Code Alarm CaSEC Manuel d'installation et d'exploitation

PROFESSIONAL

SERIES

caSEC

2 Way Security and Keyless Entry

Installation and Reference Guide

2caSEC revB

Before You Begin.........................................................................................3

Wire Connection Guide............................................................................... 4

5 Pin Main Harness ................................................................................... 6

9 Pin Input / Output Harness ..................................................................... 7

4 Pin AUX Output Harness........................................................................ 9

3 Pin Door Lock Output Harness............................................................. 11

Additional Ports.........................................................................................15

Antenna / LED / Programming Port........................................................ 15

DBI Port...................................................................................................15

FLCART Cartridge Port ........................................................................... 15

FLCART 4 Pin Programming Port ........................................................... 15

FLCART Harness Port............................................................................. 15

Set Up & Programming ............................................................................. 16

Transmitter Programming........................................................................ 16

Manual Feature Programming................................................................. 16

Programming Feature Banks .................................................................. 17

PC Based Feature Programming / Firmware Updates - (Optional)......... 20

Adjusting the Shock Sensor .................................................................... 21

Testing the Shock Sensor........................................................................ 21

Chirp Delete - User Accessible................................................................ 21

User Selectable LED ............................................................................... 21

Dome Light Delay / Theater Dimming ..................................................... 22

Feature Descriptions................................................................................. 23

Transmitter Button Functions .................................................................. 29

Security Trigger Zones.............................................................................. 31

System Layout...........................................................................................32

Table of Contents

Before You Begin

Thank you for trusting Code Alarm products! If you are a consumer, please note:

Professional installation is strongly recommended.

This manual assumes the installer has adequate knowledge of the following

expertise, and as such, it does not cover these topics in detail:

12-volt electronics

Testing and verifying circuits

Making safe and lasting wiring connections

Factory ignition, power, lighting, data bus and sensing systems

Factory systems and components to avoid

Safe wire routing, circuit protection and product placement

  Accesstovehicle-specictechnicalinformation

In addition, this manual assumes the installer has the proper tools, skill and

facilities to perform a professional installation.

Performing an improper installation could void your vehicle warranty and/or

result in damage to the vehicle or its components, improper system function,

unsafe vehicle operation or physical injury.

If you are an authorized Code Alarm installation technician, please use this

manual as a more detailed addendum to the Installation Quick Reference Guide

that accompanies the Code Alarm system. You can download a printable PDF of the

quick reference guide at voxxuniversity.com.

Technical Support (800) 421-3209

or go to

www.voxxuniversity.com

4caSEC revB

DBI PORT

CASEC

# 4360713

FLCART PROGRAMMING PORT

FLCART PORT

FLCART HARNESS PORT

WHITE/RED PARKING LIGHT INPUT

WHITE PARKING LIGHT OUTPUT

BLACK GROUND

BROWN SIREN OUTPUT ( + )

RED BATTERY 12V ( + )

SHOCK SENSOR PORT

BLUE/WHITE INSTANT TRIGGER INPUT ( - )

GREEN DOOR TRIGGER INPUT ( - )

ORANGE GROUND WHEN ARMED ( - )

PURPLE DOOR TRIGGER INPUT ( + )

YELLOW IGNITION INPUT ( + )

RED/WHITE TRUNK RELEASE OUTPUT ( - )

BROWN/BLACK HORN OUTPUT ( - )

VIOLET/BLACK AUX 1 ( - )

LT GREEN/BLACK FACTORY DISARM OUTPUT ( - )

BLUE UNLOCK OUTPUT ( - )

OPEN

GREEN LOCK OUTPUT ( - )

PINK/BLACK AUX 5 OUTPUT ( - )

ORANGE/BLACK AUX 4 OUTPUT ( - )

GRAY/BLACK AUX 3 OUTPUT ( - )

WHITE/BLACK AUX 2 OUTPUT ( - )

#1032368

#1031421

#4120184

#1031423

RED

BATTERY 12V ( + )

BLACK

GROUND WHEN ARMED ( - )

