Code Alarm CA 1550 Manuel utilisateur

2Way

LCD

Vehicle Security

and

Keyless

Entry

System

IMPORTANT NOTE: The operation of the Security and Convenience System as described

this manual

applicable to mostvehicles. However, due to the configuration of some vehicles, some functions AND/OR

SAFETY PRECAUTIONS

may

not apply. Please see your installing dealer for more information.

Table of Contents

Using Your Remote Control 3

Arming

the

Security

System

Passive

Arming

Bypass

Bypassing

the

Shock

Sensor 3

Hidden

Alarm

Function

Disarming

the

Security

System

Two

Stage

Door

Unlock

(optional) 4

Valet

Mode 4

Manually

Overriding

the

Security

System

Activating

Trunk

Release (optional) 4

Activating

Optional

AUX 1(optional) 4

Using

the

Progressive Car

Finder

Feature 5

Using

the

Personal

Protection

Alarm

Eliminating

Arm

Disarm

Notification

Chirps

Car

Jack

Mode 5

LED and Siren/Horn Indications 6

Additional 2-Way LCD Remote Control Functions 7

LCD Remote Control ICON's 9

Transmitter Button Functions

Replacing Remote Control Batteries

Warranty Information

2009 Audiovox Electronics Corporation.

All

rights reserved.

Using Your Remote Control

Arming the Security System

arm

the system, exit the vehicle, close all doors, then press the

(1J

button. The

parking lights will flash 2times, indicating the system

armed, has locked the

doors (if equipped and connected) and activated the starter disable feature.

The

LED

status indicator will blink steadily, once per second.

NOTE: The system is defaulted with Silent Choice enabled, which requires a

second press of the

[IJ

button

activate

audible arming response from the

vehicle.

Passive Arming Bypass

If passive arming

enabled

your system, while the system

disarmed, press

~»)),

the system will respond with 1chirp and the LED will turn

on.

The

security system will remain

this temporally bypassed state for as long as

you

wish.

exit passive bypass, press the 8or

button and the system will return

to normal status.

Bypassing

The

Shock Sensor

arm the system and ignore the shock sensor press

l2J

button, then within 5

seconds press

&:l

~»))

,the system will respond with 1long chirp.

NOTE: The system will only change the shock sensor setting for one arm cycle

and

will

defaulted back

normal operation the next time the system

armed.

Hidden Alarm Function

Press the

~»))

button first, within 3seconds press the

[IJ

button to activate the

hidden alarm function. The security system will arm with "Hidden Alarm Function"

which the siren /horn will

silenced if the system

triggered.

Disarming the Security System

disarm the system press the

button. The parking lights will flash 1time,

indicating the system is disarmed and has unlocked the doors (if equipped and

connected).

NOTE: The system is defaulted with Silent Choice enabled, which requires a

second press of the

(if

button to activate

audible arming response from the

vehicle.

·Throughoutthis manual, 'press' refers to pressing for less than 1second; 'press and hold' refers

pressing for more

than 2seconds.

Two Stage

Door

Unlock

(Optional)

this feature

enabled

your system, pressing the

,'(!

button one time will

unlock only the driver's door. Press.? again within three seconds to unlock the

remaining doors.

Valet

Mode

engage

valet

mode:

Turn the ignition key to the

position.

Press and hold the emergency override button.

The LED will light solid indicating that the system

valet mode.

When valet mode

activated the status LED will light solid, and all security

functions will

disabled.

disengage

valet

Mode:

Turn the ignition key to the

position.

Press and release the emergency override button.

The LED will turn off indicating that the system has exited valet mode.

Manually

Overriding

the

Security

System

Your system can

disarmed without the use of the transmitter. This

necessary, since you will need

the

ability to operate your vehicle

the transmitter

lost or its battery fails.

by-pass the alarm system;

Open the vehicle door. The alarm will sound.

Turn the ignition key to the

position.

Within 5seconds, press and release the valet push button switch.

The alarm system will stop sounding and enter the (by-passed) mode.

You

can

now start and operate the vehicle normally.

Activating

the

Trunk

Release

Feature

(Optional)

this feature

enabled

your system, pressing and holding the

button for 3

seconds will open the vehicle's trunk or hatch.

Activating

Optional

AUX

(Optional)

this feature

enabled

your system, pressing the

':2

and

,'51

buttons

simultaneously will activate

optional feature. This feature can

programmed

for awide range of functions like power window or sunroof automation, please

consult your installing dealer to determine the functionality of your system.

Using the

Progressive

Car

Finder

Feature

Press the

cj»)

button to locate your vehicle. The system will sound 5times at low

volume, increasing

volume each time the button

pressed.

Using

the

Personal

Protection

Alarm

(Panic)

Press and hold the

cj»))

button for 3seconds to activate the personal protection

alarm. During panic mode, the normal function of the transmitter buttons will be

suspended. The transmitter's @and

ci1

buttons can

used to lock and unlock the

door (if the option

installed).

stop the alarm, press and hold the

cj»)

button

the transmitter again for 3seconds. The system will automatically stop after 30

seconds.

