Compaq SW TL881 DLT Mini-Lib/1 Manuel utilisateur

TL881 MiniLibrary Drive Upgrade

Procedure

First Edition (May 1999)

Part Number ER-TL881-DA. A01/138248-001

Compaq Computer Corporation

Notice

The information in this publication is subject to change without notice.

COMPAQ COMPUTER CORPORATION SHALL NOT BE LIABLE FOR TECHNICAL OR

EDITORIAL ERRORS OR OMISSIONS CONTAINED HEREIN, NOR FOR INCIDENTAL OR

CONSEQUENTIAL DAMAGES RESULTING FROM THE FURNISHING, PERFORMANCE, OR

USE OF THIS MATERIAL. THIS INFORMATION IS PROVIDED “AS IS” AND COMPAQ

COMPUTER CORPORATION DISCLAIMS ANY WARRANTIES, EXPRESS, IMPLIED OR

STATUTORY AND EXPRESSLY DISCLAIMS THE IMPLIED WARRANTIES OF

MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, GOOD TITLE AND AGAINST

INFRINGEMENT.

This publication contains information protected by copyright. No part of this publication may be

photocopied or reproduced in any form without prior written consent from Compaq Computer

Corporation.

The software described in this guide is furnished under a license agreement or nondisclosure agreement.

The software may be used or copied only in accordance with the terms of the agreement.

Compaq, Deskpro, Fastart, Compaq Insight Manager, Systempro, Systempro/LT, ProLiant, ROMPaq,

QVision, SmartStart, NetFlex, QuickFind, PaqFax, ProSignia, registered United States Patent and

Trademark Office.

Neoserver, Netelligent, Systempro/XL, SoftPaq, QuickBlank, QuickLock are trademarks and/or service

marks of Compaq Computer Corporation.

Microsoft, MS-DOS, Windows, and Windows NT are registered trademarks of Microsoft Corporation.

Pentium is a registered trademark and Xeon is a trademark of Intel Corporation.

Other product names mentioned herein may be trademarks and/or registered trademarks of their

respective companies.

TL881 MiniLibrary Drive Upgrade Procedure

First Edition (May 1999)

Part Number ER-TL881-DA. A01/138248-001

Contents

About This Guide

Text Conventions....................................................................................................v

Symbols in Text.....................................................................................................vi

Symbols on Equipment..........................................................................................vi

Rack Stability.......................................................................................................vii

Getting Help.........................................................................................................vii

Compaq Technical Support ............................................................................vii

Compaq Website...........................................................................................viii

Compaq Authorized Reseller...........................................................................ix

Adding a Second Tape Drive

Parts Location.........................................................................................................1

Overall Procedure...................................................................................................2

Removing and Replacing the Skin Cover (Desktop Models Only).....................3

Removing and Replacing the Cover Plate.........................................................4

Removing and Replacing the Drive Caddy Assembly .......................................5

Installing the Second Tape Drive......................................................................7

Index

iv TL881 MiniLibrary Drive Upgrade Procedure

List of Figures

Figure 1. Parts Location.........................................................................................1

Figure 2. Removing the Skin Cover........................................................................3

Figure 3. Removing the Cover Plate.......................................................................5

Figure 4. Drive Caddy Assembly Parts...................................................................6

List of Tables

Table 1 Parts Location ............................................................................................2

About This Guide

This guide is designed to be used as step-by-step instructions for installation

and as a reference for operation, troubleshooting, and future upgrades.

Text Conventions

This document uses the following conventions to distinguish elements of text:

Keys Keys appear in boldface. A plus sign (+) between

two keys indicates that they should be pressed

simultaneously.

USER INPUT User input appears in a different typeface and in

uppercase.

FILENAMES File names appear in uppercase italics.

Menu Options,

Command Names,

Dialog Box Names

These elements appear in initial capital letters.

COMMANDS,

DIRECTORY NAMES,

and DRIVE NAMES

These elements appear in uppercase.

Type When you are instructed to type information, type

the information without pressing the Enter key.

Enter When you are instructed to enter information, type

the information and then press the Enter key.

vi TL881 MiniLibrary Drive Upgrade Procedure

Symbols in Text

These symbols may be found in the text of this guide. They have the following

meanings.

WARNING: Text set off in thismanner indicatesthat failure to followdirections

in the warning could result in bodilyharmor loss of life.

CAUTION: Text set offin this manner indicates that failure to follow directions

could result indamage toequipment or loss of information.

IMPORTANT: Text set off in this mannerpresents clarifying information or specific

instructions.

NOTE: Text set off in thismanner presents commentary, sidelights,or interestingpoints

of information.

Symbols on Equipment

These icons may be located on equipment in areas where hazardous conditions

may exist.

Any surface or areaof the equipment marked with these symbols

indicates the presence of electrical shockhazards. Enclosed area

contains no operator serviceable parts.

WARNING: To reduce the risk of injury from electrical shockhazards,

do not open this enclosure.

Any RJ-45 receptacle markedwiththese symbols indicatesa Network

Interface Connection.

