CyberPower BPSE240V47A Manuel utilisateur

BPSE240V47A

BPSE240V47AOA

User’s Manual

K01-C000048-02

This manual contains important instructions. Please read and follow all

instructions carefully during installation and operation of the unit. Read

this manual thoroughly before attempting to unpack, install, or operate

the Battery modules.

CAUTION! The UPS unit must be connected to a grounded AC

SAFETY

power outlet with fuse or circuit breaker protection. The Battery

modules grounded are through the UPS.

CAUTION! The battery can power hazardous components

inside the unit, even when the AC input power is disconnected.

CAUTION! To prevent the risk of fire or electric shock, install in

a temperature and humidity controlled indoor area, free of

conductive contaminants. (Please see specifications for

acceptable temperature and humidity range).

CAUTION! (No User Serviceable Parts): Risk of electric shock,

do not remove cover. No user serviceable parts inside. Refer

servicing to qualified service personnel.

CAUTION! (Non-Isolated Battery Supply): Risk of electric

shock, battery circuit is not isolated from AC power source;

hazardous voltage may exist between battery terminals and

ground. Test before touching.

CAUTION! Wiring must be done by qualified personnel.

CAUTION! DO NOT USE WITH OR NEAR AQUARIUMS!

To reduce the risk of fire, do not use with or near aquariums.

Condensation from the aquarium can come in contact with

metal electrical contacts and cause the machine to short out.

CAUTION! Do not dispose of batteries in fire as the battery

may explode.

CAUTION! Do not open or mutilate the battery, released

electrolyte is harmful to the skin and eyes.

CAUTION! A battery can present a risk of electric shock and

high short circuit current. The following precaution should be

observed when working on batteries

1. Remove watches, rings or other metal objects.

2. Use tools with insulated handles.

CAUTION! Make sure everything is turned off and

disconnected completely before conducting any maintenance,

repairs or shipment.

CAUTION! Connect the Protection Earth (PE) safety conductor

before any other cables are connected.

DO NOT INSTALL THE UNIT WHERE IT WOULD BE EXPOSED

TO DIRECT SUNLIGHT OR NEAR A STRONG HEAT SOURCE!

SERVICING OF BATTERIES SHOULD BE PERFORMED OR

SUPERVISED BY PERSONNEL KNOWLEDGE OF BATTERIES

AND THE REQUIRED PRECAUTIONS. KEEP UNAUTHORIZED

PERSONNEL AWAY FROM BATTERIES!

The box should contain the following:

Battery Module

Battery Cable

User’s manual

UNPACKING

SCHEMATIC

FRONT/REAR PANEL DESCRIPTION

①.Output Connector: Use this output connector to connect the

Battery module and the Power module.

②.On-board Replaceable Fuse Cover: Replaceable fuse is accessible

from the rear panel. It must be done by qualified personnel.

③.Battery input Terminal Block: Use this input Terminal Block to

daisy chain the next Battery module.

④.Self- locking Frame

Fuse

Battery String 1 Battery String 2

BATT.OUTPUT+

BATT.INPUT+

BATT.INPUT-

BATT.OUTPUT-

BASIC OPERATION

CONNECTION#1: POWER MODULE(UPS) WITH ONE BATTERY

MODULE

Step 1: Connect the Battery Cable to the Power module and ensure

the polarity is right.

Step 2: Loosen the screws to remove the battery cable retention

bracket of the Battery module.

Step 3: Connect the Battery Cable to the Battery module.

Step 4: Rotate the battery cable retention bracket and tighten the

screws to fix battery cable.

CONNECTION#2: POWER MODULE(UPS) WITH MULTIPLE

BATTERY MODULES

Step 1: Loosen the screws to remove the input Terminal Block Cover

of the #1 battery module.

Step 2: Connect the Battery Cable to the battery input Terminal Block

and ensure the polarity is right, then retighten the Block Cover.

Step 3: Loosen the screws to remove the battery cable retention

bracket of the #2 battery module.

