D-Link DWA-142 Manuel utilisateur
2D-Link DWA-142 Quick Install Guide
• A computer or laptop with an available USB 2.0 port
• Windows®2000 (SP4) or XP (SP2)
• 300MHz processor and at least 32MB of RAM
• Properly installed and working USB Controller
• A draft 802.11n or 802.11b/g access point (for Infrastructure mode),
or another draft 802.11n wireless adapter (for Ad-Hoc networking
mode).
Package Contents
D-Link DWA-142
Wireless USB Adapter
System Requirements
If any of the above items are missing, please contact your reseller.
Manual, Software, and
Warranty on CD
NOTE: This product is based on IEEE draft 802.11n specifications and is not
guaranteed to be forward compatible with future versions of IEEE 802.11n
specifications. Compatibility with draft 802.11n devices from other manufacturers is
not guaranteed.
3 D-Link DWA-142 Quick Install Guide
Adapter Installation
Warning: Do NOT install the DWA-142 USB Adapter into your
computer before installing the driver software from the D-Link CD.
Turn on the computer and Insert the D-Link DWA-142 Driver CD in the
CD-ROM drive. The step-by-step instructions that follow are shown in
Windows XP.The steps and screens are similar for the other Windows
operating systems.
If the CD Autorun function does not automatically start on your
computer, go to Start > Run. In the run box type “D:\DWA142.exe”
(where D: represents the drive letter of your CD-ROM drive).
When the autorun screen appears, click Install Drivers.
4D-Link DWA-142 Quick Install Guide
The InstallShield Wizard window
will appear.
By default setup will install to
the default location: C:\Program
Files\D-Link\DWA-142, where C:
represents the drive letter of your
hard drive. To install to a different
location click Browse and specify
the location.
Select the Program Files folder
location.
Click Next
Click Next
Click Next
5 D-Link DWA-142 Quick Install Guide
The D-Link Configuration Wizard
will now appear.
If you are using Windows®XP
(SP2), you will have the option to
use either the D-Link utility or the
built-in Windows®Wireless utility.
Insert the adapter into an available
USB port on your computer.
If the Found New Hardware Wizard
appears, click Cancel.
Enter the network name (SSID)
manually. If you enter the SSID
incorrectly, you will automatically
be brought to the site survey page.
Click Scan to display the site
survey page.
Click Next
Click Next
Click Next
6D-Link DWA-142 Quick Install Guide
Click on the network name (SSID)
and click Next.
Click Finish to continue. If you are
prompted to reboot your computer,
select Yes, I want to restart my
computer now.
Click Next
Click Finish
7 D-Link DWA-142 Quick Install Guide
Windows®XP users may use the built-in wireless utility.The following
instructions are for Service Pack 2 users.
If you are using Windows®2000, you must use the D-Link utility.
(Please refer to page 9).
If you receive the Wireless Networks Detected bubble, click on the
center of the bubble to access the utility.
Connect to a Wireless Network
You may also right-click on the wireless computer icon in your system
tray (lower-right corner next to the time). Select View Available
Wireless Networks.
Windows®XP Configuration Utility
8D-Link DWA-142 Quick Install Guide
The Wireless Connection Manager will display any available wireless
networks in your area. Click on a network and click the Connect
button.
Refer to the Wireless Security section in the manual for information
on connecting to a secure network.
9 D-Link DWA-142 Quick Install Guide
The DWA-142 uses the D-Link Wireless Connection Manager
as the management software. The manager provides the user
an easy interface to change any settings related to the wireless
adapter. Clicking on the D-Link icon on your desktop will start the
Configuration.
To disable the Windows®XP wireless utility, and use the D-Link
Wireless Connection Manager, follow the steps below:
Right-click on the wireless computer icon in your system tray (lower-right
corner next to the time). Select View Available Wireless Networks.
In the Choose aWireless Network window click Change Advanced
Settings on the left side below Related Tasks.
Connect to a Wireless Network
Wireless Connection Manager
10D-Link DWA-142 Quick Install Guide
In the Wireless Network Connection Properties window, uncheck
Use Windows®to configure my wireless network settings and
then click OK.
Double-click the Wlreless Connection Manager icon on your desktop
to start the Configuration.
This window will allow you to see available wireless networks in your
area. Simply click the network (SSID) you want to connect to and
click the Connect button.
Autres manuels pour DWA-142
3
Table des matières
Autres manuels D-Link Adaptateur
D-Link
D-Link DHP-308AV Manuel utilisateur
D-Link
D-Link VTA-VR Manuel utilisateur
D-Link
D-Link DVG-2101sp Manuel utilisateur
D-Link
D-Link DHP-P700AV Manuel utilisateur
D-Link
D-Link DXE-810S Manuel utilisateur
D-Link
D-Link DVG-2102S Manuel utilisateur
D-Link
D-Link DHP-P500AV Manuel utilisateur
D-Link
D-Link DWA-111 Manuel utilisateur
D-Link
D-Link DVG-2001S Manuel utilisateur
D-Link
D-Link DU-CV Manuel utilisateur
D-Link
D-Link AX1800 Manuel utilisateur
D-Link
D-Link DWA-162 Manuel utilisateur
D-Link
D-Link AirPlus G DWL-G510 Manuel de l'opérateur
D-Link
D-Link DHP-306AV Manuel utilisateur
D-Link
D-Link DFE-528TX Instructions d'utilisation
D-Link
D-Link DVG-7111S Manuel utilisateur
D-Link
D-Link DWA-542 Manuel utilisateur
D-Link
D-Link DHP-303 - PowerLine HD EN Starter Manuel utilisateur
D-Link
D-Link AirPlus DWL-G120 Manuel utilisateur
D-Link
D-Link DGE-550SX Manuel utilisateur
