Crestron Isys TPS-4000 Manuel utilisateur

Crestron Isys®TPS-4000

10.4 Inch Tilt Touchpanel

Operations Guide

This document was prepared and written by the Technical Documentation department at:

Crestron Electronics, Inc.

15 Volvo Drive

Rockleigh, NJ 07647

1-888-CRESTRON

All brand names, product names and trademarks are the property of their respective owners.

Crestron Isys®TPS-4000 10.4 Inch Tilt Touchpanel

Contents

10.4 Inch Tilt Touchpanel: Crestron Isys®TPS-4000 1

Introduction ...............................................................................................................................1

Features and Functions................................................................................................1

Specifications ..............................................................................................................3

Physical Description....................................................................................................5

Tilt Angle Tension Adjustment ...................................................................................7

Industry Compliance ...................................................................................................7

Setup ..........................................................................................................................................8

Network Wiring........................................................................................................... 8

Identity Code ...............................................................................................................9

Configuring the Touchpanel........................................................................................9

Hardware Hookup ..................................................................................................... 14

Recommended Cleaning............................................................................................16

Programming Software............................................................................................................17

Programming with the Crestron AppBuilder............................................................. 18

Programming with SIMPL Windows ........................................................................18

Programming with VisionTools®Pro-e.....................................................................22

Reserved Join Numbers............................................................................................. 26

MultiByte International Characters ...........................................................................27

Uploading and Upgrading........................................................................................................ 28

Communication Settings ...........................................................................................28

Uploading a SIMPL Windows Program....................................................................31

Uploading a VT Pro-e Project ................................................................................... 32

Firmware Upgrade..................................................................................................... 34

Problem Solving ......................................................................................................................36

Troubleshooting......................................................................................................... 36

Further Inquiries ........................................................................................................37

Future Updates .......................................................................................................... 37

Appendix A: Configuring the RS-232 Port for Use................................................................ 38

Obtaining Communications.......................................................................................38

Configuration Options...............................................................................................38

RS-232 Port Configuration........................................................................................ 38

Software License Agreement...................................................................................................40

Return and Warranty Policies .................................................................................................. 42

Merchandise Returns / Repair Service ...................................................................... 42

CRESTRON Limited Warranty.................................................................................42

Operations Guide - DOC. 6268 Contents •i

Crestron Isys®TPS-4000 10.4 Inch Tilt Touchpanel

10.4 Inch Tilt Touchpanel:

Crestron Isys®TPS-4000

Introduction

Features and Functions

The TPS-4000 packs all the power and performance of a Crestron Isys®panel in a

compact, stylish tilt model. Its compact stature makes the TPS-4000 perfect for the

home, especially in locations like home theaters, bedrooms and the home office.

Featuring a 10.4-inch (26.4 cm) active matrix display, the TPS-4000 uses the 65,536-

color Isys engine that allows all graphics to be displayed with incredible brightness

and depth.

TPS-4000 Functional Summary

• 10.4" (26.4 cm) diagonal active matrix color display

• 65,536 colors

• 640x480 screen resolution

• 16 Bit non-palette graphics

• 8 MB of Flash & 8 MB of DRAM memory

• Built-in time-based correction for stable video & graphics

• Balanced/unbalanced composite and S-video input; supports

NTSC/PAL formats

• Full screen video capability

• Up to 4,000 digital and 4,000 analog signals; Up to 999 serial signals

• Built-in microphone & two speakers (half duplex intercom capable)

• Stores and plays WAV sound files

• Stereo headphone jack

• Fast graphics performance: imported photographs, drawings, and icons

• Support for downloadable fonts – proportional* and non-proportional

• Foreign language text

• Display can be tilted between 30 and 80 degrees for optimum viewing

• Includes a TPS-IMPC for system connection

* Proportional fonts: the width of each character differs with the character shape, for example, the letter M

is wider than the letter I. All characters in non-proportional fonts are spaced equally.

