Crestron Mercury CCS-UC-1 Manuel utilisateur

CCS-UC-1

Crestron Mercury™ Tabletop Conference

System with Microsoft®Lync®2013

Configuration Guide

Crestron Electronics, Inc.

Crestron product development software is licensed to Crestron dealers and Crestron Service Providers (CSPs) under a limited non-exclusive,

non-transferable Software Development Tools License Agreement. Crestron product operating system software is licensed to Crestron

dealers, CSPs, and end-users under a separate End-User License Agreement. Both of these Agreements can be found on the Crestron

website at www.crestron.com/legal/software_license_agreement.

The product warranty can be found at www.crestron.com/legal/sales-terms-conditions-warranties.

The specific patents that cover Crestron products are listed at www.crestron.com/legal/patents.

Certain Crestron products contain open source software. For specific information, visit www.crestron.com/legal/open-source-software.

Crestron, the Crestron logo, AirMedia, Crestron Mercury, and Crestron Toolbox are either trademarks or registered trademarks of Crestron

Electronics, Inc. in the United States and/or other countries. Microsoft, Lync, and Windows are either trademarks or registered trademarks of

Microsoft Corporation in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in

this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the

marks and names of others. Crestron is not responsible for errors in typography or photography.

This document was written by the Technical Publications department at Crestron.

Configuration Guide – DOC. 8255A Contents •i

Contents

Introduction 1

Audience ....................................................................................................................... 1

Topology ....................................................................................................................... 2

Software Requirements ................................................................................................. 2

Hardware Requirements................................................................................................ 2

Product Description 3

Summary 3

Features Supported....................................................................................................... 3

Features Not Supported ................................................................................................ 3

Known Issues and Limitations ....................................................................................... 4

Configuration 5

Mercury Configuration ................................................................................................... 5

Setup ...................................................................................................................... 5

Configure the Device............................................................................................... 5

Configure the SfB Parameters................................................................................. 6

Add Certificates ...................................................................................................... 7

Lync Configuration 9

Configure Host A record ................................................................................................ 9

Configure Users in the Active Directory........................................................................ 11

Configure a Crestron Mercury Lync 2013 User ............................................................ 13

Configure the PSTN Gateway...................................................................................... 14

Configure the Dial Plan ................................................................................................ 17

Configure Voice Policy ................................................................................................. 19

Configure PSTN Usage................................................................................................ 20

Configure a Route ....................................................................................................... 21

Configure a Trunk ........................................................................................................ 22

Configuration Guide – DOC. 8255A CCS-UC-1: Crestron Mercury with Lync 2013 •1

CCS-UC-1: Crestron Mercury™

Tabletop Conference System with

Microsoft®Lync®2013

Introduction

This configuration guide describes the necessary procedure to configure the Crestron

Mercury™ devices to register to Microsoft®Lync®2013 as an enterprise enabled Lync user.

Audience

This document is intended for users attempting to configure and use the Crestron Mercury

devices as Lync users registering to Lync 2013.

2•CCS-UC-1: Crestron Mercury with Lync 2013 Configuration Guide – DOC. 8255A

Topology

The network topology for the Crestron Mercury endpoint to interop with Lync 2013 is as

shown below.

SIP Endpoint Integration with Lync 2013 - Reference Network

The lab network consists of the following components:

•Lync 2013 cluster for voice features

•Lync desktop clients

•Crestron Mercury as the Lync Endpoints

Software Requirements

•Lync 2013 5.0.8308

•Mercury devices v 1.3557.00021

Hardware Requirements

•Windows®servers for Lync 2013 components

•Cisco 3845 as PSTN Gateway

•Lync desktop client 15.0.4971.1000

•Crestron Mercury devices (2)

Configuration Guide – DOC. 8255A CCS-UC-1: Crestron Mercury with Lync 2013 •3

Product Description

The Crestron Mercury device is a complete solution for conference rooms. It acts as an all-

in-one touch screen, speakerphone, and AirMedia®product for conference rooms that

provide microphones and speakers integrated into the user interface at the table.

Crestron Toolbox™ software is used to discover and control all Crestron devices on the

network.

The Crestron Mercury web interface is used to control the Crestron Mercury devices on the

network.

Summary

The Crestron Mercury devices were configured on the Lync 2013 as enterprise voice

enabled users. The devices successfully registered to the Lync 2013.

This topology is recommended for field deployments.

Features Supported

•Registration

•Basic calls with G711u codec

•Caller ID

•DTMF support

•Early media support

•Retrieval of a parked call

•Conference participant

•Call hold and resume

•Call waiting

•Conference

Features Not Supported

•Caller ID presentation with name and number display

•Call forwarding on the device

•Initiating attended call transfer

•Initiating semi-attended call transfer

•Initiating Blind Call Transfer

•Configuration of Shared Line on device

•Initiating Call Park

4•CCS-UC-1: Crestron Mercury with Lync 2013 Configuration Guide – DOC. 8255A

Known Issues and Limitations

•The Crestron Mercury device fails to register with Lync 2013 when the internal

server or external server is configured on the device.

•The Crestron Mercury device handles a transfer with two-way audio, but after the

transfer is complete, it drops the call.

•An attempt to add a PBX endpoint to a conference when the Crestron Mercury

device is already in a call with PSTN fails with an error informing that the PBX

endpoint is either unavailable or offline.

•The Crestron Mercury device does not play appropriate tones when it receives an

error code.

