CommScope FOSC-OC-3 Manuel utilisateur

3.1 The tray can be removed by hinging the tray in vertical position and

pull it out of the tray tower.

3.2 The tray can be inserted in the tray tower by pushing the tray at

vertical position into the tray tower.

1 Prepare the enclosure according to the appropriate points of

the installation instruction delivered with the enclosure.

2 Insert the splitter tray into the appropriate slot of the tray tower.

When necessary, replace the appropriate tray by the splitter tray.

3 Removing and inserting a tray

4 Continue with the appropriate points of the installation instruction

delivered with the enclosure.

FOSC-OC-3

INSTALLATION INSTRUCTION

US FOSC tray (D size) with integrated splitter

TC-668-IP

Rev A, Feb 2017

www.commscope.com

5.2 At the end of each fiber, a flag can be attached with the

identification of the fiber. The identification is as follows:

Ix.y: I=Incoming fiber of the splitter

x=splitter number

y=splitter port

Ox.y: O=Outgoing fiber of the splitter

x=splitter number

y=splitter port

In case of asymmetrical splitters, the identification of the ports can be

made through the dB value that is written on the back of the flag at the

end of the fiber.

5.3 Select the appropriate fiber to be spliced, cut the identification

flag when available and do all necessary steps till the splice protector is

installed.

Note: Make sure not to lose fiber identification.

The fiber end can be deformed to create a higher Return Loss on the

unused fibers.

Make sure to cut the fiber end (50 mm, 2” or behind the ID flag)

before starting with the splicing steps.

5.4 Proceed with the storage of the splices and the fibers according to

the installation instruction delivered with the enclosure.

Note: Make sure the splice protector has cooled down before storing in

the splice protector modules.

5.1 The above drawing shows the dedicated spaces (in the D tray) where the fibers are to be stored after splicing

5 Identification

Identification can be done by means of

• colored fibers

• colored tubes

• marked tubes

• colored tapes

• flags.

Make sure not to lose ID.

FOSC-OC-3 (D size tray)

FOSC and all trademarks identiﬁed by ® or ™ are registered trademarks or trademarks, respectively, of CommScope, Inc.

This document is for planning purposes only and is not intended to modify or supplement any speciﬁcations or warranties relating to

CommScope products or services.

This product is covered by one ore more U.S. patents or their foreign equivalents. For patents, see:

www.commscope.com/ProductPatent/ProductPatent.aspx.

To ﬁnd out more about CommScope® products, visit us on the

web at www.commscope.com

For technical assistance, customer service, or to report any

missing/damaged parts, visit us at:

http://www.commscope.com/SupportCenter

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels CommScope Câbles et connecteurs

CommScope

CommScope SYSTIMAX VisiPatch CPC5562 Manuel utilisateur

CommScope

CommScope FOSC-400BG Manuel utilisateur

CommScope

CommScope ETHERSEAL 1479563-2 Manuel utilisateur

CommScope

CommScope AMP NETCONNECT MRJ21 1479452-1 Manuel utilisateur

CommScope

CommScope FOSC-450D Manuel utilisateur

CommScope

CommScope FIBER INDEXING TERMINAL Manuel utilisateur

CommScope

CommScope AMP NETCONNECT 553454-1 Manuel utilisateur

CommScope

CommScope OSP-CLPFEC-LG Manuel utilisateur

CommScope

CommScope HELIAX FiberFeed FDH1210-24SE2 Series Feuille d'instructions

CommScope

CommScope NOVUX Manuel utilisateur

CommScope

CommScope FD21206-48SRC Series Feuille d'instructions

CommScope

CommScope FOSC450 C Manuel utilisateur

CommScope

CommScope SYSTIMAX 360 iPatch... Manuel utilisateur

CommScope

CommScope AMP NETCONNECT 1933352 Series Manuel utilisateur

CommScope

CommScope TDUX-35 Manuel utilisateur

CommScope

CommScope HELIAX FiberFeed HFA208 Series Feuille d'instructions

CommScope

CommScope LC Manuel utilisateur

CommScope

CommScope LightCrimp Plus LC Manuel utilisateur

CommScope

CommScope FIST-RSKG-16 Manuel utilisateur

CommScope

CommScope HELIAX FiberFeed HFT1206-24S49 Series Feuille d'instructions

CommScope

CommScope LightCrimp Plus ST Manuel utilisateur

CommScope

CommScope SYSTIMAX 360 iPatch 360-iP-G2-1U-LC-FX Manuel utilisateur

CommScope

CommScope OFDC-A4 SPLICE/PATCH Manuel utilisateur

CommScope

CommScope HELIAX FiberFeed Manuel utilisateur

Manuels Câbles et connecteurs populaires d'autres marques

Philips

Philips SWA6310 Manuel utilisateur

StarTech.com

StarTech.com CRJ4550PK Manuel utilisateur

Nohau

Nohau EMUL-IP2K-PC Manuel utilisateur

Foxun

Foxun SX-SP144E-HD4K2K Manuel utilisateur

Philips

Philips SWA3305W Manuel utilisateur

opticis

opticis Stretch DVIM1-1P0x Manuel utilisateur

Volkswagen

Volkswagen VAS 6558A Manuel utilisateur

NEXIBO

NEXIBO N-13 Manuel utilisateur

CYP

CYP PU-1H3HBTL Manuel utilisateur

Allen-Bradley

Allen-Bradley 1784-u2dhp Manuel utilisateur

Global Caché

Global Caché Flex Link Blaster Manuel utilisateur

Hauppauge

Hauppauge USB-Live2 Manuel utilisateur

Fenix

Fenix MPSV 15 Manuel utilisateur

BEGA

BEGA 71 085 Manuel utilisateur

Tesla

Tesla HPWC Manuel utilisateur

GAMERON

GAMERON LUXURY TV CABLE Manuel utilisateur

molex

molex Milli-Grid Dual row 87568 Series Manuel utilisateur

Burndy

Burndy Continental Industries thermOweld CRE-7 Manuel utilisateur