Crestron DM-TX-201-C Manuel utilisateur

The Crestron® DM-TX-201-C provides a versatile interface for computers

and high-definition AV sources as part of a complete Crestron

DigitalMedia™ system. It functions as a DM 8G+® transmitter and

switcher, providing HDMI®, VGA, and analog audio inputs along with

Ethernet and USB HID ports for a total connectivity solution.

In the Box

1 DM-TX-201-C, DigitalMedia 8G+® Transmitter 201

Install the Transmitter

The DM-TX-201-C can be mounted onto a flat surface or onto a rack rail.

Mount onto a Flat Surface

Using four mounting screws (not included), mount the device onto a flat

surface such as a wall or a ceiling.

DM-TX-201-C QuickStart

DigitalMedia 8G+® Transmitter 201

Mount onto a Rack Rail

The DM-TX-201-C can be mounted onto a front or rear rack rail. To

mount the device:

1. Position either of the mounting flanges so that the holes align with the

holes in the rack rail.

2. Secure the device to the rack rail using two rack mount screws (not

included).

Connect the Transmitter

Connect the device as required for the application.

NOTE: The DM OUT port is a PoDM (Power over DM) powered device

(PD) port and is also compatible with HDBaseT® PoE.

lIn order for the port to receive PoDM, the port requires connection

to a DigitalMedia™ switcher or other DigitalMedia equipment that

has a corresponding PoDM power sourcing equipment (PSE) port.

lIn order for the port to receive HDBaseT PoE, the port requires

connection to equipment that has a corresponding HDBaseT PoE

PSE port.

Wiring that is connected to a PoDM or HDBaseT PoE PSE port is for

intrabuilding use only.

PoDM, HDBaseT PoE, or the optional PW-2407WU power pack (sold

separately) can be used to power the device.

DM-TX-201-C QuickStart

DigitalMedia 8G+® Transmitter 201

Front and Rear Panel Connections

DM-TX-201-C QuickStart

DigitalMedia 8G+® Transmitter 201

Upgrade the Firmware

Before using the device, upgrade the firmware. The latest firmware can be

downloaded from the DM-TX-201-C product page on the Crestron

website (www.crestron.com).

Determine the IP Address

The physical configuration of the DM-TX-201-C within a DigitalMedia 8G+

system determines how the IP address of the transmitter is set:

lIf the transmitter is connected to a DigitalMedia switcher, the IP

address is configured by the switcher automatically. You do not need

to set the IP address.

lIf the transmitter is connected directly to a DigitalMedia 8G+ receiver

(commonly referred to as a standalone configuration in which no

DigitalMedia switcher is used), the IP address of the transmitter is

assigned using DHCP (Dynamic Host Configuration Protocol) by

default. If you wish to assign a static IP address, do either of the

following:

oTo assign the default static IP address of the transmitter, hold

down the SETUP button while the unit boots up. The default static

IP address, which is 192.168.1.236, overwrites the current setting.

oTo manually set a static IP address other than the default address,

use the Crestron Toolbox™ software.

DM-TX-201-C QuickStart

DigitalMedia 8G+® Transmitter 201

Visit the Product Page

Scan the QR code to visit the product page.

DM-TX-201-C

www.crestron.com/model/6503838

Additional Information

Original Instructions

The U.S. English version of this document is the original instructions.

All other languages are a translation of the original instructions.

Crestron product development software is licensed to Crestron dealers and Crestron

Service Providers (CSPs) under a limited nonexclusive, nontransferable Software

Development Tools License Agreement. Crestron product operating system software is

licensed to Crestron dealers, CSPs, and end-users under a separate End-User License

Agreement. Both of these Agreements can be found on the Crestron website at

www.crestron.com/legal/software_license_agreement.

The product warranty can be found at www.crestron.com/warranty.

The specific patents that cover Crestron products are listed at

www.crestron.com/legal/patents.

Certain Crestron products contain open source software. For specific information, visit

www.crestron.com/opensource.

Doc. 7719C

04/15/20

DM-TX-201-C QuickStart

DigitalMedia 8G+® Transmitter 201

Autres manuels pour DM-TX-201-C

Table des matières

Autres manuels Crestron Émetteur

Crestron

Crestron DM-TX-4K-202-C Manuel utilisateur

Crestron

Crestron Digitalmedia 8G+ Transmitter 401 Manuel utilisateur

Crestron

Crestron IM-TCC Comment utiliser

Crestron

Crestron DigitalMedia DMF-TX-4K-SFP Dessin dimensionnel

Crestron

Crestron QM-TX Manuel utilisateur

Crestron

Crestron IM-TCCV Guide de démarrage rapide

Crestron

Crestron DigitalMedia DMCF-TX-4K-SFP Dessin dimensionnel

Crestron

Crestron DigitalMedia 8G+ DM-TX-4KZ-202-C Manuel du propriétaire

Crestron

Crestron HD-TXCA-4KZ-101 Manuel utilisateur

Crestron

Crestron DM-TX-401-C Manuel utilisateur

Crestron

Crestron IM-FTCC-B Comment utiliser

Crestron

Crestron DM-TX-4K-202-C Manuel du propriétaire

Crestron

Crestron HD-TXC-4KZ-101 Manuel utilisateur

Crestron

Crestron DM-TX-200-C-2G Manuel utilisateur

Crestron

Crestron IM-WCVP Guide de démarrage rapide

Crestron

Crestron DM-TX-201-C Manuel du propriétaire

Crestron

Crestron DigitalMedia DM-TX-200-2G Comment utiliser

Crestron

Crestron DM-TX-401-S Manuel utilisateur

Crestron

Crestron DigitalMedia 8G+ DM-TX-4KZ-100-C-1G Manuel utilisateur

Crestron

Crestron DM-TX-4KZ-100-C-1G Manuel utilisateur

Crestron

Crestron DigitalMedia DM-TX-100F Manuel utilisateur

Crestron

Crestron DM-TX-4KZ-202-C Dessin dimensionnel

Crestron

Crestron DigitalMedia 8G 401 Series Dessin dimensionnel

Crestron

Crestron DigitalMedia 8G+ DM-TX-201-C Dessin dimensionnel

Manuels Émetteur populaires d'autres marques

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manuel du propriétaire

Honeywell

Honeywell 5816WMBR Manuel utilisateur

Kamstrup

Kamstrup READy MTU Mode d'emploi

Omega

Omega ZW Series Manuel utilisateur

ABB

ABB Field 264H Mode d’emploi

Alinco

Alinco DJ-V17T Manuel utilisateur

Dejero

Dejero EnGo 3x Manuel utilisateur

Rosemount

Rosemount 4600 Manuel utilisateur

Speaka Professional

Speaka Professional 2342740 Manuel utilisateur

trubomat

trubomat GAB 1000 Manuel utilisateur

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manuel utilisateur

Rondish

Rondish UT-11 Manuel utilisateur

MG 10JRE Manuel utilisateur

Burkert

Burkert 8177 Manuel utilisateur

Firetide

Firetide HotPort 3203 Manuel

Tele Radio

Tele Radio T9-02 Manuel utilisateur

Rotronic

Rotronic HygroFlex HF3 Series Manuel utilisateur

Jamara

Jamara FCX6 Pro Tel Manuel utilisateur