Operations Guide - DOC. 6268 10.4 Inch Tilt Touchpanel: Crestron Isys®TPS-4000 •1

10.4 Inch Tilt Touchpanel Crestron Isys®TPS-4000

Multiple graphics can be displayed on the TPS-4000 without any shift in color depth

or quality. The TPS-4000 can display real-time video from any Crestron balanced

video distribution product or any balanced video, S-video or composite video source.

The TPS-4000’s audio capabilities include stereo audio speakers that offer volume

control, a built-in microphone with line-level output, built-in WAV sound file

capability and line-level input from other audio sources.

The TPS-4000 has the ability to transmit touch coordinates when “RS-232 Port for

Touch Output” is selected. Currently Telestrator devices are supported on the

TPS-4000. Refer to the “RS-232 Menu” section of “Configuring the Touchpanel” on

page 13 and “Appendix: Configuring the RS-232 Port for Use” on page 38 for

instructions on selecting this feature.

The purpose of the TPS-4000 touchpanel is to provide an economical replacement

for multiple controllers or older control panels having a complicated user interface in

either a Cresnet system or an RS-232 system with a series of simpler screens each

specific to the control problem at hand. Thus, a very large number of functions can

be made available to the user without the confusion associated with hardware panels

of that complexity. Icons, graphics, and text can dramatically increase any user's

comprehension of the control environment. Devices, functions, and control zones are

quickly organized and more easily accessed.

2 •10.4 Inch Tilt Touchpanel: Crestron Isys®TPS-4000 Operations Guide - DOC. 6268

Crestron Isys®TPS-4000 10.4 Inch Tilt Touchpanel

Specifications

The following provides a summary of specifications for the TPS-4000 touchpanel.

Specifications for the TPS-4000 Touchpanel

SPECIFICATION DETAILS

Power Requirements 22 Watts (0.92 Amp @ 24 VDC)

Default Network ID 03

Timeout Adjustable from 0 to 120 minutes (Default = 15

min.)

Signal Join Maximums 4000 Digital, 4000 Analog, 999 Serial

Control System Update

Files1,2,3

2-Series Control System Version C2.V2004.CUZ or later2,4

CEN/CN-TVAV Version 51130V.UPZ or later3,4

CNMSX-AV/PRO Version 51125X.UPZ or later3,4

CNRACKX/-DP Version 51125W.UPZ or later3,4

CNMS, CNRACK,

CNLCOMP

Version 3.18.09m, l, c or later or later3

ST-CP Version 4.02.4S.UPZ or later

Audio • Balanced (20 kΩ) & unbalanced (10 kΩ) line

level stereo input through 6-position mini-

terminal block connector

• Maximum input level 2 Vrms single ended,

4 Vrms differential with internal volume

control and two speakers

• Balanced line level microphone with AGC

output via 3-position mini- terminal block

connector

• Microphone Output Impedance: 600 Ohm

balanced / 300 Ohm Unbalanced

• Maximum Microphone Output: 1 Vrms single

ended, 2 Vrms differential

• Built-in WAV file (8bit 8kHz mono PCM type)

& key click capability5

• Speaker amplification: 2 Watts per channel

• Stereo headphone mini-phone jack on rear

of unit

Video • Direct Composite/S-video input through

TPS-IMPC/IMW, Balanced 100 Ω,

Unbalanced 75 Ω

• Built-in time base correction for stable video

• Video can be displayed full screen or in a

window

• NTSC and PAL supported

(continued on next page)

Operations Guide - DOC. 6268 10.4 Inch Tilt Touchpanel: Crestron Isys®TPS-4000 •3

10.4 Inch Tilt Touchpanel Crestron Isys®TPS-4000

Specifications for the TPS-4000 Touchpanel (continued)

SPECIFICATION DETAILS

Video (continued) • Supports still and full-motion video

• Brightness, contrast, hue and saturation

adjustments

Touchpanel Firmware TPS.V.2.060.0.csf or later

Memory 8MB internal flash memory, 8MB of DRAM

Screen Dimensions 10.4"/26.4 cm diagonal

Screen Viewing Angles: Y Dir. (X=0o): +45o(from top), -55o(from bottom)

X Dir. (Y=0o): +70o(from right), -70o(from left)

Screen Resolution 640 x 480 pixels

Color 16 Bit non-palette graphics with color key video

window capability, 65,536 colors

Display Type Touch-sensitive active matrix color LCD

Enclosure High impact, black molded plastic enclosure with

silver trim

CPU 63MIPs Coldfire processor running Isys generation

firmware

Cresnet Via TPS-IMPC (included) or optional TPS-IMW

RS-232 RJ-11 connector for console, telestrator, etc.

