Cornelius ED-250 Manuel utilisateur

ED250 Dispenser/Ice-O-Matic Kit Installation Instructions

INSTALLATION INSTRUCTIONS

FOR ED250 DISPENSER/ICE-O-MATIC MODEL C106 ICE MAKER

WARNING:

Disconnect power to the unit before installing the adaptor following all lockout/tag out procedures established by the

user. Verify that all the power is off to the unit before performing any work.

Failure to comply could result in serious injury, death or damage to the equipment.

WARNING:

All ice baffle plates and bin stats, if included or recommended in this kit, must be installed as directed in this manual or

the equipment manufacturer’s instructions.

Failure to comply could result in serious injury, death or damage to the equipment.

WARNING:

All of the attachment screws and plates must be installed as directed in this manual.

Failure to comply could result in serious injury, death or damage to the equipment.

1. Seal the ice maker to the top of the dispenser as follows (see Figure 1).

A. Locate the outline of the ice maker on the dispenser lid as shown in Figure 1.

B. Run a bead of RTV inside the perimeter of the ice maker outline on the dispenser lid so that the ice

maker sets on the RTV.

C. Set the ice maker onto the lid and position it as shown in Figure 1.

D. Wipe away the excess RTV.

2. Drill 0.136” diameter holes (#29 drill) into the ice maker cabinet and the dispenser lid using the ice maker mount-

ing brackets as templates. Use extreme caution not to drill into any ice maker components (condenser, tubing,

etc.). Secure the brackets using the #10 sheet metal screws, 8 provided.

3. Follow the ice maker manufacturer’s instructions to complete the installation of the ice maker including the bin

thermostat if so equipped or required.

CAUTION:

The bin thermostat location must not interfere with agitator rotation.

4. Secure the manual fill cover in position on the lid over the rear bin access opening with the thumbscrew. Note that

the insulation strip should be compressed against the ice maker cabinet to form a seal with the cover secured in

position.

Table 1. Loose Shipped Parts

Item No. Part No. Name Qty.

1 22127 Bracket, Ice Maker Mounting 2

2 50904 RTV, 3OZ. Tube 1

3 70226 #10 Sheet Metal Screw 8

Release Date: November 5, 2010 www.cornelius.com Revision: B

ED250 Dispenser/Ice-O-Matic Kit Installation Instructions

Figure 1. Dispenser Rear View

Autres manuels pour ED-250

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Cornelius Distributeur de boissons

Cornelius

Cornelius FlavorFusion 255 Manuel utilisateur

Cornelius

Cornelius Tea Tower Manuel utilisateur

Cornelius

Cornelius R-404A REFRIGERANT Manuel utilisateur

Cornelius

Cornelius ED 300 BC Manuel utilisateur

Cornelius

Cornelius UC-20 Guide de configuration

Cornelius

Cornelius 15 Gallon Single-Flavor Visual Display Dispenser... Guide d'installation

Cornelius

Cornelius ED 300 BC Manuel utilisateur

Cornelius

Cornelius CTP-20 Guide de configuration

Cornelius

Cornelius remcor DB275--BCP Manuel utilisateur

Cornelius

Cornelius ENDURO 250 Manuel utilisateur

Cornelius

Cornelius JetSpray JS7C Manuel utilisateur

Cornelius

Cornelius DF 250 BCP Manuel utilisateur

Cornelius

Cornelius ED 250 BCP Manuel utilisateur

Cornelius

Cornelius VIPER E Manuel utilisateur

Cornelius

Cornelius Impulse XL Manuel utilisateur

Cornelius

Cornelius 6 Flavor Mode d’emploi

Cornelius

Cornelius The Profile PR150 BC Manuel utilisateur

Cornelius

Cornelius ED-250 Manuel utilisateur

Cornelius

Cornelius ABS 2.0 Manuel utilisateur

Cornelius

Cornelius VANGUARD 245 Manuel utilisateur

Cornelius

Cornelius Flavorfusion Ice Drink Dispenser with Flavor... Manuel utilisateur

Cornelius

Cornelius Enduro 150 8 Valve Manuel utilisateur

Cornelius

Cornelius Impulse Non-Carbonated Post-Mix Beverage... Manuel utilisateur

Cornelius

Cornelius Enduro 175 8 Valve Manuel utilisateur

Manuels Distributeur de boissons populaires d'autres marques

PEGAS

PEGAS Evolution Manuel utilisateur

Ugolini

Ugolini MT micro Manuel utilisateur

Bunn

Bunn SLCA-7 Instructions d'installation

Gekkeikan

Gekkeikan Sake Machine Manuel utilisateur

Olympia

Olympia DH709 Manuel utilisateur

Marco

Marco ECOSMART PB10 Manuel utilisateur

Marvel

Marvel ML24BN Series Manuel

Cecilware

Cecilware 2K-GB-LD Manuel

Sure Vend

Sure Vend 673 Manuel utilisateur

Nostalgia Electrics

Nostalgia Electrics KEG7000SS Manuel utilisateur

Bunn

Bunn LCR-3 HV Guide de dépannage

Servend

Servend SV-200 Manuel utilisateur

EdgeStar

EdgeStar VBR440 Manuel utilisateur

CDS AUTOMATEN

CDS AUTOMATEN ML-16C2-C Manuel utilisateur

Siemens

Siemens GA 3000 Manuel d'instructions et de sécurité

Selbach

Selbach Fruit Juice dispenser Manuel utilisateur

Taylor

Taylor C302NP Manuel utilisateur

Vinotemp

Vinotemp VT-WINEDISP2 Manuel utilisateur