CYP CDVI-301TX & RX Manuel utilisateur

CDVI-301TX & RX

DVI-D over One CAT6

Transmitter & Receiver

Operation Manual

CDVI-301TX & RX

Disclaimers

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no

responsibility for any infringements of patents or other rights of third

parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes

no commitment to update or to keep current the information

contained in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means

- electronic, mechanical, magnetic, optical, chemical, manual,

or otherwise - without express written permission and consent from

Cypress Technology.

Version 1.0 October 2010

Trademark Acknowledgments

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

Safety Precautions

Please read all instructions before attempting to unpack or install or

operate this equipment, and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

 Always follow basic safety precautions to reduce the risk of

re, electrical shock and injury to persons.

 To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

 Never spill liquid of any kind on or into this product.

 Never push an object of any kind into this product through

module openings or empty slots, as you may damage parts.

 Do not attach the power supply cabling to building surfaces.

 Do not allow anything to rest on the power cabling or allow it to

be abused by persons walking on it.

 To protect the equipment from overheating, do not block the

slots and openings in the module housing that provide ventilation.

Revision History

Version No Date Summary of Change

VR0 20110106 Preliminary Release

Table of Contents

1. Introduction..................................................................................1

2. Applications.................................................................................1

3. Package Contents ......................................................................1

4. System Requirements..................................................................1

5. Features........................................................................................1

6. Specifications ..............................................................................2

7. Operation Controls and Functions.............................................3

7.1 Front Panel....................................................................3

7.2 Rear Panel....................................................................3

7.3 Top Panel......................................................................3

8. Connection and Installation .....................................................4

9. Acronyms.....................................................................................5

1. Introduction

The DVI-D Transmitter and Receiver over One CAT6 is an intelligent device

for extending your DVI-D signal over long distances to a compatible display.

Instead of searching for lengthy DVI cables, your existing CAT6 cables can be

utilized to perform advanced functions, along with a bandwidth up to 2.25Gbps

per channel. Also, the device receives power through its USB connection,

while Receiver is powered by the CAT6 connection, which makes installing

and powering the Transmitter and Receiver more convenient. These devices

are hardware based with fast and easy installation and are perfectly suited for

common PC and notebook using.

2. Applications

• DVI-D signal extension over CAT6

• DVI-D signal transmitting over long distance

3. Package Contents

• DVI-D over CAT6 Transmitter

• DVI-D over CAT6 Receiver

• Operation Manual

• 2 x 5V/1A USB Power Adaptor

4. System Requirements

Input DVI-D signal source and output DVI-D input display with DVI connection

cables and CAT6 cable in between the transmitter and receiver device.

5. Features

• Supports digital video formats up to 36 bits

• Support high denition input/output up to WUXGA/1080p

• Uses one CAT6 cable for data/DDC transmission

• Equalizes and recovers incoming TMDS data before re-transmitting it in

optimal quality

• DVI Cable testing showed that with WUXGA/1080p 8bit resolution, input

or output device can run up to 12 meters away and with

WUXGA/1080p12bit resolution it can run up to 10 meters away

• When transmitting a signal in WUXGA/1080p 8bit resolution the CAT6

operating distance is 40 meters, and when the signal is in 12bit resolution

the CAT6 operating distance is 15 meters

•

It is recommended to use power adaptor on both transmitter and receiver

side to get the best performance and long distance operating.

• Using power adaptor on transmitter side only, receiver side powered over

CAT6 cable, the operating CAT6 cable distance will decrease to 20 meters

or less when transmitting 8bit signal.

Note:

A. This system was tested with CAT6 cable with its specication and result

follow:

24AWG/Standard/UTP/568B

1080p/8bit =25 meters

1080p/12bit =12meters

23AWG/Standard/UTP/568B

1080p/8bit =40 meters

1080p/12bit =15meters

Other cable types, the performance of this system may be different.

B. Cable distance tested with a PS3 & 40" Samsung LED UA40B700 12-bits

LCD TV.

C. Figures provided in this manual are for reference only, acutal gures

may depend on the source and display used along with the cable's

specications.