•The Crestron Mercury device is able to retrieve the call parked by the Lync 2013

desktop client and there is two-way audio. However, after retrieving the parked call,

the call control options disappear from the Crestron Mercury device’s display.

•A hunt group call fails when the Crestron Mercury device answers the call (the hunt

group call succeeds when the Lync 2013 desktop client answers).

•No music on hold is heard on the PBX endpoint when the Crestron Mercury device

places the call on hold.

•The Crestron Mercury device handles call waiting, but it does not provide an option

to put the current call on hold to answer a second incoming call. The Crestron

Mercury device has to hang-up the ongoing first call to answer the second call, or it

can reject the incoming second call.

•When media bypass is enabled on the PBX, media is not being anchored on the

Crestron Mercury device. Instead, the Mediation server anchors the media.

Configuration Guide – DOC. 8255A CCS-UC-1: Crestron Mercury with Lync 2013 •5

Configuration

Mercury Configuration

Setup

The LAN port of the Crestron Mercury device needs to be connected to one POE+ port to

power it up and be connected to the network for reachability to Lync 2013. The PoE+

switch that is used should have the LLDP functionality enabled for the device to power up

and be completely functional. By default, the “poeplus” configuration is set to Off on the

device.

Configure the Device

To configure the Crestron Mercury device, follow this procedure:

1. Access the web GUI for the device by using an http session with the device’s IP

address.

Crestron Mercury: Login to Web GUI

2. Click Sign In and log in to the device. For information on device administration,

refer to the CCS-UC-1 Supplemental Guide (Doc. 7844) at

www.crestron.com/manuals.

The Status screen that appears displays basic information on the device.

6•CCS-UC-1: Crestron Mercury with Lync 2013 Configuration Guide – DOC. 8255A

Crestron Mercury: Status

The device can be configured from the Network page.

3. On the web GUI, navigate to Network.

4. Enter the following parameters in the Adapter 1 section to configure the Crestron

Mercury device.

•Domain Name: tekvizioncw.com was used in this example

•DHCP Enabled: Choose either of the following:

oObtain an IP address automatically (On)

oUse the following IP address (Off)

For the example, a static IP was configured.

NOTE: The DNS Server 1 entry should be the DNS server where all the

Lync 2013 and the A & SRV records for Mercury are configured. In this

example, the DNS server on Domain Controller is used.

5. Click Save Changes.

Configure the SfB Parameters

To configure the SfB parameters, follow this procedure:

Autres manuels pour Mercury CCS-UC-1

Table des matières

Autres manuels Crestron Système de conférence

Crestron

Crestron Flex UC-B30-T-WM Manuel utilisateur

Crestron

Crestron UC-BX30-Z Manuel utilisateur

Crestron

Crestron UC-B31-Z Manuel utilisateur

Crestron

Crestron UC-BX31-T-WM Manuel utilisateur

Crestron

Crestron DM-NUX-L2-1G Manuel utilisateur

Crestron

Crestron UC-MX50-Z-UPGRD Manuel utilisateur

Crestron

Crestron FlipTop FT2 Series Manuel utilisateur

Crestron

Crestron UC-MM30-T Manuel utilisateur

Crestron

Crestron Horizon HZ-FP-G Series Manuel utilisateur

Crestron

Crestron UC-MM30-T Manuel utilisateur

Crestron

Crestron Mercury CCS-UC-1-T Manuel du propriétaire

Crestron

Crestron UC-MX50-Z Manuel utilisateur

Crestron

Crestron UC-M150-Z Manuel utilisateur

Crestron

Crestron CCS-UC-1-T-V Manuel utilisateur

Crestron

Crestron UC-MM30-A-T Manuel utilisateur

Crestron

Crestron UC-2-Z Manuel utilisateur

Crestron

Crestron UC-BX31-Z-WM Manuel utilisateur

Crestron

Crestron DMPS3-4K-350-C Manuel utilisateur

Crestron

Crestron SR Manuel du propriétaire

Crestron

Crestron UC-BX31-Z-WM Manuel utilisateur

Crestron

Crestron UC-MX50-Z Manuel utilisateur

Crestron

Crestron UC-BX31-T-INDIA Manuel utilisateur

Crestron

Crestron UC-M50-Z Manuel utilisateur

Crestron

Crestron UC-2-Z-I Manuel utilisateur

Manuels Système de conférence populaires d'autres marques

Kramer

Kramer VIA GO Manuel utilisateur

AVT

AVT MAGIC AC1 Go Manuel utilisateur

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Manuel utilisateur

Sony

Sony PCS-I150 Manuel utilisateur

Middle Atlantic Products

Middle Atlantic Products VTC Series Manuel utilisateur

Prentke Romich Company

Prentke Romich Company Vanguard Plus Mode d’emploi

Speakerbus

Speakerbus iD 712 Manuel utilisateur

Trelleborg

Trelleborg SafePilot CAT PRO Manuel utilisateur

Sennheiser

Sennheiser ADN Manuel utilisateur

ADTRAN

ADTRAN NetVanta 7100 Manuel utilisateur

AINA

AINA PTT Voice Responder Manuel utilisateur

Yamaha

Yamaha ProjectPhone PJP-100H Manuel utilisateur

vissonic

vissonic VLI Series Manuel utilisateur

Panasonic

Panasonic KX-VC500 Manuel utilisateur

Poly

Poly Trio 8300 Manuel utilisateur

Inmarsat

Inmarsat mini M Manuel utilisateur

Tenveo

Tenveo ALL-IN-ONE Manuel utilisateur

AXIWI

AXIWI AT-350 Manuel utilisateur