D-Link DVG-5102S Manuel utilisateur
Quick Installation Guide
DVG-5102S
VoIP Telephone Adapter
Check Your Package Contents
DVG-5102S
VoIP TA
Ether CAT5 UTP)
Cable
12VDC, 1A Power
Adapter
Using a power
adapter with a different
voltage rating will
damage this product
and void the warranty.
2
Front Panel
1. Power Indicator: Solid green light indicates a normal power supply.
2. Alarm Indicator: Red light indicates abnormal status, such as
failed to register or provision or not obtained IP address.
3. Register Indicator: The Register LED will turn on when the VoIP
Router is connected to a VoIP service provider. The LED will blink if
not connected to a service provider.
4. LAN indicator: When a connection is established the LED will light
up solid. The LEDs will blink to indicate activity. If the LED does not
light up when a cable is connected, verify the cable connections and
make sure your devices are powered on.
5. WAN indicator: When a connection is established the LED will light
up solid. The LED will blink to indicate activity. If the LED does not
light up when a cable is connected, verify the cable connections and
make sure your devices are powered on.
6. Phone Indicator: Phone LED will light up solid if a phone
connected to a phone port is off the hook or in use. When a phone
is ringing, the indicator will blink.
Hardware Overview
3
Rear Panel
1. Phone : Connect to your phones using standard phone cabling (RJ-
11).
2. WAN: Connect to your broadband modem or router using an
Ethernet cable.
3. LAN: Connect to your Ethernet enabled computers using Ethernet
cabling.
4. Power receptor: Receptor for the provided power adapter.
5. Reset Button: Press this button to restore factory default settings.
Hardware Overview (continued)
4
A. Insert one end of the Ethernet cable into the Ethernet (LAN) port on
the back panel of the DVG-5102S and the other end of the cable to
an Ethernet Adapter or available Ethernet port on your computer.
B. Insert one end of the Ethernet cable into the WAN port on the back of
the DVG-5102S and the LAN port of your router.
C. Insert a telephone cable into the Phone port, and then connect the
cable to your telephone.
Installing the Hardware
5
D. Connect the power adapter to the power input at the back panel of
the DVG-5102S and then plug the other end of the power adapter to
a wall outlet or power strip. On the front of the device, the Power LED
will turn on to indicate proper operation.
E. Check the LED display on the front of the VoIP TA to confirm that the
connections have been made.
Installing the Hardware (continued)
6
After the installations are completed, your network should look similar to
the diagram below.
Hardware configuration is complete! If your VoIP service is already activated, you
can make phone calls now.
Installing the Hardware (continued)
7
Configuration
To access the web-based configuration utility, set a statics IP on the LAN
adapter, open a web browser such as Internet Explorer and enter the IP
address of the DVG-5102S.
*Statics IP: 192.168.8.XXX, the “XXX” can be any number from 1~253 except 254 cannot
be used*
If the DVG-5102S is connected behind a router, the IP address of the
router is determine by the router’s DHCP Server.
Open your Web browser and
type http://192.168.8.254 into
the URL address box. Press
the Enter or Return Key.
User name: User
Password: [leave this blank]
Click Login to enter Web Site.
8
Configuration (continued)
The username of USER have been
defined and locked by default. It is
highly recommended to create a
login password to keep your router
secure at “Maintenance Device
Management User”.
Click “Apply” “Save and Reboot”
Select your Internet connection type:
DHCP –Connecting the DVG-
5102S behind a router.
Static IP –Select if your ISP
supplied you with your IP settings.
PPPoE –Most DSL ISPs.
Select Manual to manually enter IP
address of DNS or select Auto if
DNS is assigned by ISP.
9
Technical Support
You can find software updates and user documentation on the D-Link
website.
Tech Support for customers within Singapore:
D-Link Technical Support over the Telephone:
Service Centre Hotline: (65) 6774 6233 [Press 1]
24x7 Technical Support Hotline: (65) 6501 4200
D-Link Technical Support over the Internet:
www.dlink.com.sg/support/
email:[email protected]
Autres manuels pour DVG-5102S
1
Table des matières
Autres manuels D-Link Adaptateur
D-Link
D-Link DHP-311AV Manuel utilisateur
D-Link
D-Link DWA140 - RANGE BOOSTER N USB ADAPTOR Manuel utilisateur
D-Link
D-Link DUB-A2 Manuel utilisateur
D-Link
D-Link DWL-122 Manuel de l'opérateur
D-Link
D-Link DHP-209AV Manuel utilisateur
D-Link
D-Link Rangebooster G WNA-2330 Manuel utilisateur
D-Link
D-Link DWA-610 Manuel utilisateur
D-Link
D-Link DWA-643 Manuel utilisateur
D-Link
D-Link DWA-542 Manuel utilisateur
D-Link
D-Link AirPlus DWL-G120 Manuel utilisateur
D-Link
D-Link DWA-556 Manuel utilisateur
D-Link
D-Link DPE-101GI Manuel utilisateur
D-Link
D-Link DWA-110 Manuel utilisateur
D-Link
D-Link DWA-120 Manuel utilisateur
D-Link
D-Link Air DWL-120 Manuel utilisateur
D-Link
D-Link DE-528CT Manuel utilisateur
D-Link
D-Link DWA-525 Manuel utilisateur
D-Link
D-Link DWM-156 Manuel utilisateur
D-Link
D-Link DWA-137 Manuel utilisateur
D-Link
D-Link DHN-120 Manuel utilisateur