BLUE FULL TRIGGER ( - )

GREEN WARN AWAY TRIGGER ( - )

SHOCK SENSOR & HARNESS

#4700023

ORANGE 86 - ARMED OUTPUT ( - )

RED 85 - IGNITION ( + )

BLACK 87A - STARTER OUTPUT - MOTOR SIDE

WHITE / BLACK 30 - STARTER INPUT - KEY SIDE

OPEN 87 - OPEN

STARTER INTERUPT RELAY & HARNESS

86 85

87a

#1024405

Programming Note:

The default wire function settings are listed next

to the wire color. Wires shown with can be

programmed to perform different functions.

Refer to the Feature Programming section to

change the default setting.

Replacement Part

Notification Harness

(4-Pin)

Replacement Part

Input / Output

Harness

(9-Pin)

Aux Output

Harness

(4-Pin)

Replacement Part

ANTENNA

LED

VALET

** RF KITS SOLD SEPERATELY **

Replacement Parts

1-Way # 4180065

2-Way # 4180064

Harness (4-Pin)

# 4120388

ANTENNA PORT

Replacement Part

Door Lock Harness

(3-Pin)

Wire Connection Guide

System Layout

This diagram shows the available harnesses and connections for the caSEC. Note that

you may not use all connections and modules in your installation.

3 Pin Lock Output Harness

9 Pin Input / Output Harness

5 Pin Main Harness

4 Pin AUX Output Harness

1WHITE/REDPARKING LIGHT INPUT

2WHITE PARKING LIGHT OUTPUT

3BLACKGROUND

4BROWNSIREN OUTPUT ( + )

5REDBATTE RY 12V ( + )

5 PIN MAIN

1BLUE/WHITE INSTANT TRIGGER INPUT ( - )

2GREEN DOOR TRIGGER INPUT ( - )

3ORANGE GROUND WHEN ARMED OUTPUT ( - )

4PURPLE DOOR TRIGGER INPUT ( + )

5YELLOWIGNITION INPUT ( + )

6RED/WHITETRUNK RELEASE OUTPUT ( - )

7BROWN/BLACKHORN OUTPUT ( - )

8VIOLET/BLACK AUX 1 ( - )

9LT GREEN/BLACK FACTORY DISARM OUTPUT ( - )

9 PIN INPUT / OUTPUT

1PINK/BLACK AUX 5 OUTPUT ( - )

2ORANGE/BLACK AUX 4 OUTPUT ( - )

3GRAY/BLACKAUX 3 OUTPUT ( - )

4WHITE/BLACKAUX 2 OUTPUT ( - )

4 PIN AUX

OUTPUT

1BLUE UNLOCK ( - )

2OPEN

3GREEN LOCK ( - )

3 PIN

LOCK

6caSEC revB

3 BLACK GROUND

Connect the BLACK wire to a solid chassis ground point using a ring terminal and

self tapping screw (not supplied). Scrape away paint from the grounding point to

ensure a good connection. The recommended grounding point is a metal surface in

the driver’s side kick panel area.

NOTE: Do not ground the BLACK wire with any other vehicle components.

5 Pin Main Harness

1 WHITE/RED PARKING LIGHT INPUT

2 WHITE PARKING LIGHT OUTPUT

Locate the parking light output wire at the vehicle’s light switch.

  Verication: This wire registers positive voltage when the parking lights are

turned on.

Positive switching Parking Lights:

Connect the WHITE/RED wire to a 15 Amp max fused battery source.

Connect the WHITE wire to the parking light output wire.

Negative switching Parking Lights:

Connect the WHITE/RED wire to a good chassis ground.

Connect the WHITE wire to the parking light output wire.

4 BROWN SIREN OUTPUT ( + )

Locate a suitable mounting location in the engine compartment for the siren, away

from moving parts.

With the bell of the siren aiming downwards, secure the siren in place using self

tapping screws, being careful not do drill into any hoses, wiring or components.

Connect the BLACK siren wire to a chassis ground using a ring terminal and self

tapping screw (not supplied).

