Cotek S Series Manuel utilisateur

PURE SINE WAVE

POWER INVERTER

S Series User’s Manual

S150/300/500

Table of Contents

1. Safety Instructions ....................................................... 1

1-1. General Safety Precautions............................................ 1

1-2. Precautions When Working with Batteries ...................... 1

2. Functional Characteristics Introduction .................... 2

2-1. Features......................................................................... 2

2-2. Mechanical Drawing....................................................... 2

2-3. S150 Specification ......................................................... 3

2-4. S300 Specification ......................................................... 4

2-5. S500 Specification ......................................................... 5

3. Instructions................................................................... 6

3-1. Front Panel Introduction ................................................. 6

3-2. Rear Panel Introduction.................................................. 8

3-3. AC Safety Grounding ..................................................... 9

3-4. Making DC Wiring Connections...................................... 9

3-5. Installation.....................................................................10

4. Troubleshooting ......................................................... 11

5. Maintenance ............................................................... 12

6. Warranty...................................................................... 12

1. Safety Instructions

WARNING!

Before installing and using the inverter, please read the

following safety information carefully.

1-1. General Safety Precautions

1-1-1. Do not expose the inverter to water, mist, snow, or dust. To

reduce the risk of hazard, do not cover or obstruct the

ventilation shaft.

To avoid overheating, do not install the inverter in a

zero-clearance compartment.

1-1-2. To avoid the risk of fire and electronic shock, make sure that

existing wiring is in good electrical condition and not undersized.

Do not operate the inverter with damaged or substandard

wiring.

1-1-3. There are some components in the inverter that can cause arcs

and sparks.

To prevent from fire or explosion, do not put batteries,

flammable materials, or anything that should be

ignition–protected around the inverter.

1-2. Precautions When Working with Batteries

1-2-1. If battery acid contacts your skin or clothing, you need to wash it

out immediately with soap and water. If acid enters into your

eyes, immediately flush your eyes with running cold water for at

least 20 minutes and get medical attention immediately.

1-2-2. Never smoke or make a spark or flame in the vicinity of batteries

or engines.

1-2-3. Do not drop metal tools on the battery. The resulting spark or

short-circuit on the battery or other electrical parts may cause an

explosion.

1-2-4. Remove personal metal items such as rings, bracelets,

necklaces, and watches when working with a lead-acid battery. A

lead-acid battery may produce a short-circuit current whose

temperature is high enough to weld these metal items and cause

a severe burn.

2. Functional Characteristics Introduction

2-1. Features

zLow Frequency transformer design is capable of driving high reactive

and capacitive loads

zPower ON / OFF remote control (Green Terminal)

zInput & output fully isolation

zThermal control fan

zInput protection烉Reverse Polarity (Fuse) / Under Voltage / Over

Voltage

zOutput protection烉Short Circuit / Overload / Over Temperature

2-2. Mechanical Drawing

S150/300drawing S500drawing

Model

A (mm)

B (mm)

C (mm)

D (mm)

E (mm)

S150

188

41.5

105.0

132

S300

215

41.5

132.0

154

S500

314

42.5

196.0

192

2-3. S150 Specification

Specification

Model No.

Item

S150-112

S150-124

S150-212

S150-224

AC Voltage

100 / 110 / 120 VAC ± 5%

220 / 230 / 240 VAC ± 3%

Rated Power

150W

Surge Power

200W

Waveform

Pure Sine Wave (THD < 6.0%)

Frequency

50 / 60Hz ± 0.5%

Power Factor Allowed

cosθ-90° ~ cosθ+90°

Standard Receptacles

GFCI / NEMA

Schuko / Australia / UK /

Universal / IEC

No Load Current Draw

0.20A

0.16A

0.22A

0.16A

DC Voltage

12V

24V

12V

24V

Input Voltage Range

10.5~15.0

VDC

21.0~30.0

VDC

10.5~15.0

VDC

21.0~30.0

VDC

Efficiency (Typ.)

87%

88%

87%

88%

Protection

Overload, Short Circuit, Reverse Polarity (Fuse),

Over / Under Input Voltage, Over Temperature.

