Crestron TST-600 Manuel utilisateur

Crestron TST-600

5.7” Wireless Touch Screen

Configuration Guide

The specific patents that cover Crestron products are listed at patents.crestron.com.

Crestron, the Crestron logo, and Rava are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other

countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and

names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in

typography or photography.

This document was written by the Technical Publications department at Crestron.

Crestron TST-600 5.7” Wireless Touch Screen

Configuration Guide – DOC. 7383D Contents

•

Contents

5.7” Wireless Touch Screen: TST-600 1

Access the Setup Screens........................................................................................................... 1

Configure the TST-600..............................................................................................................3

RF Setup ...................................................................................................................... 3

Audio Setup .................................................................................................................5

Display Setup .............................................................................................................. 5

Standby Timeout .........................................................................................................6

Networking Setup........................................................................................................ 7

Diagnostics ................................................................................................................ 13

About ......................................................................................................................... 14

Save & Exit ............................................................................................................... 14

Appendix A: The RF Spectrum .............................................................................................. 15

Appendix B: Optimum RF Reception Guidelines .................................................................. 16

Minimize Interference ............................................................................................... 16

Gateway Placement ................................................................................................... 16

Antenna Orientation .................................................................................................. 16

Crestron TST-600 5.7” Wireless Touch Screen

Configuration Guide – DOC. 7383D 5.7” Wireless Touch Screen: TST-600

•

5.7” Wireless Touch Screen:

TST-600

Access the Setup Screens

The main menu is the starting point for configuring the TST-600 from Crestron®.

NOTE: If no project has been loaded or if an invalid project has been loaded, the

TST-600 defaults to the main menu.

The setup screens enable basic configuration procedures prior to regular operation of

the TST-600.

If a project is running, the main menu can be accessed using one of three methods:

via the trigger keys on the top of the touch screen, via front panel buttons on the left

side of the touch screen or via Crestron Toolbox™.

Via the Trigger Keys 1. Press and hold the left trigger key on the top of the touch screen until the

unit resets (approximately 5 seconds).

2. When the display turns black, then displays a “3”, release the trigger key.

3. When “Loading Crestron Applications…” appears on the display, touch the

screen.

4. Release the touch screen when “Preparing to enter setup” appears.

Via Front Panel Buttons The main menu can also be accessed by pressing HOME, MEDIA, ▲and ▼, on

the left side of the touch screen display, in sequence twice (press HOME, MEDIA,

▲,▼, HOME, MEDIA, ▲,▼) within a 5 second period.

Via Crestron Toolbox

1. Establish communication with the touch screen.

2. Right-click on the device and select Functions | Setup Mode….

3. Select Enter Setup Mode. The main menu is displayed, as shown in the

illustration below.

NOTE: Select Exit Setup Mode to exit the setup menu.

5.7” Wireless Touch Screen Crestron TST-600

•

5.7” Wireless Touch Screen: TST-600 Configuration Guide – DOC. 7383D

TST-600 Main Menu

The main menu displays the current RF ID, RF Channel and battery status and is

also comprised of buttons for RF Setup, Audio Setup, Display Setup,Standby

Timeout, Networking Setup, and Diagnostics. In addition, there are buttons that

provide information about the touch screen and a Save & Exit button. The functions

of each are detailed in the next section of this guide.

Crestron TST-600 5.7” Wireless Touch Screen

Configuration Guide – DOC. 7383D 5.7” Wireless Touch Screen: TST-600

•

Configure the TST-600

RF Setup

From the main menu, touch RF Setup to display the “RF Setup” screen.

“RF Setup” Screen

The “RF Setup” screen has Acquired and GW Online indicators to show the status of

the TST-600 and associated gateway. To the right of these is a message display area

used to show the status of acquire processes, an Acquire button used to initiate

acquires and a bar graph showing RF signal strength. Below these are controls for

setting the RF ID, RF Channel, and RF Power. At the bottom of the screen, the

Gateway UID and Gateway Name are displayed.

Before a TST-600 can be used with a Crestron control system, it must first be

acquired by a CEN(I)-ERFGW-POE Extended Range RF Wireless Gateway (sold

separately).

To acquire a TST-600:

1. Use a stylus or other thin tipped object to press ACQUIRE on the

CEN(I)-ERFGW-POE gateway to enter Acquire mode. The accompanying

LED illuminates, indicating the unit is ready to link with the touch screen.

2. Place the TST-600 in Acquire mode by touching Acquire on the “RF

Setup” screen. The screen displays an Acquire in progress message and the

TST-600 is automatically acquired by the gateway within 2 minutes.

5.7” Wireless Touch Screen Crestron TST-600

•

5.7” Wireless Touch Screen: TST-600 Configuration Guide – DOC. 7383D

“RF Setup” (Acquire in progress) Screen

3. When the process is complete, the screen displays an Acquire OK message.

Press ACQUIRE on the gateway to exist Acquire mode. The LED turns

off.

“RF Setup” (Acquire OK) Screen

NOTE: Select an RF channel between 12 and 23 for maximum range. Channels 11,

24-26 will result in less range but are available if RF interference requires moving

the RF channel.