Default settings: 115200, 8 bit, parity none, stop

bit 1, XON/XOFF off, RTS/CTS off

Operating Temperature

and Humidity

50º to 113º F (10º to 45º C),

10 to 90% Relative Humidity (non-condensing)

Dimensions and Weight Height: 10.03 in (25.48 cm)

Width: 10.96 in (27.83 cm)

Depth: 7.21 in (18.31 cm)

Weight: 4.66 lbs (2.11 kg)

1 The latest versions can be obtained from the Downloads | Software Updates section of the Crestron

website (www.crestron.com). Refer to NOTE after last footnote.

2 Crestron 2-Series control systems include the AV2 and PRO2. Consult the latest Crestron Product

Catalog for a complete list of 2-Series control systems.

3 CNX update files are required for either CNMSX-AV/PRO or CNRACKX/-DP. Filenames for CNX

update files have a UPZ extension and ST-CP files are in one EXE or zipped UPZ file. To avoid

program problems, make certain you are using the update file with the correct suffix letter (e.g., S,

V, W, X).

4 When loading VT Pro-e files or firmware through the RS-232 port of the control system, be sure that

the baud rate is at 38400 (Cresnet speed) or lower. Otherwise, the Viewport may post the “Transfer

Failed” message.

5 WAV files reside in the touchpanel’s Flash memory and will affect the amount of available space for

touchpanel screens.

NOTE: Crestron software and any files on the website are for Authorized Crestron

dealers and Crestron Authorized Independent Programmers (CAIP) only. New users

may be required to register to obtain access to certain areas of the site (including the

FTP site).

4 •10.4 Inch Tilt Touchpanel: Crestron Isys®TPS-4000 Operations Guide - DOC. 6268

Crestron Isys®TPS-4000 10.4 Inch Tilt Touchpanel

Physical Description

The TPS-4000’s 10.4-inch (26.42 cm) touch sensitive viewing screen is located on

the front of the TPS-4000 touchpanel. The electronic hardware is housed in a high

impact, black molded plastic enclosure with silver accent as shown in the following

diagram. This touchpanel is designed for placement on a tabletop or other flat

surface. It has a hinged base, which can tilt from 30 to 80 degrees. For additional

information on the hinged base, refer to “Tilt Angle Tension Adjustment” on page 7.

All audio, RS-232, video, network, and power connections are made at the rear panel

on the base of the unit. A grille located on the front of the unit conceals two speakers

and the microphone is located at the top of the touchscreen.

NOTE: Video and network signals are connected to either the TPS-IMPC or

TPS-IMW touchpanel interface modules.

TPS-4000, Front View

Physical Views of the TPS-4000 Touchpanel (Front and Back)

10.96 in

(27.83 cm)

8.57 in

(21.77 cm)

10.03 in

(25.48 cm)

6.52 in

(16.54 cm)

Operations Guide - DOC. 6268 10.4 Inch Tilt Touchpanel: Crestron Isys®TPS-4000 •5

10.4 Inch Tilt Touchpanel Crestron Isys®TPS-4000

Physical Views of the TPS-4000 Touchpanel (Top and Bottom)

3.90 in

(9.91 cm)

0.75 in

(1.91 cm)

5.40 in

(13.72 cm)

7.21 in

(18.31 cm)

4.10 in

(10.41 cm)

Physical Views of the TPS-4000 Touchpanel (Side with Min. and Max. Angle)

10.03 in

(25.48 cm)

TILT ANGLE

30 TO 80

DEGREES

8.57 in

(21.77 cm)

6.86 in

(17.41 cm)

1.20 in

(3.04 cm)

1.40 in

(3.55 cm)

9.32 in

(23.67 cm)

Sound

The TPS-4000 has built-in speakers with power amplifiers. Sound can be generated

by the panel using downloaded wave files (.WAV) or can be mixed in from an

external line level audio source. The audio amplifiers output 2 Watts per channel.

