D-Link DUB-E100 Manuel utilisateur
D-Link™ DUB-E100
USB 2.0 Fast Ethernet Adapter
Manual
First Edition (June 2007)
Printed in Taiwan
RECYCLABLE
Table of Contents
INTRODUCTION..............................................................3
System Requirements ......................................................3
Features ...........................................................................3
INSTALLATION ...............................................................4
Unpack and Inspect..........................................................4
Installing the Adapter........................................................4
connecting the network cable………………………………3
software installation………………………………………….4
TROUBLESHOOTING...................................................19
SPECIFICATIONS .........................................................23
1
Introduction
Thank you for choosing the D-Link DUB-E100. The D-Link DUB-E100 is a Hi-Speed USB 2.0 10/100Mbps
Fast Ethernet Adapter specifically designed to plug into an available Universal Serial Bus (USB) port on a
desktop or laptop PC running Microsoft Windows Vista, XP, Server 2003, 2000,ME 98SE ,Mac OS X, and
Linux. Based on USB 2.0, the DUB-E100 extends the transfer speed of earlier USB Fast Ethernet adapters
to true 10/100Mbps connectivity. Power for the DUB-E100 is provided directly by the USB bus, eliminating
the need for an external power adapter. It also supports USB's energy saving suspend and resume
functions to minimize power consumption, which is especially useful for laptop/notebook users.
System Requirements
Before installing the DUB-E100, check your system for the following minimum configuration requirements.
200MHz or above based computer with a minimum of 32MB RAM
One available USB port
Windows Vista x64/86, XP x32/x64 Edition, Server 2003 x32/x64 Edition, 2000, Me, 98SE, Linux or
Mac OS X
Features
Designed for versatility and performance, the DUB-E100 USB 2.0 Fast Ethernet Adapter provides the
following:
•Compliant with USB 2.0 and USB 1.1 specifications
•Universal Bus support 3.3V
•Compliance with IEEE 802.3u Fast Ethernet standards and IEEE 802.3 Ethernet standards.
•Plug-and-Play installation
•Supports half and full duplex at 10Mbps, half and full-duplex at 100Mbps.
•One built-in RJ-45 connector
•Auto-negotiation to the highest available speed
•Two LED indicators: Link/ TX/RX
•Driver support:
√Microsoft Windows Vista (x86 ,x64) √Linux (kernel 2.6.9~13)
√Microsoft Windows XP (x32/x64 Edition) √Linux (kernel 2.6.14 & above)
√Microsoft Windows Server 2003 (x32/x64
Edition)
√Macintosh OSX (10.x)
√Windows 98SE/ME
√Microsoft Windows 2000
1
2
Installation
Unpack and Inspect
Open the shipping carton and carefully remove all items. Ensure that the following items are included:
•One DUB-E100 USB 2.0 Fast Ethernet Adapter
•DUB-E100 Drivers and Manual on CD-ROM
•Quick Installation Guide
If any of these items are missing or damaged, please contact your local reseller for replacement.
Installing the Adapter
Plug the DUB-E100’s USB cable into an available USB port on your computer.
Windows will detect new hardware and prompt you for the drivers. The installation process varies slightly for
each operating system. Insert the DUB-E100 CD into your CD-ROM drive. Then proceed to the appropriate
installation section on the following pages for your operating system.
2
Connecting the Network Cable
A. Attach an Ethernet cable to the Ethernet port on the DUB-E100.
B. Attach the other end of the Ethernet cable to your network switch, hub, or router.
3
Software Installation
Insert the DUB-E100 CD into your CD-ROM drive. Then proceed to the appropriate installation section
on the following pages for your operating system.
Windows Vista x64/86
Windows Vista driver installation is complete. Now you may connect the DUB-E100 to a network using an
Ethernet cable.
4
Software Installation (continued)
Windows XP
For Windows XP 64 Edition
For Windows XP 32 Edition
5
Software Installation (continued)
Windows XP driver installation is complete. Now you may connect the DUB-E100 to a network using an
Ethernet cable.
Windows 2000
6
Software Installation (continued)
7
Software Installation (continued)
Windows 2000 driver installation is complete. Now you may connect the DUB-E100 to a network using an
Ethernet cable.
Windows 2003
For Windows Server 2003 x64 Edition
8
Autres manuels pour DUB-E100
13
Table des matières
Autres manuels D-Link Adaptateur
D-Link
D-Link DWM-152 Manuel utilisateur
D-Link
D-Link 802.11g Wireless LAN USB Adapter DWL-G122 Manuel utilisateur
D-Link
D-Link DUB-1312 Manuel utilisateur
D-Link
D-Link DWM-156 Manuel utilisateur
D-Link
D-Link Vectra VL410 Manuel utilisateur
D-Link
D-Link G120 - DNS NAS Server Manuel utilisateur
D-Link
D-Link AC1300 Manuel utilisateur
D-Link
D-Link Air DWL-120 Manuel utilisateur
D-Link
D-Link DWA-510 Manuel utilisateur
D-Link
D-Link DFE-538TX Instructions de montage
D-Link
D-Link DWA-552 Manuel utilisateur
D-Link
D-Link WA181A1 Manuel utilisateur
D-Link
D-Link DHP-329AV Manuel utilisateur
D-Link
D-Link DGE-528T Manuel utilisateur
D-Link
D-Link AirPlus DWL-120+ Manuel utilisateur
D-Link
D-Link DHP-541 Manuel utilisateur
D-Link
D-Link DVG-2101sp Manuel utilisateur
D-Link
D-Link DFE-530TX Manuel utilisateur
D-Link
D-Link DWM-156 Manuel utilisateur
D-Link
D-Link DWA-130 Manuel utilisateur
