Compaq SSL2000 Series Manuel utilisateur

Compaq Confidential – Need to Know Required

Writer: Bob Young Project: Compaq StorageWorks SSL2000 Series Library Drive Upgrade Reference Guide Comments:

Part Number: 187194-001 File Name: a-frnt.doc Last Saved On: 4/6/00 7:10 PM

SSL2000 Series Library

Drive Upgrade

Reference Guide

First Edition (April 2000)

Part Number 187194-001

Compaq Computer Corporation

Compaq Confidential – Need to Know Required

Writer: Bob Young Project: Compaq StorageWorks SSL2000 Series Library Drive Upgrade Reference Guide Comments:

Part Number: 187194-001 File Name: a-frnt.doc Last Saved On: 4/6/00 7:10 PM

Notice

Compaq, the Compaq logo, and StorageWorks Registered in U. S. Patent and Trademark Office.

All other product names mentioned herein may be trademarks or registered trademarks of their

respective companies.

Compaq shall not be liable for technical or editorial errors or omissions contained herein. The

information in this document is subject to change without notice.

The information in this publication is subject to change without notice and is provided “AS IS”

WITHOUT WARRANTY OF ANY KIND. THE ENTIRE RISK ARISING OUT OF THE USE OF

THIS INFORMATION REMAINS WITH RECIPIENT. IN NO EVENT SHALL COMPAQ BE

LIABLE FOR ANY DIRECT, CONSEQUENTIAL, INCIDENTAL, SPECIAL, PUNITIVE OR

OTHER DAMAGES WHATSOEVER (INCLUDING WITHOUT LIMITATION, DAMAGES FOR

LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION OR LOSS OF BUSINESS

INFORMATION), EVEN IF COMPAQ HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH

DAMAGES. THE FOREGOING SHALL APPLY REGARDLESS OF THE NEGLIGENCE OR

OTHER FAULT OF EITHER PARTY AND REGARDLESS OF WHETHER SUCH LIABILITY

SOUNDS IN CONTRACT, NEGLIGENCE, TORT, OR ANY OTHER THEORY OF LEGAL

LIABILITY, AND NOTWITHSTANDING ANY FAILURE OF ESSENTIAL PURPOSE OF ANY

LIMITED REMEDY.

The limited warranties for Compaq products are exclusively set forth in the documentation

accompanying such products. Nothing herein should be construed as constituting a further or additional

warranty.

Printed in the U.S.A.

Compaq StorageWorks SSL2000 Series Library Drive Upgrade Reference Guide

First Edition (April 2000)

Part Number 187194-001

Compaq Confidential – Need to Know Required

Writer: Bob Young Project: Compaq StorageWorks SSL2000 Series Library Drive Upgrade Reference Guide Comments:

Part Number: 187194-001 File Name: a-frnt.doc Last Saved On: 4/6/00 7:10 PM

Contents

About This Guide

Symbols in Text...........................................................................................................v

Symbols on Equipment...............................................................................................vi

Cabinet Stability ........................................................................................................vii

Getting Help ..............................................................................................................vii

Compaq Technical Support ................................................................................vii

Compaq Website .............................................................................................. viii

Compaq Authorized Reseller............................................................................ viii

Adding a Second Drive

Introduction .................................................................................................................1

Removing the Outside Cover.......................................................................................2

Outside Cover Screw Locations ...........................................................................2

Outside Cover Removal Procedures.....................................................................3

Removing the Brace Plate and Upper Drive Mounting Plate ......................................4

Installing Alignment Pins ............................................................................................6

Installing the New Drive..............................................................................................7

List of Figures

Figure 1. Outside cover screw locations (tabletop version)........................................2

Figure 2. Outside cover screw locations (rackmount version)....................................3

Figure 3. Brace plate removal.....................................................................................4

Figure 4. Upper drive mounting plate removal...........................................................5

Figure 5. Alignment pin installation ...........................................................................6

Figure 6. Installing the new drive ...............................................................................7

Figure 7. Connecting the new drive............................................................................8

Compaq Confidential – Need to Know Required

Writer: Bob Young Project: Compaq StorageWorks SSL2000 Series Library Drive Upgrade Reference Guide Comments:

Part Number: 187194-001 File Name: a-frnt.doc Last Saved On: 4/6/00 7:10 PM

About This Guide

This guide is designed to be used as step-by-step instructions for installing a

second drive into a Compaq StorageWorks SSL2000 Series Library.

Symbols in Text

These symbols may be found in the text of this guide. They have the following

meanings.