Step 4: Connect the #1 Battery module to the #2 Battery module.

#1 #2

Step 5: Rotate the battery cable retention bracket and tighten the

screws to fix battery cable.

Step 6: Connect the #1 Battery module to the Power module. (Refer

to above steps of connection#1)

UPS #1 #2

Model

BPSE240V47A

BPSE240V47AOA

Battery

Sealed Maintenance Free Lead

Acid Battery

12V / 7Ah x20pcs

x2sets

12V / 9Ah x20pcs

x2sets

Rated Battery Voltage

240Vdc

Overload Protection

Fuse

Physical

Maximum Dimensions

(HxWxD) (mm)

718x260x550

Weight (kg)

105

116

Environment

Operating Temperature

0C to 40C

Relative Humidity

0 to 90%(Non-condensing)

For more information, visit www.cpsww.com

TECHNICAL SPECIFICATION

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels CyberPower UPS

CyberPower

CyberPower UP625 Manuel utilisateur

CyberPower

CyberPower CSN27U12V Guide d'installation

CyberPower

CyberPower LE825G Manuel utilisateur

CyberPower

CyberPower 3000 VA Manuel utilisateur

CyberPower

CyberPower CP900D Manuel utilisateur

CyberPower

CyberPower OR1000ELCDRM1U Manuel utilisateur

CyberPower

CyberPower CyberShield CSN27U12V Manuel utilisateur

CyberPower

CyberPower OL6000RT3UTAA Manuel utilisateur

CyberPower

CyberPower RMCARD400 Manuel utilisateur

CyberPower

CyberPower EX650E Manuel

CyberPower

CyberPower CP1350PFCLCD Manuel utilisateur

CyberPower

CyberPower BRG1350AVRLCD Manuel utilisateur

CyberPower

CyberPower CyberShield DTC36U12V Manuel utilisateur

CyberPower

CyberPower CST1300ALU Manuel utilisateur

CyberPower

CyberPower CP900EPFCLCD Manuel

CyberPower

CyberPower UPS BR850ELCD Manuel utilisateur

CyberPower

CyberPower 649532210039 Manuel utilisateur

CyberPower

CyberPower UT650E-FR/UPS Manuel utilisateur

CyberPower

CyberPower UT1500 Manuel utilisateur

CyberPower

CyberPower BR450E Manuel utilisateur

CyberPower

CyberPower UPS 1200E Manuel utilisateur

CyberPower

CyberPower STANDBY UPS Series Manuel utilisateur

CyberPower

CyberPower CPS600E-IN Manuel utilisateur

CyberPower

CyberPower UT400EG Manuel utilisateur

Manuels UPS populaires d'autres marques

Pylontech

Pylontech Victron & Pylontech US5000 Manuel utilisateur

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Manuel utilisateur

Mecer

Mecer ME-1000-WTU Manuel utilisateur

Mustek

Mustek PowerMust 530(B) Plus Manuel d'installation et d'exploitation

Emerson

Emerson Liebert NXL series Manuel utilisateur

MAKELSAN

MAKELSAN BOXER SERIES Manuel utilisateur

Block

Block PC-0524-400-0 Manuel utilisateur

Eaton

Eaton 3S Instructions de montage

Best Power

Best Power 610 Manuel utilisateur

Best Power

Best Power Unity/I UT3K Manuel utilisateur

Mustek

Mustek PowerMust 400 Offline Manuel utilisateur

Xantrex

Xantrex Trace 512 UR-UPS Manuel utilisateur

Forza

Forza SL-1501UL Manuel utilisateur

LEGRAND

LEGRAND keor 310081 Manuel utilisateur

ABB

ABB Conceptpower DPA 500 Manuel utilisateur

ZincFive

ZincFive BC Series Manuel utilisateur

BPC

BPC 1.5K SMART Manuel utilisateur

IBM

IBM 5595-1AX Manuel utilisateur