6. Specications

Transmitter

Input 1 x USB (for Power), 1 x DVI-D

Output 1 x CAT6

Receiver

Input 1 x USB (for Power), 1 x CAT6

Output 1 x DVI-D

Input Cable Distance 12M/ WUXGA or 1080p 8bit, 10M/ WUXGA or 1080p 12bit

Output Cable Distance 12M/ WUXGA or 1080p 8bit, 10M/ WUXGA or 1080p 12bit

CAT6 Cable Distance 40M/ WUXGA or 1080p 8bit, 15M/ WUXGA or 1080p 12bit

ESD Protection Human Body Model: ± 8kV (air-gap discharge)

± 4kV (contact discharge)

Operating Temperature 0ºC ~ 45ºC/ 32ºF ~104ºF

StorageTemperature -20ºC ~ 60ºC/ -4ºF ~140ºF

Relative Humidity 20~90% RH (non-condensing)

Power Consumption 3W/TX, 1.5W/RX

7. Operation Controls and Functions

7.1 Front Panel

Transmitter Receiver

DVI-D

1 2

DVI-D

OUT

q. DVI-D IN: This slot is to connect with source equipment such as PC or

graphic card for input signal sending.

w. DVI-D OUT: This slot is to connect with display monitor or TV for image

display.

7.2 Rear Panel

Transmitter Receiver

21 3

USB

5V CAT6 OUT USB

5V CAT6 IN

q. USB 5V: This slot is to connect with USB 5V power adaptor included in the

device’s package.

w. CAT6 OUT: This slot is to connect with CAT6 cable at the receiver side.

e. CAT6 IN: This slot is to connect with CAT6 cable from the transmitter side.

7.3 Top Panel

Transmitter Receiver

DVI-D TRANSMITTER

Intelligent Device

DVI-D RECEIVER

Intelligent Device

q. Power LED: The blue LED will illuminate when the device is connected

with power and detected the signal.

8. Connection and Installation

NB or PC

12M WUXGA/1080p 8bits

10M WUXGA/1080p 12bits

40M WUXGA/1080p 8bits

15M WUXGA/1080p 12bits

Display

12M WUXGA/1080p 8bits

10M WUXGA/1080p 12bits

Acronyms A

Acronym Complete Term

CAT6 Category 6 cable

DDC Display Data Channel

DVI-D Digital Visual Interface – Digital

TMSD Transition Minimized Differential Signaling

WUXGA Widescreen Ultra eXtended Graphics Array

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels CYP Récepteur

CYP

CYP PU-507RX-SCD Manuel utilisateur

CYP

CYP PUV-2606RX Manuel utilisateur

CYP

CYP PU-1109KIT Manuel utilisateur

CYP

CYP CH-527RXVBD Manuel utilisateur

CYP

CYP CH-507RXWPL Manuel utilisateur

CYP

CYP COH-TX1 Manuel utilisateur

CYP

CYP CH-2538TXPLWPKD Manuel utilisateur

CYP

CYP AVX-101F-RX Manuel utilisateur

CYP

CYP CH-2527TXV Manuel utilisateur

CYP

CYP CA-USBAT Manuel utilisateur

CYP

CYP PUV-2010TXWP Manuel utilisateur

CYP

CYP PRO-HDMIFO-4K Manuel utilisateur

CYP

CYP PU-607BD-RX Manuel utilisateur

CYP

CYP CH-507TXWPBD Manuel utilisateur

CYP

CYP DCT-30RX Manuel utilisateur

CYP

CYP CH-352RX Manuel utilisateur

CYP

CYP CH-A320RX Manuel utilisateur

CYP

CYP CA-HDMI100R Manuel utilisateur

CYP

CYP 5-Play HDBaseT PU-507WPRX Manuel utilisateur

CYP

CYP CH-107 RX Manuel utilisateur

CYP

CYP Dante AU-DTO4-RX Manuel utilisateur

CYP

CYP IP-A750RX Manuel utilisateur

CYP

CYP CH-1529RXPLV Manuel utilisateur

CYP

CYP CA-USBST Manuel utilisateur

Manuels Récepteur populaires d'autres marques

Garmin

Garmin GA 23 Manuel utilisateur

Aiphone

Aiphone PS-12F Manuel utilisateur

IMES

IMES TCS-01CA-PMI Manuel utilisateur

BWI Eagle

BWI Eagle AIR-EAGLE SR Manuel

AMIMON

AMIMON AMN12310 WHDI Manuel utilisateur

Dual

Dual DMCPA79BT Mode d'emploi

Sound Associates

Sound Associates SA652P Manuel utilisateur

Sherwood

Sherwood NewCastle R-772 Manuel utilisateur

Audio

Audio A10-RX Series Manuel utilisateur

AllSee

AllSee PushShare PSRV1.1 Manuel utilisateur

DEMAG

DEMAG DRC-DR D2 Manuel utilisateur

Teleco

Teleco TVRCL868A02 Manuel utilisateur

Bosch

Bosch RF3222E Manuel utilisateur

Kramer

Kramer 631R Manuel utilisateur

Xpress

Xpress xmc10 Manuel utilisateur

JVC

JVC KD-MR1BTS Manuel utilisateur

Omega Engineering

Omega Engineering UWTC-REC3 Manuel utilisateur

e-survey

e-survey E300 Pro Manuel utilisateur