CYP OR-HD88S Manuel utilisateur
Operation Manual
Operation Manual
CMSI-8H8HS
8 x 8 HDMI Matrix
OR-HD88S
3
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of fi re,
electrical shock and injury to persons.
• To prevent fi re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
suffi cient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE SUMMARY OF CHANGE
RDV1 11/11/2011 PreliMINary Release
RDV2 13/12/2011 Power Supply Change
CONTENTS
1. Introduction..............................................1
2. Applications.............................................1
3. Package Contents .................................. 1
4. System Requirements.............................. 1
5. Features....................................................1
6. Operation Controls and Functions......... 2
6.1 Front Panel ..........................................2
6.2 Rear Panel...........................................3
6.2 Rear Panel...........................................4
7. Remote Control........................................ 4
7.1 RS-232 Protocols ...............................10
7.2 RS-232 Commands...........................11
8. Connection Diagram ............................ 12
9. Specifi cations ........................................ 13
10. Acronyms .............................................14
1
1
1. INTRODUCTION
The 8 x 8 HDMI Matrix is a fabulous device for organizing and
distributing your HDMI signals. With 8 HDMI input ports and 8 HDMI
output ports this device allows a great amount of sources and display
to be used motivationally. Moreover, with plenty of control systems
such as IR, RS-232 and remote control allow user for all kinds of control
habit and occasion to be used. Further, the EDID control settings
unlocked the information display freely present.
2. APPLICATIONS
• Video/TV wall display
• Commercial advertising and displaying
• Lecture room display and control
• Hyper market demonstration and control
3. PACKAGE CONTENTS
•8 x8 HDMI Matrix
•24V/6.25A DC adaptor x1
•Remote control x1
•Operation manual
4. SYSTEM REQUIREMENTS
Input source equipments with HDMI connection cables and output
display or audio amplifi er equipments with HDMI connection cables.
5. FEATURES
• HDMI, HDCP1.1 and DVI compliant
• Supports HDMI v1.4 features:
√ 3D
• Supports audio sampling rate up to 192kHz
• Supports resolutions to VGA ~ WUXGA and 480i~1080p follow by
output display’s EDID
• Supports 3D signal display follow by display TV’s EDID
• Supports HDMI input up to 15 meters with 8bits resolution or 10
meters with 12bits resolution
• Supports IR extension
• Supports RS-232, remote control and on panel control
• 2U size design
2
2
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
1 2 3 4 5 6
1LCM
This monitor displays your setting information with each input
and output selection.
2Power button LED
Press this button to turn on the device and the green LED will
illuminate when the power is on. When the LED illuminate in red it is
in standby mode
3LOCK
Press this button to lock all the buttons on the panel. To unlock, just
press it again.
4IR
This IR window accepts the remote control signal of this device
only.
5Menu
Press this button once to select EDID setting from STD
(internal) 1 or TV (external) 2 then press it again to confi rm
the selection. Press this button every to confi rm the
selection.
61 ~8 /A ~ H & Out/In button
Press Out/In button fi rst to select the output/input then press
the number button to make the selection accordingly. For
example, output A ~ D wish to select input 1 and E ~ H wish
to select input 2. Press Out →A→B→C→D→In→1→Menu,
1 2 3 4 5 6
3
3
and then press Out →E→F→G→H→In→2→Menu. If the menu
button is not press the selection will not be changed.
6.2 Rear Panel
1 2 3 4 6 75
1LAN:
This slot is to connect with CAT5/6 cable from an IP router for on-
line fi rmware updating with a website designed by the device’s
designer. Or may be a control terminal on-link from a designate IP
address.
2RS-232:
This slot is to connect with D-Sub 9pin cable from the PC/NB device
for RS-232 control.
3IR-In: This slot is to connect with the IR extender included in the
package for IR signal receiving from the remote control of this
device.
4Service: This slot is to connect with USB cable for manufacturers’
fi rmware update only.
5HDMI OUT A~H: These slots are to connect with display or monitor
with HDMI cables for output image display.
6HDMI IN 1~8: These slots are to connect with input source
equipment such as Blu-ray player or Set-Up-Box with HDMI cable or
DVI to HDMI converter cable for input signal sending.
7DC24V: This slot is to plug the power cord with adaptor included
in the package and then connect them with AC wall outlet for
power supply.
4
4
6.3 Side Panel
1Ventilator: These are fan ventilator area, DO NOT block these area
or cover it with any object.
7. REMOTE CONTROL
H
8
1A
B
2
C
3
4D
5E
6F
7G
CR-110
IN OUT
1
2 3
1. Power:
Press this button to switch on the device or set it to standby mode.
2. IN:
Input ports selection 1~8.
3. OUT:
Output ports selection A~H.
5
5
7.1 RS-232 Protocols
Pin Assignment
CMSI-8H8HS
Remote Control Console
PIN Assignment PIN Assignment
1 NC 1 NC
2TX 2RX
3RX 3TX
4 NC 4 NC
5 GND 5 GND
6 NC 6 NC
7 NC 7 NC
8 NC 8 NC
9 NC 9 NC
Baud Rate: 19200bps
Data bit: 8 bits
Parity: None
Flow Control: None
Stop Bit: 1
OR-HD88S
6
6
7.2 RS-232 Commands
Command (Case Sensitive) Description
A1~A8 Switch output A to 1~8
B1~B8 Switch output B to 1~8
C1~C8 Switch output C to 1~8
D1~D8 SWITCH OUTPUT D TO 1~8
E1~E8 SWITCH OUTPUT E TO 1~8
F1~F8 SWITCH OUTPUT F TO 1~8
G1~G8 SWITCH OUTPUT G TO 1~8
H1~H8 SWITCH OUTPUT H TO 1~8
ABCD...1~ABCD...8 SWITCH OUTPUT ABCD... TO 1~8
P0 POWER OFF
P1 POWER ON
I1~I8 SWITCH ALL THE OUTPUT TO 1~8
Autres manuels pour OR-HD88S
1
Table des matières
Autres manuels CYP Commutateur matriciel
CYP
CYP CMPRO-U4H4CVPL Manuel utilisateur
CYP
CYP CMSI-8D8DS Manuel utilisateur
CYP
CYP nT14AX16 Manuel utilisateur
CYP
CYP MOD-16 Manuel utilisateur
CYP
CYP PRO-SDI44 Manuel utilisateur
CYP
CYP PUV-1082-4K22N Manuel utilisateur
CYP
CYP CDPS-44SM Manuel utilisateur
CYP
CYP CMSI-4H4CV Manuel utilisateur
CYP
CYP MA-421 Manuel utilisateur
CYP
CYP CMSDI-164 Manuel utilisateur
CYP
CYP CPLUS-V4H2HP-DT Manuel utilisateur
CYP
CYP CPLUS-V4H2HA Manuel utilisateur
CYP
CYP Elpro Video Labs CDPS-UC4H4HFS Manuel d'installation
CYP
CYP CMSI-8H8CVL Manuel utilisateur
CYP
CYP PUV-1082PL-4K22 Manuel utilisateur
CYP
CYP CPLUS-1082CVAL Manuel utilisateur
CYP
CYP CPLUS-V8H8HP Manuel utilisateur
CYP
CYP nT15GX01 Manuel utilisateur
CYP
CYP CDPS-U10H2HFS Manuel utilisateur
CYP
CYP CMSI-88 Manuel utilisateur
