D-Link DUB-E100 Manuel utilisateur
Version 4.1 | 04/05/2012
iD-Link DUB-E100 User Manual
Table of Contents
D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any
person or organization of such revisions or changes. Information in this document may become obsolete as our services and
websites develop and change. Please refer to the www.mydlink.com website for the most current information.
Trademarks
D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United
States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of
their respective companies.
Copyright © 2012 by D-Link Corporation.
All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission
from D-Link Corporation.
Manual Overview
iiD-Link DUB-E100 User Manual
Table of Contents
Package Contents ..........................................................................................................................................................................................................1
System Requirements ..................................................................................................................................................................................................1
Introduction ....................................................................................................................................................................................................................2
Features .............................................................................................................................................................................................................................2
Hardware Overview ......................................................................................................................................................................................................3
Software Installation ....................................................................................................................................................................................................4
Windows 7 ................................................................................................................................................................................................................4
Windows Vista .........................................................................................................................................................................................................6
Windows XP .............................................................................................................................................................................................................7
Mac OS X ................................................................................................................................................................................................................10
Linux 2.6.14 ...........................................................................................................................................................................................................13
Connecting the Adapter to a Network ...............................................................................................................................................................14
Completing the Installation ....................................................................................................................................................................................15
Troubleshooting ......................................................................................................................................................................................16
Technical Specications .........................................................................................................................................................................18
Table of Contents
1D-Link DUB-E100 User Manual
Section 1 - Product Overview
• DUB-E100 USB 2.0 10/100 Fast Ethernet Adapter
• DUB-E100 Drivers and Manual on CD-ROM
• Quick Installation Guide
If any of the above items are missing or damaged, please contact your reseller.
Package Contents
System Requirements
System Requirements
Computer with the following:
• Microsoft Windows® 7/Vista®/XP/2000, Linux, or Mac OS X 10.4/10.5
• Pentium 2.0 GHz or higher with a minimum of 32 MB RAM
• Available USB port
• CD-ROM drive
2D-Link DUB-E100 User Manual
Section 1 - Product Overview
Introduction
Thank you for choosing the D-Link DUB-E100 USB 2.0 10/100 Fast Ethernet Adapter. The DUB-E100 USB 2.0 10/100 Mbps Fast
Ethernet Adapter is specically designed to plug into an available Universal Serial Bus (USB) port on a desktop or laptop PC
running Microsoft Windows 7/Vista/XP/2000, Mac OS X, or Linux. Based on USB 2.0, the DUB-E100 extends the transfer speed
of earlier USB Fast Ethernet adapters to true 10/100 Mbps connectivity. Power for the DUB-E100 is provided directly by the USB
bus, eliminating the need for an external power adapter. It also supports USB energy-saving suspend and resume functions
to minimize power consumption, which is especially useful for laptop/notebook users.
Features
Designed for versatility and performance, the DUB-E100 USB 2.0 10/100 Fast Ethernet Adapter provides the following:
• Compliant with USB 2.0 and USB 1.1 specications
• True 10/100 Mbps network connectivity
• Compliance with IEEE 802.3u Fast Ethernet standards and IEEE 802.3 Ethernet standards
• Plug-and-Play installation
• Auto 10/100 Mbps speed detection
• Supports half and full-duplex at 10 Mbps, half and full-duplex at 100 Mbps
• One built-in RJ-45 connector
• Auto-negotiation to the highest available speed
• Two LED indicators: Link, TX/RX
• Driver support:
• Microsoft Windows 7 (x86, x64)
• Microsoft Windows Vista (x86, x64)
• Microsoft Windows XP (x86/x64 Edition)
• Linux (kernel 2.6.14 & above)
• Macintosh OS X (10.4, 10.5)
• Microsoft Windows 2000
3D-Link DUB-E100 User Manual
Section 1 - Product Overview
Hardware Overview
COMPONENT DESCRIPTION
Ethernet Port Plug an Ethernet cable from a switch, hub, or router into this port.
USB Connector Plug this connector into a USB port on your PC.
Ethernet Port
USB Connector
4D-Link DUB-E100 User Manual
Section 2 - Installation
Software Installation
Insert the DUB-E100 CD into your computer’s DVD or CD drive, then proceed to the appropriate installation section on the
following pages for your operating system.
Note: If the user interface does not start up, please go to the Autorun folder in your PC’s CD drive and open Autorun manually.
After you put the CD into the CD drive, the DUB-E100 user interface menu
screen will appear. Click on Install to begin the DUB-E100 driver installation.
The InstallShield Wizard will then pop up and run automatically.
Note: The DUB-E100 user interface may dier in appearance for dierent
regions.
Windows 7
5D-Link DUB-E100 User Manual
Section 2 - Installation
When the InstallShield Wizard is completed, plug the DUB-E100 into your PC
and the driver software installation will be completed automatically.
When the Windows 7 driver installation is complete, please then proceed to
Connecting the Adapter to a Network on page 14.
6D-Link DUB-E100 User Manual
Section 2 - Installation
Windows Vista
After you put the CD into the CD drive, the DUB-E100 user interface menu
screen will appear. Click on Install to begin the DUB-E100 driver installation.
The InstallShield Wizard will then pop up.
Note: The DUB-E100 user interface may dier in appearance for dierent
regions.
Plug the DUB-E100 into your PC and the driver software installation will be
completed automatically.
When the Windows Vista driver installation is complete, you can connect
the DUB-E100 to a USB port on your computer. Please then proceed to
Connecting the Adapter to a Network on page 14.
7D-Link DUB-E100 User Manual
Section 2 - Installation
After you put the CD into the CD drive, the DUB-E100 user interface menu
screen will appear. Click on Install to begin the DUB-E100 driver installation.
The InstallShield Wizard will then pop up.
Note: The DUB-E100 user interface may dier in appearance for dierent
regions.
Windows XP
Plug the DUB-E100 into your PC.
Autres manuels pour DUB-E100
13
Table des matières
Autres manuels D-Link Adaptateur
D-Link
D-Link WDA-2320 RangeBooster G Manuel utilisateur
D-Link
D-Link VTA-VR Manuel utilisateur
D-Link
D-Link DWL-G650M - Super G With MIMO Manuel utilisateur
D-Link
D-Link PersonalAir DBT-120 Manuel utilisateur
D-Link
D-Link AirPlus G DWL-120 Manuel utilisateur
D-Link
D-Link DHP-306AV Manuel utilisateur
D-Link
D-Link DWA-171 Manuel utilisateur
D-Link
D-Link DWA-171 Manuel utilisateur
D-Link
D-Link DFE-550TX Instructions de montage
D-Link
D-Link DGE-500SX Manuel utilisateur
D-Link
D-Link PersonalAir DBT-120 Manuel utilisateur
D-Link
D-Link DHP-P600AV Manuel utilisateur
D-Link
D-Link DWL-122 Manuel utilisateur
D-Link
D-Link AirPlus DWL-120+ Manuel utilisateur
D-Link
D-Link DHP-328AV Manuel utilisateur
D-Link
D-Link DGE-660TD Manuel utilisateur
D-Link
D-Link DWM-221 Manuel utilisateur
D-Link
D-Link DXE-810T Manuel utilisateur
D-Link
D-Link Vectra VL420 Manuel utilisateur
D-Link
D-Link DWA-548 Manuel utilisateur