Remote Control

Yes, On/Off controlled by external switch

Working Temperature

0 ~ 40 ɗ

Storage Temp. &

Humidity

-30 ~ 70ɗ, 10~95% RH

Safety Standards

Certified UL 458

(Only for “GFCI”receptacles)

Certified EN 60950-1

Isolation Resistance

I/P –O/P: 100M Ohms / 500VDC

EMI Conduction &

Radiation Certified FCC class B

Certified EN 55022;

EN 61000-3-2, -3-3, -6-3;

EN 61204-3

EMS Immunity ----

Certified EN 61204-3;

EN 61000-6-1;

EN55024; ENV50204;

IEC 61000-4-2, 3, 4, 5, 6, 8, 11

E-mark

----

Certified CISPR25

ISO 11452-2; ISO 7637-2

Fan Cooling

Thermostatically controlled

Dimensions (WxHxD)

132x73x188 mm / 5.20x2.87x7.40 inch

Weight

2.84kg

NOTE烉The specifications are subject to change without notice.

2-4. S300 Specification

Specification

Model No.

Item

S300-112

S300-124

S300-212

S300-224

AC Voltage

100 / 110 / 120 VAC ± 5%

220 / 230 / 240 VAC ± 3%

Rated Power

300W

Surge Power

400W

Waveform

Pure Sine Wave (THD < 6.0%)

Frequency

50 / 60Hz ± 0.5%

Power Factor Allowed

cosθ-90° ~ cosθ+90°

Standard Receptacles

GFCI / NEMA

Schuko / Australia / UK /

Universal / IEC

No Load Current Draw

0.24A

0.28A

0.26A

0.28A

DC Voltage

12V

24V

12V

24V

Input Voltage Range

10.5~15.0

VDC

21.0~30.0

VDC

10.5~15.0

VDC

21.0~30.0

VDC

Efficiency (Typ.)

89%

Protection

Overload, Short Circuit, Reverse Polarity (Fuse),

Over / Under Input Voltage, Over Temperature.

Remote Control

Yes, On/Off controlled by external switch

Working Temperature

0 ~ 40 ɗ

Storage Temp. &

Humidity

-30 ~ 70ɗ, 10~95% RH

Safety Standards

Certified UL 458

(Only for “GFCI”receptacles)

Certified EN 60950-1

Isolation Resistance

I/P –O/P: 100M Ohms / 500VDC

EMI Conduction &

Radiation Certified FCC class B

Certified EN 55022;

EN 61000-3-2, -3-3, -6-3;

EN 61204-3

EMS Immunity ----

Certified EN 61204-3;

EN 61000-6-1;

EN55024; ENV50204;

IEC 61000-4-2, 3, 4, 5, 6, 8, 11

E-mark ----

Certified CISPR25

ISO 11452-2; ISO 7637-2

Fan Cooling

Thermostatically controlled

Dimensions (WxHxD)

154x73x215 mm / 6.06x2.87x8.46 inch

Weight

4.06kg

NOTE烉The specifications are subject to change without notice.

2-5. S500 Specification

Specification

Model No.

Item

S500-112

S500-124

S500-212

S500-224

AC Voltage

100/110/115/120 VAC ± 5%

200/220/230/240 VAC ± 3%

Rated Power

500W

Surge Power

500W~625W(1min) , 625~750W(10s)

Waveform

Pure Sine Wave (THD < 3.0%)

Frequency

50 / 60Hz ± 0.5%

Power Factor Allowed

cosθ-90° ~ cosθ+90°

Standard Receptacles

GFCI / NEMA

Schuko / Australia / UK /

Universal

No Load Current Draw

0.5A

0.4A

0.7A

0.4A

DC Voltage

12V

24V

12V

24V

Input Voltage Range

10.5~16.0

VDC

21.0~32.0

VDC

10.5~16.0

VDC

21.0~32.0

VDC

Efficiency (Typ.)

89%

Protection

Overload, Short Circuit, Reverse Polarity (Fuse),

Over / Under Input Voltage, Over Temperature.

Remote Control

Yes, On/Off controlled by external switch

Working Temperature

-20 ~ 40 ɗ

Storage Temp. &

Humidity

-30 ~ 70ɗ, 10~95% RH

Safety Standards

Certified UL 458

(Only for “GFCI”receptacles)

Certified EN 60950-1

Isolation Resistance

I/P –O/P: 100M Ohms / 500VDC

EMI Conduction &

Radiation Certified FCC class B

Certified EN 55022;

EN 61000-3-2, -3-3, -6-3;

EN 61204-3

EMS Immunity ----

Certified EN 61204-3;

EN 61000-6-1;

EN55024; ENV50204;

IEC 61000-4-2, 3, 4, 5, 6, 8, 11

E-Mark ----

Certified CISPR 25

ISO 11452-2; ISO 7637-2

Fan Cooling

Thermostatically controlled

Dimensions (WxHxD)

192x90x314 mm / 7.56x3.54x12.36 inch

Weight

6.00kg

NOTE烉The specifications are subject to change without notice.

