Compaq V700 Manuel utilisateur
User’s Guide
Compaq V700 Color Monitor
ttttt
Part Number: 325803-001 - Writer: JDPoteet - Saved by: Alyce Klingler
Saved date: 09/03/99 9:50 AM
File Path: P:\Docs\Monitors\SonHogan\325803u2
Notice
The information in this guide is subject to change without
notice.
COMPAQ COMPUTER CORPORATION SHALL NOT BE
LIABLE FOR TECHNICAL OR EDITORIAL ERRORS OR
OMISSIONS CONTAINED HEREIN; NOR FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE FURNISHING,
PERFORMANCE, OR USE OF THIS MATERIAL.
This guide contains information protected by copyright. No
part of this guide may be photocopied or reproduced in any
form without prior written consent from Compaq Computer
Corporation.
1999 Compaq Computer Corporation.
All rights reserved. Produced in Singapore.
Compaq and Deskpro are registered in the U. S. Patent and
Trademark Office.
Microsoft, MS-DOS, Windows, Windows NT, and other
names of Microsoft products referenced herein are
trademarks or registered trademarks of Microsoft
Corporation.
ENERGY STAR is a U.S. registered mark.
Product names mentioned herein may be trademarks and/or
registered trademarks of their respective companies.
The software described in this guide is furnished under a
license agreement or nondisclosure agreement. The software
may be used or copied only in accordance with the terms of
the agreement.
User’s Guide
Compaq V700 Color Monitor
Second Edition (September 1999)
Part Number 325803-002
CD-ROM Part Number 400034-004
Compaq Computer Corporation
English 1-1
ttttt
Part Number: 325803-002- Writer: Bruce Sullivan- Saved by: Bruce Sullivan
Pages: 13 Words: 2463 Saved date: 09/03/9910:45 AM File Name: SonHogan
English
Product Features
The monitor features include the following:
■ 17-inch CRT with a 16.0-inch (40.6 cm) diagonal viewable image
size
■ On-screen display for screen adjustments in six different
languages: English, Dutch, French, German, Italian, and Spanish
■ Plug and Play capability if supported by your system
■ Tilt control (image rotation) functionality
■ Automatically scans all horizontal frequencies between 30 and85
kHz and vertical frequencies between 50 and 160 Hz
■ Supports VGA, Super VGA, and resolutions up to 1280 × 1024
and 1600 × 1200 modes
■ Energy Saver feature, when activated, results in a power savings
of greater than 90 percent
■ Macintosh-compatible timing with optional connector
■ Compliant with the following regulated specifications:
❏ Swedish MPR II 1990
❏ EPA Energy Star
❏ European Union CE Directives
❏ Swedish TCO 1999
Universal Driver Manager
This monitor may require a graphics driver (and/or .INF file) that is
compatible with your computer’s graphics adapter. The CD-ROM
included with this monitor contains an .INF file (see the section on
Information Files). Compaq has also created a Universal Driver
Manager (UDM) release that supports all graphics adapters found on
Compaq Deskpro and Compaq Workstation products. The UDM eases
graphics driver deployment across Compaq platforms ensuring cross-
compatibility and backward-compatibility. The resulting solution
enables customers to manage and control ongoing software maintenance
costs. The UDM is available on the Compaq Support Software CD for
Compaq Desktop, Portable, and Workstation Products and the Compaq
World Wide Web site (www.compaq.com).
1-2 English
Part Number: 325803-002- Writer: Bruce Sullivan- Saved by: Bruce Sullivan
Pages: 13 Words: 2463 Saved date: 09/03/9910:45 AM File Name:SonHogan
Information Files
The CD-ROM included with this monitor contains two information files
that should be installed onto your computer—an .INF file and an .ICM
file. The .INF file defines monitor resources and provides specifications
used by Microsoft Windows 95 and Windows 98 to install support
software for certain hardware devices. The .INF file ensures monitor
compatibility and optimization with your computer’s graphics adapter.
The .ICM file provides color matching consistency from monitor screen
to printer and is activated from within the graphics programs that have
this feature. To install these files on your computer, insert the Compaq
CD-ROM into your computer's CD drive and select the software from
the menu that displays on your monitor screen. INF file updates are
downloadable by clicking on:
www.compaq.com/products/monitors/index.html
Setting Up the Monitor
To set up the monitor, ensure that the power is turned off to the monitor,
computer system, and other attached devices, then follow these steps:
1. Place the monitor in a convenient, well-ventilated location near
your computer.
2. Connect the monitor signal cable 1to the 15-pin connector on
the rear panel of the computer and tighten the screws.
✎Be sure the signal cable aligns with the 15-pin connector. Do
not force the cable onto the connector or you may damage the
signal cable.
English 1-3
Part Number: 325803-002- Writer: Bruce Sullivan- Saved by: Bruce Sullivan
Saved date: 09/13/99 5:15 PM - File Name: SonHogan.doc
3. Connect the monitor power cord 2to the rear panel of the
monitor, then plug the other end into an electrical outlet that is
easily accessible and close to the monitor.
!WARNING: To reduce the risk of electric shock or damage
to your equipment:
øý Do not disable the power cord grounding plug. The
grounding plug is an important safety feature.
øý Plug the power cord into a grounded (earthed)
electrical outlet that is easily accessible at all times.
øý Disconnect power from the monitor by unplugging
the power cord from the electrical outlet.
øý Do not place anything on power cords or cables.
Arrange them so that no one may accidentally step
on or trip over them. Do not pull on a cord or cable.
When unplugging from the electrical outlet, grasp
the cord by the plug.
1-4 English
Part Number: 325803-002- Writer: Bruce Sullivan- Saved by: Bruce Sullivan
Pages: 13 Words: 2463 Saved date: 09/03/99 10:45 AM File Name:SonHogan
Operating the Monitor
Front Control Panel
Icon Control Function
1
Select Button 1. Launches on-screen display.
2. Selects Function adjustments.
3. Exits menus and on-screen display.
2−Minus Button Selects and adjusts functions.
3+Plus Button Selects and adjusts functions.
4
Power Switch Turns the monitor on and off.
5
Power Saving LED 1. Green indicates monitor is turned on.
2. Amber indicates suspend mode.
3. Amber indicates sleep mode.
✎Setting Contrast and Brightness controls to their maximum
settings may cause the screen to seem out of focus. To correct
this appearance, decrease the Brightness setting.
English 1-5
Part Number: 325803-002- Writer: Bruce Sullivan- Saved by: Bruce Sullivan
Saved date: 09/03/99 10:43 AM - File Name: SonHogan.doc
On-Screen Display Settings
The adjustments for screen settings are located in the on-screen display
(OSD) and can be viewed in one of six available languages. The on-
screen Main Menu displays the following seven functions:
Main Menu Menu Level 2 Menu Level 3
Brightness Displays Adjustment scale.
Contrast Displays Adjustment scale.
Size and Position … Width
Horizontal Position
Height
Vertical Position
Cancel
Save and Return
Displays Adjustment scale
for each selection.
Geometry/Moiré … Pincushion
Tilt (Rotation)
Trapezoid
Parallelogram
Horizontal Moiré
Vertical Moiré
Cancel
Save and Return
Displays Adjustment scale
for each selection.
Color … 9300K
6500K
Cancel
Save and Return
Displays Adjustment scale
for each selection.
Degauss
Language … Deutsch
English
Espanol
Francais
Italiano
Nederlands
Save and Return
Management … Power Saver
Mode Display
Serial Number
ON/OFF
ON/OFF
Displays Serial Number
Factory Reset Confirm Reset
Reset
Cancel
Exit
1-6 English
Part Number: 325803-002- Writer: Bruce Sullivan- Saved by: Bruce Sullivan
Pages: 13 Words: 2463 Saved date: 09/03/99 10:45 AM File Name:SonHogan
✎The degauss selection does not have a menu. When you select
degauss, the monitor corrects color impurities on the screen
without bringing up another menu. Color impurities are usually
caused by moving or rotating the monitor or by external mag-
netic fields. The monitor screen automatically degausses when
the monitor is turned on. After the degauss selection has been
used, there is a 20-minute delay until the degauss circuitry is
restored and the degauss function can be used at full strength
again.
Making Adjustments Using the OSD
To make a selection from the on-screen display:
1. Press the
Select button 1on the monitor front panel to display
the Main Menu on the monitor screen.
Monitor with On-Screen Display
✎The bar on the bottom of the OSD menu shows the current
operating resolution.
2. To make a selection from the Main Menu, press the Minus (−)
button 2located on the monitor front panel to scroll down, or
press the Plus (+) button ➌to reverse or scroll up.
English 1-7
Part Number: 325803-002- Writer: Bruce Sullivan- Saved by: Bruce Sullivan
Saved date: 09/03/99 10:43 AM - File Name: SonHogan.doc
3. Highlight your choice and press the Select button ➊again. For
example, if your selection is Size and Position, press the Minus
button ➋until Size and Position is highlighted, then press the
Select button ➊to choose it.
4. A second level menu displays additional menu items. To make a
selection, press the Minus (−) button ➋to scroll down, or press
the Plus (+) button ➌to reverse or scroll up.
5. Highlight your choice and press the Select button.
6. The third level displays a sizing window to adjust the selected
function. To adjust the sizing window, press the Minus button to
decrease the number of degrees, or press the Plus button to
increase the number of degrees.
7. Press the
Select button after the adjustment is made.
8. To save the new adjustment, select Save and Return and press the
Select button. To cancel an adjustment, select Cancel and press
the Select button.
9. Select
Exit from the Main Menu and press the Select button again
to exit the on-screen display.
1-8 English
Part Number: 325803-002- Writer: Bruce Sullivan- Saved by: Bruce Sullivan
Pages: 13 Words: 2463 Saved date: 09/03/99 10:45 AM File Name:SonHogan
Adjusting Picture Quality
Allow the monitor to warm up for 30 minutes before performing the
following procedures. The picture image stabilizes after a warm-up
period.
Optimizing Contrast
For best results, set your screen to a dark background (such as the DOS
prompt) before adjusting the following settings:
1. Set the brightness and contrast controls to their lowest settings.
2. Increase brightness until the background portions of the screen
are visible, then slowly reduce brightness until the background is
just extinguished.
3. Adjust contrast control to your preference.
Optimizing Focus
The default image size is preset at the factory. The Size and Position
controls in the on-screen display can be used to increase the screen size
beyond the default setting. However, expanding the screen image
beyond the default settings may degrade the focus at the outer edge of
the screen.
To enhance focus, use the lowest brightness level that gives satisfactory
results in your viewing environment.
✎Settings that maximize contrast may not offer optimum focus,
and settings that maximize focus may not offer optimum
contrast.
Table des matières
Autres manuels Compaq Moniteur
Compaq
Compaq CV5500 Manuel utilisateur
Compaq
Compaq Q2009 - Compaq - Widescreen LCD Monitor Comment utiliser
Compaq
Compaq V1100 Manuel utilisateur
Compaq
Compaq S920 Instructions d'utilisation
Compaq
Compaq D-1H Manuel utilisateur
Compaq
Compaq V40 Manuel utilisateur
Compaq
Compaq TFT8030 Manuel utilisateur
Compaq
Compaq W19Q Manuel utilisateur
Compaq
Compaq TFT1720 Manuel utilisateur
Compaq
Compaq CRT Monitor s7500 Manuel utilisateur
Compaq
Compaq TFT5010R Instructions d'utilisation
Compaq
Compaq 7020 Manuel utilisateur
Compaq
Compaq 2025 Manuel utilisateur
Compaq
Compaq MV7540 Manuel utilisateur
Compaq
Compaq TFT 5000R Manuel utilisateur
Compaq
Compaq Compaq P1610 Manuel utilisateur
Compaq
Compaq V55 Manuel utilisateur
Compaq
Compaq TFT500 Manuel utilisateur
Compaq
Compaq V1000 Manuel utilisateur
Compaq
Compaq 1024 Manuel utilisateur