WARNING: Text set off in this manner indicates that failure to follow directions

in the warning could result in bodily harm or loss of life.

CAUTION: Text set off in this manner indicates that failure to follow directions

could result in damage to equipment or loss of information.

IMPORTANT: Text set off in this manner presents clarifying information or specific

instructions.

NOTE: Text set off in this manner presents commentary, sidelights, or interesting points

of information.

vi Compaq StorageWorks SSL2000 Series Library Drive Upgrade Reference Guide

Compaq Confidential – Need to Know Required

Writer: Bob Young Project: Compaq StorageWorks SSL2000 Series Library Drive Upgrade Reference Guide Comments:

Part Number: 187194-001 File Name: a-frnt.doc Last Saved On: 4/6/00 7:10 PM

Symbols on Equipment

These icons may be located on equipment in areas where hazardous conditions

may exist.

Any surface or area of the equipment marked with these symbols

indicates the presence of electrical shock hazards. Enclosed area

contains no operator serviceable parts.

WARNING: To reduce the risk of injury from electrical shock hazards,

do not open this enclosure.

Any RJ-45 receptacle marked with these symbols indicates a Network

Interface Connection.

WARNING: To reduce the risk of electrical shock, fire, or damage to

the equipment, do not plug telephone or telecommunications

connectors into this receptacle.

Any surface or area of the equipment marked with these symbols

indicates the presence of a hot surface or hot component. If this

surface is contacted, the potential for injury exists.

WARNING: To reduce the risk of injury from a hot component, allow

the surface to cool before touching.

Power Supplies or Systems marked with these symbols

indicate the equipment is supplied by multiple sources of

power.

WARNING: To reduce the risk of injury from electrical shock,

remove all power cords to completely disconnect power from

the system.

Any product or assembly marked with these symbols indicates that

the component exceeds the recommended weight for one individual

to handle safely.

WARNING: To reduce the risk of personal injury or damage to the

equipment, observe local occupational health and safety

requirements and guidelines for manual material handling.

About This Guide vii

Compaq Confidential – Need to Know Required

Writer: Bob Young Project: Compaq StorageWorks SSL2000 Series Library Drive Upgrade Reference Guide Comments:

Part Number: 187194-001 File Name: a-frnt.doc Last Saved On: 4/6/00 7:10 PM

Cabinet Stability

WARNING: To reduce the risk of personal injury or damage to the equipment,

be sure that:

■The leveling jacks are extended to the floor.

■The full weight of the cabinet rests on the leveling jacks.

■The stabilizing feet are attached to the cabinet if it is a single cabinet

installation.

■The cabinets are coupled together in multiple cabinet installations.

■Only one component is extended at a time. A cabinet may become

unstable if more than one component is extended for any reason.

Getting Help

If you have a problem and have exhausted the information in this guide, you

can get further information and other help in the following locations.

Compaq Technical Support

In North America, call the Compaq Technical Phone Support Center at

1-800-OK-COMPAQ. This service is available 24 hours a day, 7 days a week.

For continuous quality improvement, calls may be recorded or monitored.

Outside North America, call the nearest Compaq Technical Support Phone

Center. Telephone numbers for world wide Technical Support Centers are

listed on the Compaq website. Access the Compaq website at

http://www.compaq.com.

Be sure to have the following information available before you call Compaq:

■Technical support registration number (if applicable)

■Product serial number

■Product model name and number

■Applicable error messages

■Add-on boards or hardware

■Third-party hardware or software

■Operating system type and revision level

viii Compaq StorageWorks SSL2000 Series Library Drive Upgrade Reference Guide

Compaq Confidential – Need to Know Required

Writer: Bob Young Project: Compaq StorageWorks SSL2000 Series Library Drive Upgrade Reference Guide Comments:

Part Number: 187194-001 File Name: a-frnt.doc Last Saved On: 4/6/00 7:10 PM

Compaq Website

The Compaq website has information on this product as well as the latest

drivers and Flash ROM images. You can access the Compaq website at

http://www.compaq.com.

Compaq Authorized Reseller

For the name of your nearest Compaq authorized reseller:

■In the United States, call 1-800-345-1518.

■In Canada, call 1-800-263-5868.

■Elsewhere, see the Compaq website for locations and telephone

numbers.