3. Instructions

S150, S300 and S500 series are very reliable, portable, and fully protected.

These pure sine inverters are used in a wide range of applications such as

vehicles, office equipment, home entertainment, electronic appliances, etc.

To have the most effective power inverter performance, it must be installed

and used properly. Please read the instructions of this manual before you

install and operate this model.

3-1. Front Panel Introduction

S150/300 Front Panel S500 Front Panel

Model

S150 / S300 / S500

˕A

AC output socket

˕B

Main switch

˕C

Remote port

˕D

Power status LED

3-1-1. AC output (Outlet Sockets available) ˕A烉

3-1-2. Main switch˕Band remote port˕C烉

The 3-stage switch is for turning the unit ON/OFF or putting in to the

remote mode.

3-1-1-1. Before installing the inverter, make sure the main switch

is set to "OFF ".

3-1-1-2. Before using the remote unit, make sure the main switch

is set to "REMOTE ".

3-1-1-3. Ensure the remote control contact is off.

3-1-1-4. Remote Port烉Place 0.75mm2and Screw type cable

between the remote port and the panel.

3-1-1-5. To turn ON / OFF inverter via remote switch.

REMOTE PORT

MODE I

MODE II

3-1-3. Power Status LED ˕D烉

LED Status

Description

Solid Green

AC Power OK

Fast Red Blink

OVP

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Cotek Onduleur

Cotek

Cotek SR1000 Manuel utilisateur

Cotek

Cotek SK700-112 Manuel utilisateur

Cotek

Cotek S150 Series Manuel utilisateur

Cotek

Cotek S1500-112 Manuel utilisateur

Cotek

Cotek SR-1600 Plus-124 Manuel utilisateur

Cotek

Cotek SK700-112 Manuel utilisateur

Cotek

Cotek SD2500-112 Manuel utilisateur

Cotek

Cotek SK Series Manuel utilisateur

Cotek

Cotek SE350 series Manuel utilisateur

Cotek

Cotek SK120 Series Manuel utilisateur

Cotek

Cotek SR-1600 Plus -148 Manuel utilisateur

Cotek

Cotek S150 Series Manuel utilisateur

Cotek

Cotek SD2500 Manuel utilisateur

Cotek

Cotek SP Series Manuel utilisateur

Cotek

Cotek SE200-124 Manuel utilisateur

Cotek

Cotek S600R Series Manuel utilisateur

Cotek

Cotek S600 Series Manuel utilisateur

Cotek

Cotek SP Series Manuel de référence

Cotek

Cotek ST Series Manuel utilisateur

Cotek

Cotek S1500-112 Manuel utilisateur

Cotek

Cotek SP-700-148 Manuel utilisateur

Cotek

Cotek SK700-112 Manuel utilisateur

Cotek

Cotek S1500-112 Manuel utilisateur

Cotek

Cotek ST Series Manuel utilisateur

Manuels Onduleur populaires d'autres marques

Fourgroup

Fourgroup Easy Manuel utilisateur

Velleman

Velleman PI300M Manuel utilisateur

Sungrow

Sungrow SG350HX-US Manuel utilisateur

WilTec

WilTec 61897 Manuel utilisateur

SMA

SMA SUNNY BOY STORAGE 2.5 Manuel utilisateur

Simplicity

Simplicity LANDLORD 316 Manuel utilisateur

Santak

Santak SMAX 3000 Manuel utilisateur

ATON

ATON RA.Store-3 Manuel utilisateur

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ Manuel utilisateur

Tektronix

Tektronix CFG250 Manuel utilisateur

Champion

Champion 200989 Manuel utilisateur

Vanner

Vanner 20-500 Series Manuel utilisateur

GE GEP Manuel utilisateur

Astrel Group

Astrel Group Power Reducer Guide rapide

MULTIQUIP

MULTIQUIP GDP-5H Mode d’emploi

GoWISE

GoWISE PS1007 Manuel utilisateur

Promate

Promate PM13500D ES Manuel utilisateur

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM Manuel utilisateur