 RoutetheBROWNsirenoutputwirefromthecontrolmodulethroughtherewalland

connect to the RED wire on the siren.

NOTE: Be sure to loom the siren wires, and seal the grommet.

3 ORANGE GROUND WHEN ARMED OUTPUT ( - )

This wire will have a continuous ( - ) 500mA output when the system is Armed. This

wire is typically used for controlling window modules or additional sensors.

 Thisoutputiscongurableinoptionprogramming.

5 RED BATTERY 12V ( + )

Locate 1 of the vehicle’s constant 12 Volt battery wires at the ignition switch.

 Verication:This wire will register ( + ) voltage in all positions of the ignition

switch.

Connect the RED wire to the constant 12 Volt battery wire.

NOTE: Remove all fuses until all connections are made.

9 Pin Input / Output Harness

1 BLUE/WHITE INSTANT TRIGGER INPUT ( - )

This wire is a GROUND input for an external sensor or secondary pin switch.

 Verication:This wire when connected will trigger the security system.

2 GREEN DOOR TRIGGER INPUT ( - )

Locate the vehicle’s dome light or door pin switch wire.

 Verication:This wire will register ground (NEG) when the door is opened

and the interior light is on. This wire will register positive voltage when the

door is closed and the interior light is off.

Connect the GREEN wire to the vehicle’s negative door input wire(s).

NOTE: Certain vehicles may require multiple connections. Refer to vehicle

application guide

8caSEC revB

6 RED/WHITE TRUNK RELEASE OUTPUT ( - )

Locate the vehicle’s trunk release wire at the trunk release switch.

 Verication:This wire will register either positive voltage or ground when

the trunk release is activated.

 Thiswirewillsupplya(-)200mAoutputandcanbeconguredinoption

programming.

4 PURPLE DOOR TRIGGER INPUT ( + )

Locate the vehicle’s dome light or door pin switch wire.

 Verication:This wire will register positive voltage (POS) when the door is

opened and the interior light is on. This wire will

off.

Connect the PURPLE wire to the vehicle’s positive door input wire(s).

NOTE: Certain vehicles may require multiple connections. Refer to vehicle

application guide

5 YELLOW IGNITION INPUT ( + )

Locate the vehicle’s ignition wire at the ignition switch.

   Verication:This wire registers voltage when the key is turned to the ON (or

RUN) position. The voltage does not drop out when the key is turned to the

START (or CRANK) position.

Connect the YELLOW wire to the vehicle’s Ignition wire.

7 BROWN/BLACK HORN OUTPUT ( - )

Locate the vehicle’s horn wire.

 Verication:This wire will register at positive voltage and register

ground when the horn switch is pressed.

Connect the BROWN/BLACK wire to the vehicle’s horn wire. This is a low current

output, 200mA.

8 VIOLET/BLACK AUX 1

This wire provides a ( - ) 200mA output capable of driving relays. For Control of

optional accessories (i.e. Power Window/Sunroof, etc.).

 Toactivaterefertothetransmitterbuttoncongurationchart.Pleaserefertothe

selectable options for timing.

9 LT GREEN/BLACK FACTORY DISARM OUTPUT ( - )

This wire will supply a ( - ) 200mA pulse upon disarming the system. Locate the

factory perimeter alarm disarm wire from the key cylinder inside the drivers door.

  Verication: This wire registers ground if the key is turned to the unlock

position in the driver’s door cylinder.

Connect the LT GREEN/BLACK wire to the factory alarm disarm wire.

4 Pin AUX Output Harness

1 PINK/BLACK AUX 5

This wire provides a ( - ) 200mA output capable of driving relays. For Control of

optional accessories (i.e. Power Window/Sunroof, etc.).

 Toactivaterefertothetransmitterbuttoncongurationchart.Pleaserefertothe

selectable options for timing.

2 ORANGE/BLACK AUX 4

This wire provides a ( - ) 200mA output capable of driving relays. For Control of

optional accessories (i.e. Power Window/Sunroof, etc.).

