CYP PU-515PLRX-2HCD Manuel utilisateur
PU-515PLRX-2HCD
HDBaseT™ LITE Receiver with dual HDMI output, Audio
De-embedding, PoC, RS-232 & 2-way IR (up to 60m)
OPERATION MANUAL
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of fi re,
electrical shock and injury to persons.
• To prevent fi re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
suffi cient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
RDV1 23/10/14 Preliminary Release
RDV2 31/10/14 Add YUV_420
CONTENTS
1. Introduction............................................ 1
2. Applications........................................... 1
3. Package Contents ................................ 1
4. System Requirements............................ 1
6. Operation Controls and Functions....... 3
6.1 Front Panel ........................................3
6.2 Rear Panel.........................................4
6.3 IR Cable Pin Assignments ................4
6.4 D-Sub 9 Pin Defi nition.......................5
7. Connection Diagram ............................ 6
8. Specifi cations ........................................ 7
9. Acronyms ............................................... 8
1
1. INTRODUCTION
The PU-515PLRX-2HCD Receiver allows uncompressed HDMI signals to
be transmitted over a Single CAT5e/6/7 cable. This device allows the
distribution of Video, Audio, Power over Cable (PoC), RS-232 and 2-
way IR control functionality over the same CAT5e/6/7 cable. These
combined HDMI and control signals can be transmitted up to lengths
of 60 metres. This variant of the PU-515-RX Receiver provides dual
HDMI outputs for added flexibility enabling distribution to 2 displays
within a zone and also provides both digital and analogue audio
outputs for local amplification.
2. APPLICATIONS
•Extending incoming signal from CAT5e/6/7 to HDMI outputs
•Extending incoming signal from CAT5e/6/7 to both analog and
digital audio outputs
• Lecture room/Showroom/Meeting room/Classroom display and
control
3. PACKAGE CONTENTS
•1 x HDMI Splitter with Audio over Single CAT5e/6/7 Receiver
•1 x IR Receiver
• Operation Manual
4. SYSTEM REQUIREMENTS
HDBaseT compatible Transmitter input and output display with HDMI
input jack.
5. FEATURES
Note:
1. The PoC function is designed for powering compatible Transmitter
units only—non-PoC Transmitter will need their own power supply.
Transmitters of another brand may not be compatible.
• HDCP 2.2 Compliant
• HDMI, HDCP, & DVI compliant
• Supports uncompressed video/audio up to 10.2Gbps
• Supports resolutions VGA~WUXGA, 480i~1080p, 4K
UHD@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2), 4K UHD@ 60Hz (YUV
4:2:0), 4K/2K@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2) and 4K/2K@ 60Hz
(YUV 4:2:0) dependent upon the output display’s EDID settings
• Receive uncompressed data over a single 60 m/328 ft CAT5e/6/7
cable
• Convergence: Video, Audio, PoC & Control (bi-directional IR &
RS-232 bypass)
• Provided with 24V DC power or powered from compatible PoC
Transmitter through CAT5e/6/7
• Supports Balanced analog audio output (R/L)
• Support coaxial digital audio up to 192kHz
3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWER
DC 24V CAT5e/6/7 IN IR 2
OUT
USB
IR 1
IN
1 2 3 4 5 6
1Power LED: This LED will illuminate when the device is connected to
a power supply.
2DC 24V: Plug the 24 V DC power supply into the unit and connect
the adaptor to an AC outlet. Only one side of power is needed to
activate both Transmitter and Receiver when both obtain the PoC
function.
4CAT5e/6/7 IN: Connect from the Transmitter unit with a Single
CAT5e/6 cable for receiving all data signals.
5IR IN: Connect to the supplied IR Receiver cables for IR signal
reception. Ensure that remote being used is within the direct line-
of-sight of the IR Extender.
6IR OUT: Connect to the supplied IR Blaster cable for IR signal
transmission. Place the IR Blaster in direct line-of-sight of the
equipment to be controlled.
7USB: This port is reserved for fi rmware update only.
4
6.2 Rear Panel
COAXIAL
OUT
RS-232
OUT
HDMI OUT 1 HDMI OUT 2
-
-
+
+
LR
1 2 3 3 4
1Balanced Analog R/L OUT: Connect to an amplifi er or active
speaker with 3.5mm terminal block jack for audio output.