NOTE: The RF ID of the unit must match the RF ID specified in the SIMPL

Windows program.

For details, refer to “Appendix A: The RF Spectrum” on page 15 and “Appendix B:

Optimum RF Reception Guidelines” on page 16.

From any of the setup menus, touch to go back to the previous menu.

Crestron TST-600 5.7” Wireless Touch Screen

Configuration Guide – DOC. 7383D 5.7” Wireless Touch Screen: TST-600

•

Audio Setup

From the main menu, touch Audio Setup to display the “Audio Setup” screen.

“Audio Setup” Screen

The “Audio Setup” screen provides controls for muting (or unmuting) the audio,

adjusting level for both Master Volume and Media Volume, as well as a control for

playing a test audio file. The Media Volume controls adjust H.264 streaming media

level in relation to the Master Volume controls.

Touch to return to the main menu.

Display Setup

From the main menu, touch Display Setup to enter the “Display Setup” menu.

“Display Setup” Menu

The “Display Setup” menu provides controls for LCD (Screen) Brightness, Key

Backlight Brightness, and On and Off controls for Hard Key Wakes LCD.

5.7” Wireless Touch Screen Crestron TST-600

•

5.7” Wireless Touch Screen: TST-600 Configuration Guide – DOC. 7383D

Touch High, Med, & Low Settings to enter the “Display Setup - High, Med, & Low

Settings” screen.

“Display Setup – High, Med, & Low Settings” Screen

The “Display Setup - High, Med, & Low Settings” screen allows setting custom

values for the rapid access Low, Med and High buttons, used to control screen

brightness or key backlight brightness.

Touch to return to the “Display Setup” menu and touch it again to return to

the main menu.

Standby Timeout

From the main menu, touch Standby Timeout to display the “Standby Timeout”

screen.

“Standby Timeout” Screen

The “Standby Timeout” screen provides controls to adjust Standby timeout (from 0

to 120 seconds) and the Power Down timeout (from 0 to 240 seconds), both for when

Autres manuels pour TST-600

Table des matières

Autres manuels Crestron Écran tactile

Crestron

Crestron TS-1542 Manuel du propriétaire

Crestron

Crestron Isys TPS-4500 Manuel utilisateur

Crestron

Crestron TSW-570P Manuel utilisateur

Crestron

Crestron TSS-470E Manuel utilisateur

Crestron

Crestron TS-770 Manuel utilisateur

Crestron

Crestron V12 Manuel utilisateur

Crestron

Crestron TPMC-10 Manuel utilisateur

Crestron

Crestron Lsys TPS 2000L Manuel utilisateur

Crestron

Crestron TSW-770R Series Manuel utilisateur

Crestron

Crestron TSS-752 Manuel utilisateur

Crestron

Crestron C2N-FT-TPS4 Manuel utilisateur

Crestron

Crestron TPS-1700 Manuel utilisateur

Crestron

Crestron TPS-4500IMPC Manuel utilisateur

Crestron

Crestron SmarTouch ST-1700C Manuel utilisateur

Crestron

Crestron Isys TPMC-4SM Comment utiliser

Crestron

Crestron TSW-732 Manuel du propriétaire

Crestron

Crestron Isys i/O TPMC-4X Manuel utilisateur

Crestron

Crestron Isys TPS-6000 Manuel utilisateur

Crestron

Crestron Isys TPS-15G-QM Manuel utilisateur

Crestron

Crestron TPMC-V12 & TPMC-V15 Manuel utilisateur

Crestron

Crestron Isys TPS-5000 Manuel utilisateur

Crestron

Crestron TSW-560 Manuel du propriétaire

Crestron

Crestron Isys i/O TPMC-15-CH Manuel utilisateur

Crestron

Crestron STX-1550C Manuel utilisateur

Manuels Écran tactile populaires d'autres marques

FlowLine

FlowLine Data loop Manuel utilisateur

ALPEX

ALPEX AEx-8 P Series Manuel utilisateur

Ltech

Ltech E5S Manuel utilisateur

Harman

Harman AMX MODERO S MSD-701-L2 Manuel utilisateur

Acnodes

Acnodes PC 1150 Manuel utilisateur

AIS

AIS IP10IA99 series Manuel utilisateur

IBASE Technology

IBASE Technology ASTUT-152-RE1S Manuel utilisateur

YASKAWA

YASKAWA TP 610C Manuel utilisateur

B&R

B&R Power Panel C Series Manuel utilisateur

Beijer Electronics

Beijer Electronics X2 control Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT321W-521 Manuel utilisateur

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Manuel utilisateur

Qomo

Qomo QIT1386 Manuel utilisateur

DFI

DFI KS104-CD Manuel utilisateur

AMX

AMX AXP-PPC Mode d’emploi

Sartorius

Sartorius X3 PR 5410 Manuel utilisateur

AMX

AMX Modero X Series Manuel utilisateur

Advantech

Advantech TPC-30 Series Manuel utilisateur