CyberPower BPSE36V45A Manuel utilisateur

BPSE36V45A / BPSE72V45A

User’s Manual

K01- C000037-01

IMPORTANT SAFETY INSTRUCTIONS

This manual contains important instructions. Please read and follow all instructions carefully

during installation and operation of the unit. Read this manual thoroughly before attempting to

unpack, install, or operate the Battery modules.

CAUTION! The UPS unit must be connected to a grounded AC power outlet with fuse or circuit

breaker protection. The Battery modules grounded are through the UPS.

CAUTION! The battery can power hazardous components inside the unit, even when the AC

input power is disconnected.

CAUTION! To prevent the risk of fire or electric shock, install in a temperature and humidity

controlled indoor area, free of conductive contaminants. (Please see specifications for

acceptable temperature and humidity range).

CAUTION! (No User Serviceable Parts): Risk of electric shock, do not remove cover. No user

serviceable parts inside. Refer servicing to qualified service personnel.

CAUTION! (Non-Isolated Battery Supply): Risk of electric shock, battery circuit is not

isolated from AC power source; hazardous voltage may exist between battery terminals and

ground. Test before touching.

CAUTION! Wiring must be done by qualified personnel.

CAUTION! DO NOT USE WITH OR NEAR AQUARIUMS! To reduce the risk of fire, do not

use with or near aquariums. Condensation from the aquarium can come in contact with metal

electrical contacts and cause the machine to short out.

CAUTION! Do not dispose of batteries in fire as the battery may explode.

CAUTION! Do not open or mutilate the battery, released electrolyte is harmful to the skin and

eyes.

CAUTION! A battery can present a risk of electric shock and high short circuit current. The

following precaution should be observed when working on batteries

1. Remove watches, rings or other metal objects.

2. Use tools with insulated handles.

CAUTION! Make sure everything is turned off and disconnected completely before conducting

any maintenance, repairs or shipment.

CAUTION! Connect the Protection Earth (PE) safety conductor before any other cables are

connected.

DO NOT INSTALL THE UNIT WHERE IT WOULD BE EXPOSED TO DIRECT SUNLIGHT OR

NEAR A STRONG HEAT SOURCE!

SERVICING OF BATTERIES SHOULD BE PERFORMED OR SUPERVISED BY PERSONNEL

KNOWLEDGE OF BATTERIES AND THE REQUIRED PRECAUTIONS. KEEP

UNAUTHORIZED PERSONNEL AWAY FROM BATTERIES!

UNPACKING

The box should contain the following:

Battery Module

User’s manual

Battery Cable

BASIC OPERATION

FRONT/REAR PANEL DESCRIPTION

BPSE36V45A

BPSE72V45A

1. Input Connector

Use this input connector to daisy chain the next Battery module. Remove the connector cover for

access.

2. On-board Replaceable Fuse Cover

Replaceable fuse is accessible from the rear panel. It must be done by qualified personnel.

3. Battery Output Connector

Use this output Connector to connect the Battery module to the Power module or to the next

Battery module.

CONNECTION #1 : POWER MODULE(UPS) WITH ONE BATTERY MODULE

Step 1:Loosen the two screws to remove the battery cable retention bracket of the Power

module.

Step 2:Use the battery cable of the Battery module to connect the Battery module to the Power

module.

Step 3: Rotate the battery cable retention bracket and tighten the two screws to fix battery cable.

CONNECTION #2 : POWER MODULE(UPS) WITH MULTIPLE BATTERY

MODULES

Step 1:Connect the 1st Battery module to the Power module using battery cable. (Refer to above

steps of connection #1)

Step 2:Loosen the two screws to remove the battery cable retention bracket of the 1st battery

module.

Step 3:Use the battery cable to connect the 2nd Battery module to the 1st Battery module.

Step 4: Rotate the battery cable retention bracket and tighten the two screws to fix battery cable.

TECHNICAL SPECIFICATIONS

Model

BPSE36V45A

BPSE72V45A

Battery

Sealed Maintenance Free

Lead Acid Battery

12V / 7Ah x3pcs x2sets

12V / 7Ah x6pcs x2sets

Rated Battery Voltage

36Vdc

72Vdc

Overload Protection

Fuse

Physical

Maximum Dimensions

(HxWxD) (mm)

225 x 151 x 394

337 x 196 x416

Weight (kg)

17.2

34.2

Environment

Operating Temperature

0C to 40C

Relative Humidity

0 to 90% (Non-condensing)

For more information, visit www.cyberpower.com

Ce manuel convient aux modèles suivants

Autres manuels CyberPower UPS

CyberPower

CyberPower BU650E Manuel utilisateur

CyberPower

CyberPower PR1000LCD Manuel utilisateur

CyberPower

CyberPower CST1300AL Manuel utilisateur

CyberPower

CyberPower Value600EI-AU Manuel utilisateur

CyberPower

CyberPower 649532808007 Manuel utilisateur

CyberPower

CyberPower CyberShield CS75A12V3 Manuel utilisateur

CyberPower

CyberPower VP700EILCD Manuel utilisateur

CyberPower

CyberPower BPSE240V47A Manuel utilisateur

CyberPower

CyberPower CP1000D Manuel utilisateur

CyberPower

CyberPower Value1200EILCD Manuel utilisateur

CyberPower

CyberPower ValuePro VP700ELCD Manuel utilisateur

CyberPower

CyberPower OR500LCDRM1U Manuel utilisateur

CyberPower

CyberPower OR1000LCDRM1Ua Manuel utilisateur

CyberPower

CyberPower 649532815029 Manuel utilisateur

CyberPower

CyberPower Value 400E-GP Manuel utilisateur

CyberPower

CyberPower Surge Buster SB501BA-FR Manuel utilisateur

CyberPower

CyberPower 649532210046 Manuel utilisateur

CyberPower

CyberPower MBP60AHVIEC82U Manuel utilisateur

CyberPower

CyberPower UT1500EG Manuel utilisateur

CyberPower

CyberPower UR500 Manuel utilisateur

CyberPower

CyberPower 649532004850 Manuel utilisateur

CyberPower

CyberPower CP1350PFCLCD Manuel utilisateur

CyberPower

CyberPower BR650ELCD-UK Manuel utilisateur

CyberPower

CyberPower Value1200ELCD Manuel utilisateur

Manuels UPS populaires d'autres marques

Pylontech

Pylontech Victron & Pylontech US5000 Manuel utilisateur

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Manuel utilisateur

Mecer

Mecer ME-1000-WTU Manuel utilisateur

Mustek

Mustek PowerMust 530(B) Plus Manuel d'installation et d'exploitation

Emerson

Emerson Liebert NXL series Manuel utilisateur

MAKELSAN

MAKELSAN BOXER SERIES Manuel utilisateur

Block

Block PC-0524-400-0 Manuel utilisateur

Eaton

Eaton 3S Instructions de montage

Best Power

Best Power 610 Manuel utilisateur

Best Power

Best Power Unity/I UT3K Manuel utilisateur

Mustek

Mustek PowerMust 400 Offline Manuel utilisateur

Xantrex

Xantrex Trace 512 UR-UPS Manuel utilisateur

Forza

Forza SL-1501UL Manuel utilisateur

LEGRAND

LEGRAND keor 310081 Manuel utilisateur

ABB

ABB Conceptpower DPA 500 Manuel utilisateur

ZincFive

ZincFive BC Series Manuel utilisateur

BPC

BPC 1.5K SMART Manuel utilisateur

IBM

IBM 5595-1AX Manuel utilisateur