Eliminating

Arm

Disarm

Notification

Chirps

System ARM/DISARM chirps can be toggled ON or OFF without entering the

programming feature banks.

Turn the ignition ON then OFF.

Press and release the valet/programming button 3times. The system will

respond with 1chirp for ON or 2chirps for OFF.

Car

Jack

Mode

This feature must be turned on

system programming, please consult your

installing dealer.

Triggering Car Jack mode: While the ignition is ON and press and hold @+

riJ

for 2

seconds, the parking lights will flash 1time and the system will act as follows;

50 seconds after being triggered the siren will chirp for 15 seconds,

during this 15 seconds you will be alerted to push the valet button to turn

off Car Jack mode. If Car Jack mode is not turned off at this time it will

advance to the next step.

Following the 15 second chirps (total time now 65 seconds) the siren

will go into full sound and the parking lights will start flashing.

90 seconds after trigger in, addition to the siren and parking lights, the

system will activate the starter kill. THE SYSTEM WILL REMAIN

THIS

STATE

UNTILTHE BATIERY

DEPLETED.

OVERRIDETHE SYSTEM TO TURN OFF CAR JACK MODE: Turn the ignition OFF

then ON and press the valet button within 10 seconds.

LED

and

Siren/Horn Indications

LED Display Indications

LED

OFF

SLOW

FLASH

FAST FLASH

(SOLID)

2FLASH PAUSE

3FLASH PAUSE

4FLASH PAUSE

5FLASH PAUSE

Siren/Horn Indications

Chirps

Function

DISARMED

ARMED

PASSIVEARMING

VALET MODE

ZONE 2TRIGGER, HOODffRUNK

ZONE 3TRIGGER, DOOR

ZONE 4TRIGGER, SHOCK

ZONE 5TRIGGER, IGNITION

Function

DISARM

ARM

DOORAJAR UPONARMING

DISARM/TRIGGERED

CAR LOCATOR

Parking

Light

Flash Indications

Flashes

Function

1DISARM

2ARM

3DISARM/TRIGGERED

5CAR LOCATOR

Additional2-Way LCD Remote Control Functions

Check Vehicle Status

Press and release

2times then press

'if

within 3seconds, the transmitter will

respond with one melody sound and display the current status of the vehicle.

Display Illumination

Press and hold the ,; button for 1second. The display will illuminate for 5

seconds.

Melody /Vibration Mode

have the remote control vibrate,

playa

melody tone or both each time it receives

aresponse from the vehicle press and release [f then press and hold

for 2

seconds.

Button Beeps

toggle button beeps on or off press and release

then press and hold 0for 2

seconds.

Battery Save Mode

While

POWER SAVE MODE the 2-way LCD transmitter will NOT look for any

incoming signals from the main unit until abutton is pressed. The LCD screen will

display SAVE to indicate that power save mode

ON.

enter power save mode

press and hold

for 5seconds.

Clear Flashing Icons

and

Melody Sound

Press the

button 3times within 3seconds. This will clear the melody sound and

flashing icons on the LCD screen.

Stopping LCD Trigger Melody

stop the alarm trigger melody if the system has been triggered WITHOUT

disarming the system, press any button one time only, this will not send a

command to the vehicle at this time and the alarm will continue to sound.

Button Lock

Press and release then press hold the for 2seconds

toggle the button lock

or off.

Illumination

Press and release

2times then press and hold for 2seconds

toggle

illumination

or off. When

on,

the display will illuminate when

receives or

sends acommand.

2Car Mode

control asecond security system enter 2car mode

pressing

then press

and it together for 3seconds. When the

Llli

icon appears

the transmitter's LCD

screen it will control the second security system. Use the same method to exit 2

car mode and resume control of the original vehicle's security system.

NOTE: Asecond security system must

installed and the LCD transmitter must

learned

it before this feature will operate the additional system.

Parking Meter Countdown

The parking meter countdown timer has 6preset times, to access the preset times

and begin countdown press and release [f then press and hold

c:1»))

for 2seconds,

repeating this step to increase the countdown time.

Adjusting the Clock and Timer Settings

The clock, alarm clock and programmable countdown timer are accessed through

the Function Menu. Press and hold

for 3seconds to access the function menu,

once you have accessed the feature menu press and release [f to scroll through

each feature and follow the steps below to adjust the settings for each. Press and

hold

for 2seconds

exit the menu.