Compaq Confidential – Need to Know Required

Writer: Bob Young Project: Compaq StorageWorks SSL2000 Series Library Drive Upgrade Reference Guide Comments:

Part Number: 187194-001 File Name: b-ch1 Adding a Second Drive.doc Last Saved On: 4/6/00 7:12 PM

Adding a Second Drive

Introduction

This guide explains how to add a second tape drive to the Compaq

StorageWorks SSL2000 Series Library (AIT Library).

IMPORTANT: All screws that do not use lock washers, captive washers, or lock nuts

must have Loctite 222 applied when parts are reassembled in the field. If you ignore this

step, you might cause premature failure of the mechanism.

This chapter includes procedures for:

■Removing the outside cover

■Removing the brace plate and upper drive mounting plate

■Installing alignment pins

■Installing the new drive

2Compaq StorageWorks SSL2000 Series Library Drive Upgrade Reference Guide

Compaq Confidential – Need to Know Required

Writer: Bob Young Project: Compaq StorageWorks SSL2000 Series Library Drive Upgrade Reference Guide Comments:

Part Number: 187194-001 File Name: b-ch1 Adding a Second Drive.doc Last Saved On: 4/6/00 7:12 PM

Removing the Outside Cover

This section describes how to remove the outside cover from both the tabletop

and rackmount versions of the Compaq StorageWorks SSL2000 Series

Library.

Outside Cover Screw Locations

The outside cover for the tabletop version is held in place by four screws at the

sides of the unit (see Figure 1).

cc00018

Figure 1. Outside cover screw locations (tabletop version)

Adding a Second Drive 3

Compaq Confidential – Need to Know Required

Writer: Bob Young Project: Compaq StorageWorks SSL2000 Series Library Drive Upgrade Reference Guide Comments:

Part Number: 187194-001 File Name: b-ch1 Adding a Second Drive.doc Last Saved On: 4/6/00 7:12 PM

The outside cover for the rackmount version is held in place by two screws at

the top-rear of the unit (see Figure 2).

cc0019

Figure 2. Outside cover screw locations (rackmount version)

Outside Cover Removal Procedures

1. Turn off power to the AIT Library and then unplug it from the AC

power source.

2. Remove the appropriate screws that secure the outside cover to the unit.

3. Slide the outside cover toward the rear of the unit until it clears the lip

behind the front panel.

4. Lift the outside cover up and away from the unit.

5. Save the hardware for re-use.

Autres manuels pour SSL2000 Series

Table des matières

Autres manuels Compaq Stockage

Compaq

Compaq 219700-001 - ProLiant - 1500 Manuel utilisateur

Compaq

Compaq StorageWorks ESL9000 Series Manuel utilisateur

Compaq

Compaq 230050-001 - StorageWorks NAS B3000 Model N900... Manuel utilisateur

Compaq

Compaq Storage Works ESL9198 Series Manuel d'installation et d'exploitation

Compaq

Compaq SDLT 110 Manuel utilisateur

Compaq

Compaq 312134-B21 - Intel Pentium II Xeon Processor... Manuel utilisateur

Compaq

Compaq TL891 - DLT Tape Library Manuel utilisateur

Compaq

Compaq SW TL881 DLT Mini-Lib/1 Manuel utilisateur

Compaq

Compaq StorageWorks 4100 - RAID Array Manuel utilisateur

Compaq

Compaq 230039-001 - StorageWorks NAS Executor E7000 Model 904... Manuel

Compaq

Compaq StorageWorks 4000 - RAID Array Guide de référence rapide

Compaq

Compaq StorageWorks TM RAID Array 3000 Pedestal Storage... Manuel d'installation

Compaq

Compaq Hot-Pluggable Wide Ultra2 Manuel utilisateur

Compaq

Compaq ML330 - ProLiant - G3 Manuel utilisateur

Compaq

Compaq SW TL881 DLT Mini-Lib/1 Manuel utilisateur

Compaq

Compaq StorageWorks ESL9000 Series Manuel utilisateur

Compaq

Compaq StorageWorks SDLT Manuel utilisateur

Compaq

Compaq MSL5026 Manuel utilisateur

Compaq

Compaq DAT 320 Mode d’emploi

Compaq

Compaq RA8000/ESA12000 Manuel d'installation et d'exploitation

Compaq

Compaq 230039-001 - StorageWorks NAS Executor E7000 Model 904... Mode d’emploi

Compaq

Compaq 157770-001 - DAT Drive 20/40 Tape Mode d’emploi

Compaq

Compaq 230039-001 - StorageWorks NAS Executor E7000 Model 904... Manuel utilisateur

Compaq

Compaq DLT Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur