Commell FE-97G Manuel utilisateur

FE-97G

Full-size PICMG CPU Card

User’s Manual

Edition 1.1

2012/10/22

FE-97G User’s Manual

-1-

reserved. The information in this document is subject to change without prior notice

to make improvements to the products.

This document contains proprietary information and protected by copyright. No part

of this document may be reproduced, copied, or translated in any form or any means

without prior written permission of the manufacturer.

All trademarks and/or registered trademarks contains in this document are property

of their respective owners. Disclaimer

The company shall not be liable for any incidental or consequential damages

resulting from the performance or use of this product.

The company does not issue a warranty of any kind, express or implied, including

without limitation implied warranties of merchantability or fitness for a particular

purpose.

The company has the right to revise the manual or include changes in the

specifications of the product described within it at any time without notice and

without obligation to notify any person of such revision or changes.

Trademark

All trademarks are the property of their respective holders.

Any questions please visit our website at TUhttp://www.commell.com.twUT

FE-97G User’s Manual

-2-

Packing List:

Please check the package content before you starting using the board.

Hardware:

FE-97G Full-size PICMG CPU Card x 1

Cable Kit:

SATA Cable x 2

DVI module with DVI Cable x 1

(FE-97GTXDG & FE-97GTXDG2)

FDD cable x 1

PS/2 Keyboard & Mouse Cable x 1

Audio Port Cable x 1

USB Cable x 2

40-pin ATA100 IDE cable x 1

ATX cable x 1

FE-97G User’s Manual

-3-

COM & Printer cable x 1

(FE-97GTXG & FE-97GTXDG)

Com Cable x 1

(FE-97GTXG2 & FE-97GTXDG2)

Printer cable x 1

(FE-97GTXG2 & FE-97GTXDG2)

HDTV Port Cable x 1 (Optional)

Printed Matters:

Driver CD x 1 (including User’s Manual)

FE-97G User’s Manual

-4-

Index

Chapter 1 <Introduction>................................................................7

1.1 <Product Overview>.............................................................7

1.2 <Product Specification> .......................................................9

1.3 <Mechanical Drawing>......................................................12

1.4 <Block Diagram> ...............................................................13

Chapter 2 <Hardware Setup>....................................................14

2.1 <Connector Location>........................................................14

2.2 <Connector Reference>......................................................15

2.2.1 <Internal Connectors>.....................................................15

2.2.2 <External Connectors>....................................................15

2.3 <Jumper Location & Reference>........................................16

2.4 < Memory Setup >..................................................................17

2.5 <CMOS Setup> ..................................................................18

2.6 <Enhanced IDE & CF Interface>.......................................19

2.7 <Serial ATAInterface> .......................................................20

2.8 <Ethernet Interface>...........................................................21

2.9 <Onboard Display Interface>.............................................22

2.9.1 <Analog VGA Interface>.................................................22

2.9.2 <Digital Display>...........................................................23

2.9.3 <HDTV Interface> .........................................................27

2.9.4 <DVI Interface >............................................................28

2.10 <Integrated Audio Interface>............................................29

2.11 <GPIO Interface> .............................................................31

2.12 <Power and Fan Installation>...........................................32

2.12.1 <Power connectors>......................................................32

2.12.2 <Fan Connectors> ........................................................32

2.12.3 <ATX Power Mode>.....................................................34

2.13 <Switch and Indicator>.....................................................35

FE-97G User’s Manual

-5-

Chapter 3 <System Setup>.........................................................36

3.1 <Audio Configuration> ......................................................36

3.2 <Video Memory Setup> .....................................................37

3.3 <Display Properties Setting>..............................................38

Chapter 4 <BIOS Setup>...............................................................40

Appendix A <I/O Port Pin Assignment>..........................42

A.1 <Serial ATAPort>..............................................................42

A.2 <IrDA Port>.......................................................................42

A.3 <SMBUS Port>..................................................................43

A.4 <Serial Port 2>...................................................................43

A.5 < RS-232, RS-422, RS-485 & IrDA >...............................44

A.6 <Parallel Port>...................................................................45

A.7 <LAN Port>.......................................................................45

A.8 <USB Interface>................................................................45

A.9 <DVI Port>........................................................................46

A.10 <PS/2 Keyboard & Mouse Port>.....................................46

Appendix B <Flash BIOS>...........................................................47

B.1 <Flash Tool> ......................................................................47

B.2 <Flash BIOS Procedure>...................................................47

Appendix C <System Resources>.......................................48

C.1 <Direct Memory Access (DMA)>.....................................48

C.2 <Direct Memory Access (IRQ)> .......................................48

C.3 <Input /Output (IO)>..........................................................49

C.4 <Memory Address Map>...................................................51

Appendix D <Programming GPIO’s>.................................52

Appendix E <Programming Watchdog Timer>........53

Contact Information...........................................................................54

FE-97G User’s Manual

-6-

(This page is left for blank)

FE-97G User’s Manual

-7-

Chapter 1 <Introduction>

1.1 <Product Overview>

FE-97G is the Full-size PICMG 1.0 CPU Card, with Intel® Atom N270 processor for

533 MHz front side bus, Intel® 945GSE and ICH7M chipset, integrated GMA950

graphics, DDR2 SO-DIMM memory, Realtek AC97 Audio, Serial ATA and two Intel®

82574L Gigabit LAN.

