management User’s Guide
8 DGS-3204 Management
DGS-3204 Management
Adding your DGS-3204 Switch to the Map
Before you can manage individual DGS-3204 Ethernet switches, you need to
add them to your D-View network map. You can do this either by:
♦Using D-View’s Auto Discover capability to add all new SNMP-
manageable devices to the map.
♦Using the Add-Modify Map Device command to place each switch on the
map.
To use the second method:
1. Press the Add/Modify a device on the map button shown below.
2. Select the DGS-3204 from the icon list at the right of the Add-Modify
Map Device dialog.
Table des matières
Autres manuels D-Link Routeur réseau
D-Link
D-Link DES-1026G Manuel utilisateur
D-Link
D-Link DIR-X5460 Manuel utilisateur
D-Link
D-Link DWR-921 Manuel utilisateur
D-Link
D-Link 24-Port 10/100/1000Mbps Ethernet Switch... Manuel utilisateur
D-Link
D-Link WBR-1310 - Wireless G Router Manuel utilisateur
D-Link
D-Link DWR-161 Manuel utilisateur
D-Link
D-Link DSL-2640BT Manuel utilisateur
D-Link
D-Link DSL-500 Manuel utilisateur
D-Link
D-Link DWR-980 Manuel utilisateur
D-Link
D-Link xStack DES-3200 Series Manuel utilisateur
D-Link
D-Link DSR-500 Manuel utilisateur
D-Link
D-Link DES-810 Manuel utilisateur
D-Link
D-Link WRM921 Manuel utilisateur
D-Link
D-Link DIR-853 Manuel utilisateur
D-Link
D-Link DIR-813 Manuel utilisateur
D-Link
D-Link DSL-526B Manuel utilisateur
D-Link
D-Link COVR-2203 Manuel utilisateur
D-Link
D-Link DIR-514 Manuel utilisateur
D-Link
D-Link DIR-816 Manuel utilisateur
D-Link
D-Link DSL-2680 Manuel utilisateur
Manuels Routeur réseau populaires d'autres marques
NETGEAR
NETGEAR FS526T - Switch Manuel utilisateur
Korenix
Korenix JetNet 5710G Series Manuel utilisateur
Automated Logic
Automated Logic ZN551 Manuel du propriétaire
Cisco
Cisco ASR 1000 Series Manuel de l'opérateur
EnGenius
EnGenius ESR-9710 Manuel utilisateur
Cisco
Cisco 805 Series Instructions d'utilisation et de sécurité