Creativity Elf Core XY Manuel utilisateur
ShenZhen Creative3D Technology Co.,Ltd
E L F
Core XY
3D Printer
USER MANUAL
Do not place the Printer near flammables, explosives or heat sources. It is best to place it in a
well-ventilated, low-dust environment.
Do not expose the Printer to violent vibration or any unstable environment. This will cause poor
print quality.
The filaments recommended by the manufacturer are preferred as to avoid clogging in the
hot end and/or Printer damage.
Do not use any other power cable than the one supplied. Use a grounded three-prong power
outlet.
Do not touch the nozzle or hot bed during printing. Keep hands away from machine while in
use to avoid burns or personal injury.
Do not wear gloves or loose clothing when operating the Printer. These loose articles can
become caught in moving parts and cause personal injury or Printer damage.
Clean off filament from the nozzle tip with the provided pliers before the nozzle cools. Do not
touch the nozzle directly. This can cause personal injury.
Clean the Printer frequently. With the machine powered off, clean the printer body with a dry
cloth to remove dust, adhered printing materials and foreign objects on guide rails. Use glass
cleaner or isopropyl Alcohol to clean the print surface before every print for consistent results.
Children under 12 years of age should not use the Printer without supervision.
Attentions
Safety Instructions
1
2
Preparation List
M5*25
*4
M5*10
*4
2020-L560
*4
2020-L440
*2
Main
controller
*1
Step 1
3
Preparation List
M4*8
*16
M3*8
*6
Anti-Backlash
Nuts-1
*2
Flange
bearing
*4
Hot Bed
Support part
*2
4
Step 2
Preparation List
M5*20-P
Coupling
*2
Optical
axis
*4
Secure
blocks
*2
Setp2 part
*2
5
Step 3
Table des matières
Autres manuels Creativity Imprimante 3D
