CraftBot PLUS PRO Manuel utilisateur

CRAFTBOT PLUS PRO AND CRAFTBOT XL

DOME INSTALLATION MANUAL

CRAFTBOT PLUS PRO AND CRAFTBOT XL

DOME INSTALLATION MANUAL

www.craftbot.com

1. INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2. ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

3. INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

3. FIRMWARE SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

TABLE OF CONTENTS

CRAFTBOT PLUS PRO AND CRAFTBOT XL

DOME INSTALLATION MANUAL

www.craftbot.com

1. INTRODUCTION

For best print quality, some ﬁlaments may need to stabilize the build area temperature. This can signiﬁcantly reduce

the possibility of warping printed objects.

That’s why we also oﬀer the elegant and durable printer cover and door for Crabot printers.

The CraBot XL and the CraBot Plus Pro domes are identical, so we are showing the CraBot Pro Plus assembly.

This manual walks you through the steps of installing the dome.

CRAFTBOT PLUS PRO AND CRAFTBOT XL

DOME INSTALLATION MANUAL

www.craftbot.com

2. ACCESSORIES

Below you can see contents of the box. First of all, check the list to make sure nothing is missing!

1. Assembled dome with fan (1x)

2. Filament holder (1x)

3. Filament guide tube (1x)

Tools needed:

• 2.5mm allen key

• 10 mins

3. INSTALLATION

Please follow the steps listed below to install the dome.

• Remove the ﬁlament spool holder.

• Remove the FMS sensor.

• Remove the screws marked with an arrow on the top cover of the printer. (4x)

• Aach the ﬁlament spool holder to the indicated position.

• Aach the FMS sensor to the indicated position.

CRAFTBOT PLUS PRO AND CRAFTBOT XL

DOME INSTALLATION MANUAL

www.craftbot.com

• Place the dome to the printer. Please be sure, the cover sits properly on the printer’s top cover.

• Fasten the front of the dome. Use the previously removed screws. (4x)

• Aach the ﬁlament guide tube supplied with the dome.

• Insert the tube back into the extruder.

CRAFTBOT PLUS PRO AND CRAFTBOT XL

DOME INSTALLATION MANUAL

www.craftbot.com

• Connect the FMS sensor.

• Connect the dome fan.

CRAFTBOT PLUS PRO AND CRAFTBOT XL

DOME INSTALLATION MANUAL

www.craftbot.com

3. FIRMWARE SETTINGS

• In the temperature seing menu, by pressing the icon, the dome cover seings menu will be displayed.

• Here, with the ON / OFF buon, you can enable or disable the operation of the dome fan. This feature seing will

not change when the printer is turned oﬀ and on.

CraBot is made in the EU.

CONTACT:

CraUnique Ltd.

Salgótarjáni str. 12-14.

Budapest 1087, Hungary

Phone: +36 1 700 8060

Web: www.crabot.com • www.crabotusa.com

Cooperation between 3D printer and people has never been easier.

Get in touch!

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels CraftBot Imprimante 3D

CraftBot

CraftBot FLOW WIDE XL Manuel utilisateur

CraftBot

CraftBot CB4 FLOW Series Manuel utilisateur

CraftBot

CraftBot Flow Manuel utilisateur

CraftBot

CraftBot Plus Manuel utilisateur

CraftBot

CraftBot FLOW IDEX XL Manuel utilisateur

CraftBot

CraftBot CB4 FLOW Series Manuel utilisateur

CraftBot

CraftBot FLOWGENERATION FLOW Manuel utilisateur

CraftBot

CraftBot FLOW IDEX DOME Manuel utilisateur

CraftBot

CraftBot Flow Manuel utilisateur

CraftBot

CraftBot PLUS PRO Manuel utilisateur

CraftBot

CraftBot FLOW GENERATION IDEX Manuel utilisateur

Manuels Imprimante 3D populaires d'autres marques

Ultimaker

Ultimaker S5 Material Station Manuel utilisateur

EcubMaker

EcubMaker TOYDIY Manuel utilisateur

AnyCubic

AnyCubic Kossel Plus Manuel utilisateur

ReDeTec

ReDeTec ProtoCycler Manuel utilisateur

Kywoo3D

Kywoo3D Tycoon IDEX Manuel utilisateur

3DGence

3DGence INDUSTRY F340 Manuel utilisateur

HP Jet Fusion 4200 Mode d'emploi

Rokit

Rokit AEP Series Manuel utilisateur

AnkerMake

AnkerMake M5 Manuel utilisateur

DIYElectronics

DIYElectronics PRUSA I3 Instructions de montage

Ackuretta

Ackuretta FreeShape 120 Manuel utilisateur

LONGER

LONGER LK5Pro Manuel utilisateur

Stratasys

Stratasys J850 Manuel utilisateur

MakerBot

MakerBot Replicator Manuel utilisateur

Stratasys

Stratasys FDM Vantage Series Manuel utilisateur

ZYYX

ZYYX Pro II Manuel utilisateur

FLASHFORGE 3D PRINTER

FLASHFORGE 3D PRINTER Creator Guide de l'utilisateur

LONGER

LONGER LK4 Pro Manuel utilisateur