 Toactivaterefertothetransmitterbuttoncongurationchart.Pleaserefertothe

selectable options for timing.

10 caSEC revB

3 GRAY/BLACK AUX 3

This wire provides a ( - ) 200mA output capable of driving relays. For Control of

optional accessories (i.e. Power Window/Sunroof, etc.).

 Toactivaterefertothetransmitterbuttoncongurationchart.Pleaserefertothe

selectable options for timing.

4 WHITE/BLACK AUX 2

This wire provides a ( - ) 200mA output capable of driving relays. For Control of

optional accessories (i.e. Power Window/Sunroof, etc.).

 Toactivaterefertothetransmitterbuttoncongurationchart.Pleaserefertothe

selectable options for timing.

Table des matières

Autres manuels Code Alarm Alarme de voiture

Code Alarm

Code Alarm CA-640 Manuel utilisateur

Code Alarm

Code Alarm CA 170 Manuel utilisateur

Code Alarm

Code Alarm CSI-300 Manuel utilisateur

Code Alarm

Code Alarm CA-150 Manuel utilisateur

Code Alarm

Code Alarm CA 610 Manuel utilisateur

Code Alarm

Code Alarm CA 680 Manuel utilisateur

Code Alarm

Code Alarm CA 521 Manuel utilisateur

Code Alarm

Code Alarm SRT 1600 Manuel utilisateur

Code Alarm

Code Alarm CA-130 Manuel utilisateur

Code Alarm

Code Alarm PROFESSIONAL SERIES Manuel utilisateur

Code Alarm

Code Alarm CATX510 Mode d'emploi

Code Alarm

Code Alarm CA 6151 Manuel utilisateur

Code Alarm

Code Alarm CA 180 Manuel utilisateur

Code Alarm

Code Alarm CA- 550 Manuel utilisateur

Code Alarm

Code Alarm PROFESSIONAL CA 1045 Manuel utilisateur

Code Alarm

Code Alarm TW-1 Manuel utilisateur

Code Alarm

Code Alarm CA100 Manuel utilisateur

Code Alarm

Code Alarm CA 1550 Manuel utilisateur

Code Alarm

Code Alarm Professional Series CA 1050 Manuel utilisateur

Code Alarm

Code Alarm ca 1151 Manuel utilisateur

Code Alarm

Code Alarm Professional ca6153 Manuel utilisateur

Code Alarm

Code Alarm ca1554 Manuel utilisateur

Code Alarm

Code Alarm CA 420 Manuel utilisateur

Code Alarm

Code Alarm Car Alarm Manuel utilisateur

Manuels Alarme de voiture populaires d'autres marques

Clifford

Clifford 3606X Manuel utilisateur

Ultra Start

Ultra Start 2500M SERIES Manuel utilisateur

Ultra Start

Ultra Start 650 Series Manuel utilisateur

Audiovox

Audiovox Prestige Platinum+ APS-511C Manuel utilisateur

Sparkrite

Sparkrite SRA8 Manuel utilisateur

Viper

Viper 4708V Manuel utilisateur

Federal Signal Corporation

Federal Signal Corporation Pathfinder Siren Series Manuel

Falcon

Falcon Predator XL3 Guide de l'utilisateur

Audiovox

Audiovox Auto Security XR91 Mode d'emploi

Clifford

Clifford Sabre II Manuel utilisateur

CrimeStopper

CrimeStopper CS-8717 Guide de démarrage rapide

Ultra Start

Ultra Start 450 SERIES Manuel utilisateur

Scytek electronic

Scytek electronic Vectra X3 Manuel utilisateur

Excalibur

Excalibur AL-1860-EDPB Manuel utilisateur

Clifford

Clifford CYBER 2 Manuel utilisateur

Gemini

Gemini 7057 Manuel utilisateur

FlashLogic

FlashLogic FLRSBA PRESTIGE Manuel utilisateur

Magicar

Magicar FAI-440 Manuel utilisateur

Code Alarm caSEC Manuel d'installation et d'exploitation

Manuels Alarme de voiture populaires d'autres marques