Refer to “WAV File Audio Messages” on page 23 for WAV file details. There is a

built-in microphone in the touchpanel, which is amplified to produce a line level

differential output. The microphone amplifier has two modes, AGC or fixed gain.

The AGC is selectable using an internal join number. Refer to “Reserved Join

Numbers” on page 26 for more information.

A “Dynamic range” compression feature is provided for the TPS-4000. When

enabled, the audio amplifier gain is reduced dynamically for loud signal levels, thus

eliminating most distortion at the speakers. For quiet audio signals, the gain is not

reduced. When “Dynamic range” compression is turned off (default), the audio

amplifier gain remains fixed for all signal levels at the given volume setting.

6 •10.4 Inch Tilt Touchpanel: Crestron Isys®TPS-4000 Operations Guide - DOC. 6268

Table des matières

Autres manuels Crestron Écran tactile

Crestron

Crestron TPS-FPAR5000L Manuel utilisateur

Crestron

Crestron DualTouch DTT-17 Manuel utilisateur

Crestron

Crestron Isys i/O TPMC-15-CH-L Manuel utilisateur

Crestron

Crestron IM-WCCV Comment utiliser

Crestron

Crestron TPS-4500IMW Manuel utilisateur

Crestron

Crestron Isys TPS-6L Comment utiliser

Crestron

Crestron Isys TPS-15G-QM Manuel utilisateur

Crestron

Crestron TSD-2220 Dessin dimensionnel

Crestron

Crestron TSCW-730 Dessin dimensionnel

Crestron

Crestron Isys TPMC-12L Manuel utilisateur

Crestron

Crestron TPS-17B/W Manuel utilisateur

Crestron

Crestron Isys TPS-12 Manuel utilisateur

Crestron

Crestron Crestron Isys TPS 6000L Manuel utilisateur

Crestron

Crestron TSW-560 Manuel utilisateur

Crestron

Crestron TSW-550-TTK Dessin dimensionnel

Crestron

Crestron TSW-570 Manuel utilisateur

Crestron

Crestron Isys TPMC-4SM Comment utiliser

Crestron

Crestron SmarTouch STX-1700CW Manuel utilisateur

Crestron

Crestron TPS-FPAR4000L Manuel utilisateur

Crestron

Crestron Wallmount Touchpanel Manuel utilisateur

Crestron

Crestron QM-FTCC Comment utiliser

Crestron

Crestron Isys i/O TPMC-8X Manuel utilisateur

Crestron

Crestron TPMC-3X Series Manuel utilisateur

Crestron

Crestron FlipTop FT-TS600 Comment utiliser

Manuels Écran tactile populaires d'autres marques

FlowLine

FlowLine Data loop Manuel utilisateur

ALPEX

ALPEX AEx-8 P Series Manuel utilisateur

Ltech

Ltech E5S Manuel utilisateur

Harman

Harman AMX MODERO S MSD-701-L2 Manuel utilisateur

Acnodes

Acnodes PC 1150 Manuel utilisateur

AIS

AIS IP10IA99 series Manuel utilisateur

IBASE Technology

IBASE Technology ASTUT-152-RE1S Manuel utilisateur

YASKAWA

YASKAWA TP 610C Manuel utilisateur

B&R

B&R Power Panel C Series Manuel utilisateur

Beijer Electronics

Beijer Electronics X2 control Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT321W-521 Manuel utilisateur

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Manuel utilisateur

Qomo

Qomo QIT1386 Manuel utilisateur

DFI

DFI KS104-CD Manuel utilisateur

AMX

AMX AXP-PPC Mode d’emploi

Sartorius

Sartorius X3 PR 5410 Manuel utilisateur

AMX

AMX Modero X Series Manuel utilisateur

Advantech

Advantech TPC-30 Series Manuel utilisateur