Colortrac SmartLF SC25m Manuel utilisateur

SCIM-002

Colortrac Ltd

Page 1 of 7

Issue 2

SC Instruction Manual

Date: 12/02/14

This is a confidential controlled document and is the property of Colortrac Ltd.

It is not to be copied or reproduced in part or whole.

SC Scanners Scanner Service Manual

Page 2 of 7

SC Scanners

SC25m, SC25c & SC25e

SC36m, SC36c & SC36e

SC42m, SC42c & SC42e

Instruction Manual

Issue 2

©Colortrac Ltd 2014

The product and the contents of this publication may be changed without prior notification.

Colortrac Ltd makes every effort to ensure this publication is free from error. Misprints, errors

or quality observations should be reported to Technical Support, Colortrac Ltd.

Colortrac Ltd shall not be liable for any damages, errors, issues or events that result from the

use of the equipment or this manual.

No part of this product or publication may be reproduced,

copied or transmitted in any form or by any means without

permission from:

Colortrac Ltd.

Units 3 –5 Brunel Court.

Burrel Road.

St Ives,

Huntingdon,

Cambridgeshire,

PE27 3LW.

United Kingdom.

Tel: +44 (0)1480 464618

Fax: +44 (0)1480 464620

www.colortrac.com

SC Scanners Scanner Service Manual

Page 3 of 7

1.1 SingleSensor Glass Sub-Assy

1.1.1 Safety Precautions

Ensure that the power and USB cables are completely disconnected from the scanner unit.

Ensure the scanner is positioned on a stable maintenance platform.

1.1.2 Tools

Medium Flat Screwdriver

Soft Cloth

1.1.3 Associated Part Numbers

10H014 : SingleSensor Glass Sub-Assy

1.1.4 Procedure

1. To Remove, Open the Error!

Reference source not

found. and using a Medium

Flat Screwdriver and a clean

cloth, insert the screwdriver

into the recess at the left end.

2. Gentle lever back the

screwdriver to prise the

SingleSensor Glass Sub-

Assy away from the Error!

Reference source not

found..

SC Scanners Scanner Service Manual

Page 4 of 7

3. Continue to gently pull the

whole SingleSensor Glass

Sub-Assy away from the

Error! Reference source

not found..

4. Remove the SingleSensor

Glass Sub-Assy

5. When refitting the

SingleSensor Glass Sub-

Assy, make sure the right

end is against the End Plate.

6. Position the SingleSensor

Glass Sub-Assy over the

Error! Reference source

not found. and make sure it

is central all the way along.

NOTE: Before fitting the SingleSensor Glass

Sub-Assy, clean both sides with a lint free

cloth to remove any dust, dirt or fingerprints.

SC Scanners Scanner Service Manual

Page 5 of 7

7. Press firmly all along the

SingleSensor Glass Sub-

Assy until all the latches are

locked in place.

8. Close the Error! Reference

source not found..

9. Reconnect the Power and USB cables to the Scanner and power up the scanner and

Utilities Program.

10. Run the

1.2 Calibration

11. , see below.

12. Re-cycle the scanner and software.

SC Scanners Scanner Service Manual

Page 6 of 7

1.3 Calibration

1.3.1 Associated Part Numbers

10H028 :

1.4 Calibration

and Error! Reference source not found. Target

1. Open the Error! Reference

source not found. and

clean the SingleSensor

Glass Sub-Assy with a soft

cloth. Close the Lid

Assembley.

2. Insert the Calibration Target

so that the black part

section is inserted first, face

up.

NOTE: It is necessary to remove the

Magnetic Paper Guide so the target can fit

centrally in scanner.

3. Double click the SmartLF

SC Utilities icon.

4. On the front page, click the

‘Calibrate’ button.

SC Scanners Scanner Service Manual

Page 7 of 7

5. Click ‘OK’ to except the

message.

6. After approx. 4 minutes, the

‘Calibration’ (or

Normalisation) is complete.

During calibration , the

target will move through the

scanner in stages several

times.

Autres manuels pour SmartLF SC25m

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Colortrac Scanner

Colortrac

Colortrac SmartLF Ci 40E Instructions d'installation

Colortrac

Colortrac SmartLF Ci 40 Manuel utilisateur

Colortrac

Colortrac L24e Manuel utilisateur

Colortrac

Colortrac SC Series Manuel utilisateur

Colortrac

Colortrac T25 Manuel utilisateur

Colortrac

Colortrac SmartLF SG Manuel utilisateur

Colortrac

Colortrac SmartLFGx+ 28 Instructions d'installation

Colortrac

Colortrac M25e Manuel utilisateur

Colortrac

Colortrac SMARTLF SCAN Manuel utilisateur

Colortrac

Colortrac SmartLF Cx Series Manuel utilisateur

Colortrac

Colortrac SmartLF Ci24m Manuel utilisateur

Colortrac

Colortrac SmartLF Cx 40C Manuel utilisateur

Colortrac

Colortrac SmartLF Ci 40 Manuel utilisateur

Colortrac

Colortrac SmartLF SG Series Manuel utilisateur

Colortrac

Colortrac SmartLF Scan! 24 Manuel utilisateur

Colortrac

Colortrac SmartLF 4080E Manuel

Colortrac

Colortrac SmartLF Cx 40M Manuel utilisateur

Colortrac

Colortrac T Series Manuel utilisateur

Colortrac

Colortrac SMARTLF SCAN Manuel utilisateur

Colortrac

Colortrac SmartLF SGi 36 Manuel utilisateur

Colortrac

Colortrac SmartLF Gx 54 Manuel

Colortrac

Colortrac SmartLF Ci24m Manuel utilisateur

Colortrac

Colortrac 5480e Manuel utilisateur

Colortrac

Colortrac SmartLF Ci C24 MFP Manuel utilisateur

Manuels Scanner populaires d'autres marques

Plustek

Plustek Scanner Manuel utilisateur

Z/I Imaging

Z/I Imaging PhotoScan 2001 Manuel utilisateur

Renkforce

Renkforce DS100-5M Manuel utilisateur

Image Access

Image Access WideTEK A2 Manuel utilisateur

Canon

Canon imageFORMULA CR-120N Manuel utilisateur

Fujitsu

Fujitsu FI-4860C2 Manuel utilisateur

GeoSlam

GeoSlam ZEB Horizon Instructions d'installation

Kodak

Kodak i5800 Scanner Manuel utilisateur

Kodak

Kodak i7300 Manuel utilisateur

Revopoint

Revopoint POP Manuel utilisateur

Fujitsu

Fujitsu fi-4860C Manuel utilisateur

Eddyfi Technologies

Eddyfi Technologies Floormap X Manuel utilisateur

Faselase

Faselase F6 Manuel utilisateur

Fujitsu

Fujitsu CardMinder Manuel utilisateur

Uniden

Uniden BC340CRS Manuel utilisateur

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Manuel utilisateur

Mustek

Mustek PageExpress 4800 Pro Manuel utilisateur

Optex

Optex 750830 Manuel utilisateur