Cypress CY3280-CPM1 Manuel utilisateur

CY3280-CPM1 CapSense® Plus Module

Development Kit Quick Start Guide

Doc. # 001-51974 Rev. *A

Cypress Semiconductor

198 Champion Court

San Jose, CA 95134-1709

Phone (USA): 800.858.1810

Phone (Intnl): 408.943.2600

http://www.cypress.com

Semiconductor Corp. All other trademarks or registered trademarks referenced herein are property of the

respective corporations.

Cypress Semiconductor Corporation

198 Champion Ct., San Jose, CA 95134 USA

www.cypress.com

If you have questions, call

Cypress Customer Support

+1 (800) 541-4736 Ext. 8 (in the USA),

+1 (408) 943-2600 Ext. 8 (International),

or visit www.cypress.com/go/support

Doc. # 001-51974 Rev. *A

3. Program the RTC lab hex file to the CY3280-22x45 board. Refer to the quick start

guide of CY3280-22x45 UCC board for detailed program procedure.

4. Unplug the MiniProg from the CY3280-22x45 board.

5. Disconnect JP3 and JP4 of CY3280-CPM1 board.

6. Power the CY3280-22x45 board.

5. Test the Board

The elapsed time is displayed on the LED panel in real time. You can also test the

board with the other code examples available on the CD.

6. Design Support and Resources

A wealth of information about PSoC Designer™ and CapSense are available on

www.cypress.com. For knowledge base articles, customer forums, and online

application support, visit www.cypress.com/support.

1. Kit Contents

Each CY3280-CPM1 CapSense®Plus Module Development Kit contains:

■CY3280-CPM1 CapSense Plus Module Board

■CY3280-CPM1 Kit CD

■Quick Start Guide

Universal CapSense Module boards are available for purchase separately. For more

information, visit http://www.cypress.com/shop.

Prerequisites:

■CY3280-22x45/CY3280-28xxx Universal CapSense Controller Board

■PSoC MiniProg

■USB Mini-B Cable

2. Module Hardware

Buttons

Thermistor

40-Pin

Connector

Loopback Jumper for

SPI Communication Potentiometer

Reserved for

Speaker Driver

Reserved for

Speaker

LED Bar

LEDs

LED Panel

Reserved for

Thermocouple

Page 2 Page 3

The module board consists of an LED panel, a potentiometer, an LED bar, six LEDs, a

thermistor, and two buttons. These are interfaced to the CapSense Controller board

via a 40-pin receptacle connector (J2). The board also consists of two loop-back

connection jumpers (JP3 and JP4) to demonstrate the variable length SPI master-

slave communication.

3. Getting Started

CY3280-CPM1 kit can be connected to the CY3280-22x45 or CY3280-28xxx

Universal CapSense Controller boards. Insert the kit CD into the CD/DVD drive of your

PC and follow the instructions to complete the installation.

4. Board Setup

This section uses one example firmware to demonstrate the setup of CY3280-CPM1

with CY3280-20x45 Universal CapSense Controller board. Similar procedure is

followed for the CY3280-28xxx board. Refer to the CY3280-CPM1 kit guide for more

examples.

4.1 Real Time Clock (RTC) Setup

1. Connect the CY3280-CPM1 board to the CY3280-22x45 Universal CapSense

Controller board's P2 receptacle connector.

2. Connect your PC to the CY3280-22x45 Universal CapSense Controller board's

ISSP connector (J3) using a PSoC MiniProg and an USB cable.

1. Kit Contents

Each CY3280-CPM1 CapSense®Plus Module Development Kit contains:

■CY3280-CPM1 CapSense Plus Module Board

■CY3280-CPM1 Kit CD

■Quick Start Guide

Universal CapSense Module boards are available for purchase separately. For more

information, visit http://www.cypress.com/shop.

Prerequisites:

■CY3280-22x45/CY3280-28xxx Universal CapSense Controller Board

■PSoC MiniProg

■USB Mini-B Cable

2. Module Hardware

Buttons

Thermistor

40-Pin

Connector

Loopback Jumper for

SPI Communication Potentiometer

Reserved for

Speaker Driver

Reserved for

Speaker

LED Bar

LEDs

LED Panel

Reserved for

Thermocouple

Page 2 Page 3

The module board consists of an LED panel, a potentiometer, an LED bar, six LEDs, a

thermistor, and two buttons. These are interfaced to the CapSense Controller board

via a 40-pin receptacle connector (J2). The board also consists of two loop-back

connection jumpers (JP3 and JP4) to demonstrate the variable length SPI master-

slave communication.

3. Getting Started

CY3280-CPM1 kit can be connected to the CY3280-22x45 or CY3280-28xxx

Universal CapSense Controller boards. Insert the kit CD into the CD/DVD drive of your

PC and follow the instructions to complete the installation.

4. Board Setup

This section uses one example firmware to demonstrate the setup of CY3280-CPM1

with CY3280-20x45 Universal CapSense Controller board. Similar procedure is

followed for the CY3280-28xxx board. Refer to the CY3280-CPM1 kit guide for more

examples.

4.1 Real Time Clock (RTC) Setup

1. Connect the CY3280-CPM1 board to the CY3280-22x45 Universal CapSense

Controller board's P2 receptacle connector.

2. Connect your PC to the CY3280-22x45 Universal CapSense Controller board's

ISSP connector (J3) using a PSoC MiniProg and an USB cable.

CY3280-CPM1 CapSense® Plus Module

Development Kit Quick Start Guide

Doc. # 001-51974 Rev. *A

Cypress Semiconductor

198 Champion Court

San Jose, CA 95134-1709

Phone (USA): 800.858.1810

Phone (Intnl): 408.943.2600

http://www.cypress.com

Semiconductor Corp. All other trademarks or registered trademarks referenced herein are property of the

respective corporations.

Cypress Semiconductor Corporation

198 Champion Ct., San Jose, CA 95134 USA

www.cypress.com

If you have questions, call

Cypress Customer Support

+1 (800) 541-4736 Ext. 8 (in the USA),

+1 (408) 943-2600 Ext. 8 (International),

or visit www.cypress.com/go/support

Doc. # 001-51974 Rev. *A

3. Program the RTC lab hex file to the CY3280-22x45 board. Refer to the quick start

guide of CY3280-22x45 UCC board for detailed program procedure.

4. Unplug the MiniProg from the CY3280-22x45 board.

5. Disconnect JP3 and JP4 of CY3280-CPM1 board.

6. Power the CY3280-22x45 board.

5. Test the Board

The elapsed time is displayed on the LED panel in real time. You can also test the

board with the other code examples available on the CD.

6. Design Support and Resources

A wealth of information about PSoC Designer™ and CapSense are available on

www.cypress.com. For knowledge base articles, customer forums, and online

application support, visit www.cypress.com/support.

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Cypress Semiconductor:

CY3280-CPM1

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Cypress Microcontrôleur

Cypress

Cypress S6J3200 Series Mode d'emploi

Cypress

Cypress CapSense Plus CY3280-CPM1 Manuel utilisateur

Cypress

Cypress CY3274-HV Manuel utilisateur

Cypress

Cypress PSoC CY8CPROTO-063-BLE Manuel utilisateur

Cypress

Cypress EZ-USB CYUSB3KIT-001 Manuel utilisateur

Cypress

Cypress S6E1C1 Series Manuel du propriétaire

Cypress

Cypress CY8C28623-24LTXI Manuel utilisateur

Cypress

Cypress FM0+ S6E1C-Series Manuel utilisateur

Cypress

Cypress EZ-USB FX3 CYUSB3KIT-001 Manuel utilisateur

Cypress

Cypress PSOC CY8CKIT-146 Manuel utilisateur

Cypress

Cypress EZ-USB AT2LP CY4615B Manuel utilisateur

Cypress

Cypress CY15FRAMKIT-002 Manuel utilisateur

Cypress

Cypress Traveo II Manuel utilisateur

Cypress

Cypress CY8CKIT-147 Manuel

Cypress

Cypress FM4 S6E2H Series Manuel utilisateur

Cypress

Cypress PSoC Manuel utilisateur

Cypress

Cypress FM4 Series Manuel utilisateur

Cypress

Cypress CY3274 Manuel utilisateur

Cypress

Cypress PSOC 1 Series Manuel utilisateur

Cypress

Cypress CY8CKIT-042-BLE Manuel utilisateur

Cypress

Cypress PSoC 4000 Series Manuel d'utilisation et d'entretien

Cypress

Cypress CY3276 Manuel utilisateur

Cypress

Cypress CY14NVSRAMKIT-001 Manuel utilisateur

Cypress

Cypress PSoC CapSense Manuel utilisateur

Manuels Microcontrôleur populaires d'autres marques

AMS

AMS AS7261 Demo Kit Manuel utilisateur

Novatek

Novatek NT6861 Manuel utilisateur

Espressif Systems

Espressif Systems ESP8266 SDK Guide de configuration

Nuvoton

Nuvoton ISD61S00 ChipCorder Mode d’emploi

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Manuel utilisateur

Texas Instruments

Texas Instruments Chipcon CC2420DK Manuel utilisateur

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Manuel utilisateur

NEC

NEC 78GK0S/K 1+ Series Instructions d'installation et d'utilisation

Mikroe

Mikroe SEMITECH N-PLC Click Instructions d'installation et d'utilisation

Intel

Intel Agilex Manuel utilisateur

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Manuel utilisateur

Texas Instruments

Texas Instruments TMS320F2837 D Series Manuel utilisateur

CYPRES

CYPRES CY14NVSRAMKIT-001 Manuel utilisateur

Texas Instruments

Texas Instruments INA-DUAL-2AMP-EVM Manuel utilisateur

Espressif Systems

Espressif Systems ESP8266EX Mode d'emploi

Abov

Abov AC33M8128L Manuel utilisateur

Laird

Laird BL654PA Manuel utilisateur

Silicon Laboratories

Silicon Laboratories C8051F800 Manuel utilisateur