2COAXIAL OUT: Connect to an amplifi er or active speaker with
coaxial cable for audio output.
3HDMI OUT 1/2: These slots are to connect with HDMI TV/Monitor for
output image display.
4RS-232 OUT: This slot is to connect with D-Sub 9-pin cable from
device equipment for receiving RS-232 commands.
6.3 IR Cable Pin Assignments
3
1
2
3
1
2
Power
IR Blaster Signal
NC
IR Signal
Power
Grounding
IR Receiver
IR Blaster
5
6.4 D-Sub 9 Pin Defi nition
Pin Defi ne TX/RX
1N/C
2TxD / RxD
3RxD / TxD
4N/C
5GND
6N/C
7N/C
8N/C
9N/C
6
7. CONNECTION DIAGRAM
1.5m
60°
7m
3m 3m
60°
m
POWER
DC 24V CAT5e/6/7 IN IR 2
OUT
USB
IR 1
IN
COAXIAL
OUT
RS-232
OUT
HDMI OUT 1HDMI OUT 2
-
-
+
+
LR
CAT5e/6 In
Link
IR1 Extender
IR2 Blaster
Power
DVD or Blu-ray Player
Compatible
Transmitter
Smart TV or
Game Console
Digital Audio
Output (Optical)
RS-232 Equipped
PC or Notebook
7
8. SPECIFICATIONS
Video Bandwidth 340MHz / 10.2Gbps
Input Ports 1x CAT5e/6/7, 1 x IR Extender
Output Ports 2 x HDMI, 1 x Coaxial,
1 x Balanced Analog (R/L),
1×IR Blaster, 1 x RS-232
CAT5e/6/7 Output Cable
Distance
Up to 60 Meters
HMDI Input/Output
Cable Distance
Up to 10 Meters@1080p or 5Meters@4K2K
HDMI output Resolution Up to 4K2K@24/25/30 & 50/60 YUV_420
Audio Sampling Rate Up to 96 kHz / Balanced Analog
Up to 192 kHz / Coaxial & HDMI
IR Frequency 30~50 kHz
ESD Protection Human body model:
±8kV (air-gap discharge)
±6kV (contact discharge)
Dimensions (mm) 145 (W) x 115 (D) x 30(H)/Jack Excluded
145 (W) x 128 (D) x 30(H)/Jack Included
Weight (g) 394
Chassis Material Aluminum
Silkscreen Color Black
Operating Temperature 0˚C ~ 40˚C / 32˚F ~ 104˚F
Storage Temperature -20˚C ~ 60˚C / -4 ˚F ~ 140 ˚F
Relative Humidity 20 ~ 90% RH (non-condensing)
Power Consumption 12w
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels CYP Récepteur
CYP
CYP PU-607BD-RX Manuel utilisateur
CYP
CYP CH-1529RXPLV Manuel utilisateur
CYP
CYP CH-514RXWPL Manuel utilisateur
CYP
CYP PUV-1730PLRX-AVLC Manuel utilisateur
CYP
CYP PU-606PLBD-TX Manuel utilisateur
CYP
CYP CH-1604TXD Manuel utilisateur
CYP
CYP CDVI-301TX & RX Manuel utilisateur
CYP
CYP CH-1507TX Manuel utilisateur
CYP
CYP PU-607BD-RX Manuel utilisateur
CYP
CYP CH-2538TXPLWPKD Manuel utilisateur
CYP
CYP PU-DVI1109TX Manuel utilisateur
CYP
CYP CH-2603RX Manuel utilisateur
CYP
CYP CA-HDMI250R Manuel utilisateur
CYP
CYP CA-HDMI50R Manuel utilisateur
CYP
CYP Dante AU-DTO4-RX Manuel utilisateur
CYP
CYP CA-USBAT Manuel utilisateur
CYP
CYP 5Play PUV-1650TX Manuel utilisateur
CYP
CYP CA-USBST Manuel utilisateur
CYP
CYP CH-507RXWPL Manuel utilisateur
CYP
CYP PUV-3050RX-UA Manuel utilisateur