WARNING: To reduce the risk of electrical shock, fire, ordamage to

the equipment, do notplug telephone or telecommunications

connectors into this receptacle.

Any surface or areaof the equipment marked with these symbols

indicates the presence of a hot surface orhot component. If this

surface is contacted, the potential for injury exists.

WARNING: To reduce the risk of injury from a hot component,allow

the surface to coolbefore touching.

About This Guide vii

Power Supplies or Systems marked with these symbols

indicate theequipment issupplied bymultiple sources of

power.

WARNING: To reduce the risk of injury from electrical shock,

remove all power cords to completely disconnect power from

the system.

Rack Stability

WARNING: To reduce the risk of personal injury or damage to the equipment,

be sure that:

■The leveling jacks are extended to the floor.

■The full weightof the rackrestson the leveling jacks.

■The stabilizing feet are attached to the rackif itis a single rack

installations.

■The racksare coupled together in multiple rack installations.

■A rack may become unstable if more than one component is extended for

any reason.Extend onlyone componentat a time.

Getting Help

If you have a problem and have exhausted the information in this guide, you

can get further information and other help in the following locations.

Compaq Technical Support

You are entitled to free hardware technical telephone support for your product

for as long you own the product. A technical support specialist will help you

diagnose the problem or guide you to the next step in the warranty process.

In North America, call the Compaq Technical Phone Support Center at

1-800-OK-COMPAQ1. This service is available 24 hours a day, 7 days a week.

Outside North America, call the nearest Compaq Technical Support Phone

Center. Telephone numbers for world wide Technical Support Centers are

1For continuous quality improvement, calls may be recorded or monitored.

viii TL881 MiniLibrary Drive Upgrade Procedure

listed on the Compaq website. Access the Compaq website by logging on to

the Internet at http://www.compaq.com.

Be sure to have the following information available before you call Compaq:

■Technical support registration number (if applicable)

■Product serial number (s)

■Product model name(s) and numbers(s)

■Applicable error messages

■Add-on boards or hardware

■Third-party hardware or software

■Operating system type and revision level

■Detailed, specific questions

Compaq Website

The Compaq website has information on this product as well as the latest

drivers and Flash ROM images. You can access the Compaq website by

logging on to the Internet at http://www.compaq.com.

About This Guide ix

Compaq Authorized Reseller

For the name of your nearest Compaq Authorized Reseller:

■In the United States, call 1-800-345-1518.

■In Canada, call 1-800-263-5868.

■Elsewhere, see the Compaq website for locations and telephone

numbers.

Adding a Second Tape Drive

IMPORTANT: All screws that do not use lock washers, captive washers or lock nuts

must

have Loctite 222 applied when parts are reassembled in the field. If you ignore this

step, you might cause premature failure of the mechanism.

Parts Location

Figure 1 shows the location of most of the field replaceable parts. Table 1

describes the parts.

3456

1011

SHR-1201

Figure 1. Parts Location

Autres manuels pour SW TL881 DLT Mini-Lib/1

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Compaq Stockage

Compaq

Compaq BL10e - HP ProLiant - 512 MB RAM Manuel technique

Compaq

Compaq RA8000/ESA12000 Manuel d'installation et d'exploitation

Compaq

Compaq StorageWorks 3000 - RAID Array Mode d’emploi

Compaq

Compaq QUICKSPECS 294162-B21 Instructions d'utilisation

Compaq

Compaq StorageWorks TM RAID Array 3000 Pedestal Storage... Manuel d'installation

Compaq

Compaq StorageWorks ESL9000 Series Manuel utilisateur

Compaq

Compaq StorageWorks ESL9000 Series Manuel utilisateur

Compaq

Compaq DL760 - ProLiant - 1 GB RAM Manuel utilisateur

Compaq

Compaq 157770-001 - DAT Drive 20/40 Tape Mode d’emploi

Compaq

Compaq 157770-001 - DAT Drive 20/40 Tape Mode d’emploi

Compaq

Compaq SSL2000 Series Manuel utilisateur

Compaq

Compaq 230050-001 - StorageWorks NAS B3000 Model N900... Manuel utilisateur

Compaq

Compaq StorageWorks 4000 - RAID Array Guide de référence rapide

Compaq

Compaq StorageWorks 4000 - RAID Array Manuel utilisateur

Compaq

Compaq DLT Manuel utilisateur

Compaq

Compaq 230050-001 - StorageWorks NAS B3000 Model N900... Manuel utilisateur

Compaq

Compaq 312134-B21 - Intel Pentium II Xeon Processor... Manuel utilisateur

Compaq

Compaq ProLiant Storage System U1 Manuel utilisateur

Compaq

Compaq StorageWorks MSL5026DLX Manuel utilisateur

Compaq

Compaq SDLT 110 Instructions d'utilisation

Compaq

Compaq DAT 320 Mode d’emploi

Compaq

Compaq RA8000 Manuel utilisateur

Compaq

Compaq StorageWorks 4000 - RAID Array Guide de référence rapide

Compaq

Compaq ProLiant Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur