Compaq 7020 Manuel utilisateur
User’s Guide
Compaq 7020 Flat Panel Monitor
Document Part Number: 254041-003
April 2002
Enhanced for accessibility
© 2002 Compaq Information Technologies Group, L.P.
Compaq, the Compaq logo are trademarks of Compaq Information
Technologies Group, L.P. in the United States and/or other countries.
Microsoft, MS-DOS, Windows, Windows NT are trademarks of Microsoft
Corporation in the United States and/or other countries.
All other product names mentioned herein may be trademarks of their
respective companies.
Compaq shall not be liable for technical or editorial errors or omissions
contained herein. The information in this document is provided “as is”
without warranty of any kind and is subject to change without notice. The
warranties for Compaq products are set forth in the express limited
warranty statements accompanying such products. Nothing herein should
be construed as constituting an additional warranty.
Compaq service tool software, including associated documentation, is the
property of and contains confidential technology of Compaq Computer
Corporation. Service customer is hereby licensed to use the software only
for activities directly relating to the delivery of, and only during the term
of, the applicable services delivered by Compaq or its authorized service
provider. Customer may not modify or reverse engineer, remove, or
transfer the software or make the software or any resultant diagnosis or
system management data available to other parties without Compaq’s or
its authorized service provider’s consent. Upon termination of the
services, customer will, at Compaq’s or its service provider’s option,
destroy or return the software and associated documentation in its
possession.
CAUTION: Text set off in this manner indicates that failure to
follow directions could result in damage to equipment or loss of
information.
WARNING: Text set off in this manner indicates that failure to
follow directions could result in bodily harm or loss of life.
User’s Guide
Third Edition (April 2002)
First Edition (July 2001)
Part Number: 254041-003
1
Installation
Unpacking
Before unpacking the monitor, prepare a suitable workspace for
your monitor and computer. You need a stable and clean surface
near a wall power outlet. Make sure that monitor has enough
space around it for sufficient airflow. Though the monitor uses
very little power, some ventilation is needed to ensure that the
monitor does not become too hot.
After you unpack the monitor box, make sure that the following
items were included in the box:
■ Monitor
■ 1.5M Monitor-to-PC VGA Cable
■ 2M Monitor-to-PC DVI-D Cable (digital models only)
■ 1.5M Stereo Jack Audio Cable (speaker models only)
■ 1.8M Power Cord
■ AC Adapter
■ User’s Guide
If you find that any of these items is missing or appears
damaged, contact your dealer immediately.
Compaq 7020 Flat Panel Monitor User’s Guide 1-1
Installation
Viewing Angle Adjustment
The monitor is designed to allow users to have a comfortable
viewing angle. The viewing angle can be adjusted as follows:
Top (-5°~ +35°) & Left / Right (-45° to +45°).
Figure 1-1
CAUTION: Do not force the monitor over its maximum
viewing angle settings as stated above. Attempting this will
result in damaging the monitor and monitor stand.
1-2 Compaq 7020 Flat Panel Monitor User’s Guide
Installation
Detaching Monitor from Its Stand
1. Remove the rear panel 1from the monitor. (see Fig. 1-2)
2. Remove the rear support panel 2from the swivel base
support column.
3. Unscrew screws
3the swivel base support column 4.
Figure 1-2
Compaq 7020 Flat Panel Monitor User’s Guide 1-3
Installation
Connecting the Display to the Swivel Base
Before connecting the display to the swivel base support column,
please refer to Fig.1-2.
The rear of this display has four integrated 4 mm, 0.7 pitch,
threaded holes, as well as four 5 mm access holes in the plastic
covering as illustrated in Figure 1-3. These specifications meet
the VESA Flat Panel Monitor Physical Mounting Interface
Standard (paragraphs 2.1 and 2.1.3, version 1, dated 13
November 1997).
Figure 1-3
1-4 Compaq 7020 Flat Panel Monitor User’s Guide
Installation
Cable Installation
Please follow these instructions to install the cables.
1. Remove the back panel 1from the rear of the monitor.
(See Fig. 1-4).
2. Remove the rear support panel 2from the swivel base
support column.
3. Place the signal cable, the DC power cable and the audio
cable into their correct respective grooves 3.
Figure 1-4
Compaq 7020 Flat Panel Monitor User’s Guide 1-5
Installation
Connecting the Display to Your Computer
1. Power off your computer.
2. Connect one end of the signal cable to the monitor's VGA
port or DVI port (digital models only). (See Fig. 1-5)
3. Connect the other end of the signal cable to the VGA port
or DVI port on your PC.
4. Make sure both connections are secure.
Figure 1-5
WARNING: This device must be connected to an off-the-shelf
video cable in order to comply with FCC regulations. A ferrite-core
interface cable is included in the monitor package. This device will
not be in compliance with FCC regulations when a non-ferrite-core
video cable is used.
1-6 Compaq 7020 Flat Panel Monitor User’s Guide
Installation
Connecting the AC Power
1. Connect the power cord to the AC adapter. (See Fig. 1-6)
2. Connect the AC adapter's DC output connector to the DC
Power Jack of the monitor.
3. Connect the power cord to an AC power source.
Figure 1-6
WARNING: We recommend to install a "Surge Protector" device
between the AC Adapter and the electrical wall outlet for adding
protection against power surges to prevent the effects of sudden
voltage variations from reaching the monitor. Sudden power
surges may damage your monitor.
Compaq 7020 Flat Panel Monitor User’s Guide 1-7
Installation
Connecting the Audio Cable
The instructions in this section apply only to monitor models
featuring speakers.
1. Connect the audio cable to the " LINE OUT " jack on your
PC's audio card or to the front panel's "AUDIO OUT" jack
of your CD ROM drive. (See Fig. 1-7)
2. Connect the other end of the audio cable to the monitor's "
LINE IN " jack.
Figure 1-7
1-8 Compaq 7020 Flat Panel Monitor User’s Guide
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Compaq Moniteur
Compaq
Compaq 378901-008 - FP 700 - 15" LCD Monitor Instructions d'installation
Compaq
Compaq MV 740 Manuel utilisateur
Compaq
Compaq P1220 Instructions d'utilisation
Compaq
Compaq QVision Graphics System Manuel utilisateur
Compaq
Compaq TFT1720 Manuel utilisateur
Compaq
Compaq TFT500 Manuel utilisateur
Compaq
Compaq Monitor TFT5015s Manuel utilisateur
Compaq
Compaq 151FS - QVision - 15" CRT Display Manuel utilisateur
Compaq
Compaq TFT500 Manuel utilisateur
Compaq
Compaq V40 Manuel utilisateur
Compaq
Compaq WF1907 - Compaq 19" LCD Monitor Comment utiliser
Compaq
Compaq P700 Manuel utilisateur
Compaq
Compaq S920 Manuel utilisateur
Compaq
Compaq COMPAQ Q1859 Manuel utilisateur
Compaq
Compaq 307713-001 - V 75 - 17" CRT Display Manuel utilisateur
Compaq
Compaq P700 Manuel utilisateur
Compaq
Compaq TFT1701 Manuel utilisateur
Compaq
Compaq 8000 - Elite Convertible Minitower PC Manuel utilisateur
Compaq
Compaq Q2022a Manuel utilisateur
Compaq
Compaq FP745A Manuel utilisateur