Intel Atom Processor

The Intel® Atom N270 single core processor is with 533 MHz front side bus, 512KB

L2 cache. It's built on 45nm process technology support Hyper-Threading

Technology, Enhanced Intel SpeedStep® Technology reduces average system

power consumption.

Mobile Intel® 945GSE chipset

The board integrates Intel® 945GSE and ICH7M chipset. The chipset features

power-efficient graphics with an integrated 32-bit 3D graphics engine based on

Intel® Graphics Media Accelerator 950 architecture with LVDS, CRT, and

TV-Out display ports. It provides I/O capabilities and flexibility via high-bandwidth

interfaces such as PCI, Serial ATA and Hi-Speed USB 2.0 connectivity. It also

includes a single channel for 400/533 MHz DDR2 system memory (SODIMM), HD

Audio with 7.1channels surrounding sound.

All in One multimedia solution

Based on Intel 945GSE and ICH8M chipset, the board provides high performance

onboard graphics, 18-bit Dual channel LVDS interface, HDTV and 2 channels ac97

Audio, to meet the every requirement of the multimedia application

FE-97G User’s Manual

-8-

Flexible Extension Interface

The board provides two PCI Express mini card, one mini-PCI socket and one CF

socket.

FE-97G User’s Manual

-9-

1.2 <Product Specification>

General Specification

Form Factor Full-size PICMG CPU Card

PICMG version 1.0 (Rev. 2.0), PCI version 2.0 compliant

CPU Intel® Atom N270 processor

Package type: FCBGA8

Front side bus: 533MHz

Memory 1 x 200-pin DDR2 SO-DIMM SDRAM up to 2GB

Unbufferred, none-ECC memory supported only

Chipset Intel® 945GSE and ICH7M

BIOS Phoenix-Award v6.00PG 8Mb SPI flash BIOS

Green

Function Power saving mode includes doze, standby and suspend modes.

ACPI version 2.0 and APM version 1.2 compliant

Watchdog

Timer System reset programmable watchdog timer with 1 ~ 255

sec./min. of timeout value

Real Time

Clock Chipset integrated RTC with onboard lithium battery

IDE UltraATA133 IDE interface supports up to 2 ATAPI devices

One 44-pin IDE port onboard

One CompactFlash Type II socket

Serial ATA Intel® ICH7M integrates 2 Serial ATA interfaces

(No RAID Function) Up to 150MB/s of transfer rate

Multi-I/O Port

Chipset Intel® ICH7M with Winbond® W83627DHG-P controller

Serial Port Five RS232 and one jumper selectable RS232/422/485

Parallel Port One internal bi-direction parallel port with SPP/ECP/EPP mode

Floppy Port One internal Floppy port

USB Port 6 x Hi-Speed USB 2.0 ports with 480Mbps of transfer rate

IrDA Port One IrDA compliant Infrared interface supports SIR

K/B & Mouse PS/2 keyboard and mouse port on bracket

GPIO One 12-pin Digital I/O connector with 8-bit programmable

VGA Display Interface

Chipset Intel® 945GSE GMCH (Graphic Memory Controller Hub)

Memory Up to 224MB shared with system memory

Display Type CRT, LCD monitor with analog display, DVI, HDTV

Connector External DB15 female connector

Onboard 40-Pin LVDS connector (FE-97GTXDG/TXDG2)

Onboard 26-Pin DVI connector (FE-97GTXDG/TXDG2)

Onboard 9-Pin TV-out connector

Autres manuels pour FE-97G

Table des matières

Autres manuels Commell Carte mère

Commell

Commell LE-37DJIP Manuel utilisateur

Commell

Commell LV-67M Manuel utilisateur

Commell

Commell LV-67D Manuel utilisateur

Commell

Commell LV-651 series Manuel utilisateur

Commell

Commell LV-682 Manuel utilisateur

Commell

Commell LV670 Series Manuel utilisateur

Commell

Commell FS-977PRO Manuel utilisateur

Commell

Commell LV-66A Manuel utilisateur

Commell

Commell LP-175 Manuel utilisateur

Commell

Commell LV-678 Manuel utilisateur

Commell

Commell LE-37G Manuel utilisateur

Commell

Commell LV-67P Manuel utilisateur

Commell

Commell LP-173 Manuel utilisateur

Commell

Commell LP-174 Manuel utilisateur

Commell

Commell LV-677 Manuel utilisateur

Commell

Commell LP-176 Manuel utilisateur

Commell

Commell LV-668 Manuel utilisateur

Commell

Commell LE-370 Manuel utilisateur

Commell

Commell LS-37L Manuel utilisateur

Commell

Commell LV-67S Manuel utilisateur

Commell

Commell LE-5Q0 series Manuel utilisateur

Commell

Commell ETB-ITX1 Manuel utilisateur

Commell

Commell AS-C76 Manuel utilisateur

Commell

Commell LS-573 Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manuel utilisateur