Clock Hour

Clock Minute

Alarm Clock Hour

Alarm Clock Minute

Alarm Clock

/OFF

Countdown Timer Hour

Countdown Timer Minute

Countdown Timer

/OFF

Press

c:1»))

to increase or nto decrease

Press

c:1»))

to increase or nto decrease

Press

c:1»))

to increase or nto decrease

Press

c:1»))

to increase or nto decrease

Press

c:1»))

to turn

or nto turn OFF

Press

c:1»))

to increase or nto decrease

Press

c:1»))

to increase or nto decrease

Press

c:1»))

to turn

or nto turn OFF

LCD Remote Control ICON's

LOCK

UNLOCK

£[%[MJ

SYSTEM ARMED

VALET MODE

~«21»~

TRANSMITTING

€::=>

IGNITION ON/TRIGGER

~@IM

TRUNK TRIGGER

DOOR TRIGGER

HOOD TRIGGER

?f~

FULL SHOCK TRIGGER

I}{]OO~

@G~

SYSTEM TRIGGER XTIME COUNT DOWN

~IDDD:

BATTERY INDICATOR

~~~~

BATTERY SAVE MODE

VIBRATE/SILENT MODE tMELODY MODE

rill

2CAR MODE

:8B:BB

TIME DISPLAY

ALARM CLOCK

Transmitter Button Functions

1Way

Lock

Unlock Car Find I

Trunk

Operation Method

Transmitter

Panic

Lock

XPress and Release

Unlock

XPress

and

Release

2Step

Unlock

XPress and Release 2times

Trunk

XPush

and

Hold

Sec)

Car Finder XPress and Release

Panic XPush

and

Hold

Sec)

AUX1

X X Push and Hold

sec)

Shock Bypass XXPress

and

Release Lock then

Press Lock +Car Find

Hidden

Alarm

X X Press and Release Car Fnd then

Press Lock

Passive

Arming

XXPress and Release

Bypass

2Way

Lock

Unlock Car Find I

Trunk

Function

Operation Method

Transmitter

Panic

Lock

XPress and Release

Unlock

XPress and Release

2Step

Unlock

XPress and Release 2times

Trunk XPush

and

Hold

Sec)

Car

Finder

XPress and Release

Panic XPush

and

Hold

Sec)

AUX1

X X Push and Hold (3 Sec)

Shock

Bypass XXPress and Release Lock then

Press Lock +Car Find

Hidden Alarm X X Press and Release Car Fnd then

Press Lock

Passive Arming XXPress and Release

Bypass

Menu XPress and Release

2009 Audiovox Electronics Corporation. All rights reselVed.

Autres manuels pour CA 1550

Table des matières

Autres manuels Code Alarm Alarme de voiture

Code Alarm

Code Alarm PROFESSIONAL CA 1045 Manuel utilisateur

Code Alarm

Code Alarm 2000 Manuel utilisateur

Code Alarm

Code Alarm CA 170 Manuel utilisateur

Code Alarm

Code Alarm PROFESSIONAL SERIES Manuel utilisateur

Code Alarm

Code Alarm CA 1150 Manuel utilisateur

Code Alarm

Code Alarm CA 420A Manuel utilisateur

Code Alarm

Code Alarm PowerCode PC 7300 Manuel utilisateur

Code Alarm

Code Alarm CA-120 Manuel utilisateur

Code Alarm

Code Alarm CA 421 Manuel utilisateur

Code Alarm

Code Alarm CA-330 Manuel utilisateur

Code Alarm

Code Alarm CATX520 Mode d'emploi

Code Alarm

Code Alarm CA 6151 Manuel utilisateur

Code Alarm

Code Alarm CA611 Manuel utilisateur

Code Alarm

Code Alarm ca1555 Manuel utilisateur

Code Alarm

Code Alarm Ca 1053 Manuel utilisateur

Code Alarm

Code Alarm CA100 Manuel utilisateur

Code Alarm

Code Alarm CA 610 Manuel utilisateur

Code Alarm

Code Alarm CATX120 Mode d'emploi

Code Alarm

Code Alarm ca6554 Manuel utilisateur

Code Alarm

Code Alarm CA-230 Manuel utilisateur

Code Alarm

Code Alarm CA-670 Manuel utilisateur

Code Alarm

Code Alarm Professional caSECRS Manuel utilisateur

Code Alarm

Code Alarm 420A Manuel utilisateur

Code Alarm

Code Alarm CATX630 Mode d'emploi

Manuels Alarme de voiture populaires d'autres marques

Clifford

Clifford 3606X Manuel utilisateur

Ultra Start

Ultra Start 2500M SERIES Manuel utilisateur

Ultra Start

Ultra Start 650 Series Manuel utilisateur

Audiovox

Audiovox Prestige Platinum+ APS-511C Manuel utilisateur

Sparkrite

Sparkrite SRA8 Manuel utilisateur

Viper

Viper 4708V Manuel utilisateur

Federal Signal Corporation

Federal Signal Corporation Pathfinder Siren Series Manuel

Falcon

Falcon Predator XL3 Guide de l'utilisateur

Audiovox

Audiovox Auto Security XR91 Mode d'emploi

Clifford

Clifford Sabre II Manuel utilisateur

CrimeStopper

CrimeStopper CS-8717 Guide de démarrage rapide

Ultra Start

Ultra Start 450 SERIES Manuel utilisateur

Scytek electronic

Scytek electronic Vectra X3 Manuel utilisateur

Excalibur

Excalibur AL-1860-EDPB Manuel utilisateur

Clifford

Clifford CYBER 2 Manuel utilisateur

Gemini

Gemini 7057 Manuel utilisateur

FlashLogic

FlashLogic FLRSBA PRESTIGE Manuel utilisateur

Magicar

Magicar FAI-440 Manuel utilisateur