Clearfield Clearview Black Manuel utilisateur
Clearview Black Cassette
Installation Manual ______________________________________________________
Manual 019390 Rev A - Dec 2017
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]
2
Clearview Black Cassette
Installation Manual _________________________________________________________
Manual 019390 Rev A - Dec 2017
Table of Contents
Application 3
Description 3
Technical Specications 3
Congurations 4
Splicing in the Clearview Black Cassette 5
Connector Cleaning Procedure 14
Standard Warranty 17
Proprietary Notice 18
Technical Support 18
3
Clearview Black Cassette
__________________________________________________________ Installation Manual
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]
Manual 019390 Rev A - Dec 2017
Clearview Black incorporates the same exibility and scalability of both the Clearview Classic and Clearview Blue in a 50%
smaller footprint than the Clearview Blue. Decreasing the overall footprint of the ber management element reduces real
estate costs and improves density without compromising critical design elements of access, bend-radius protection, physical
ber protection and route-path diversity.
Clearview Black is a three component tool-less system made up of a top cover, base/splice tray and splice tray cover. Parts
snap together to support the desired application requirements. All types of ber cable construction can be integrated within
the cassette to support all patch and splice, patch only, plug-and-play, and passive optical component hardware scenarios.
Each patch and splice cassette comes prepared for mass fusion splicing, with one meter of ribbonized 250 μm ber
preloaded and prepped to splice. Each ribbonizing jig aligns and secures the loose tube bers into correct color code order,
allowing ribbonizing to be completed quickly and easily.
For patch only congurations, the pre-terminated length of OSP or IFC cable is pre-loaded within the Clearview Black
Cassette. The cassettes are then preloaded into the FieldSmart® product when shipped.
Technical Specications
Clearview Black provides 12 to 24 ports of connectivity for patch
and splice, patch only and plug-and-play (MPO/MTP) congurations
in any network environment. It scales and multiplies to meet your
specic port density and application needs. Additionally, optical
components integrate into the cassette, supporting any input/output
combination of splitting or WDM strategy desired.
Description
Application
Clearview Black Cassette
Dimension 0.81’ H x 6.13” W x 4.14” D
Ratings Terminations are designed and tested to Telcordia GR-326; Cleareld® FiberDeep®
Guarantee: 0.2 dB insertion loss or less, exceeding industry standards
Backwards Compatible N/A
Material Polycarbonate
Connector Types Supports industry standard SC and LC singlemode connectors
Meters/Feet of Slack
Storage 1 meter of 250 μm used for internal ribbon splicing only
Mounting Options Used with FieldSmart® BLG Pivot Bracket
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]
4
Clearview Black Cassette
Installation Manual _________________________________________________________
Manual 019390 Rev A - Dec 2017
Congurations
Patch and Splice: Ribbon
The splice tray that is molded into the
lower tray is all that is needed to deliver
integrated in-cassette splicing applications.
Pre-loaded with up to one meter of ribbon,
250 μm assemblies that are preterminated
with slack stored inside the cassette for
splicing.
Optical Components
Clearview integrates optical components
into the identical cassette, allowing service
providers to mix and match ber modules
with optical components in the same
chassis. Options include circulators, WDM
and splitters up to 1x8 split.
MPO Plug-and-Play
MPO to 12-ber 900 μm assembly allows
for plug-and-play by mating MPO to MPO
with pre-terminated multi-ber OSP or IFC.
Patch Only
Regardless of the industry standard
adapters or cable construction, the
Clearview Black handles all patch only
applications using the lower tray, top cover
and built in radius limiter.
5
Clearview Black Cassette
__________________________________________________________ Installation Manual
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]
Manual 019390 Rev A - Dec 2017
Splicing in the Clearview Black Cassette
Exit positions as seen from the top of the Clearview
Black Cassette.
Left ExitRight Exit
Lift the locking tab to unlatch and remove the bottom
cassette cover. Remove the strain-relief boot from the
cassette.
Left Exit Right Exit
Exit positions as seen from the bottom of the Clearview
Black Cassette.
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]
6
Clearview Black Cassette
Installation Manual _________________________________________________________
Manual 019390 Rev A - Dec 2017
Route the ribbon through the splice sleeve holder and trim
any excess to the left. This will ensure that the ribbon lays
well when the splice sleeve is inserted into the holder.
Loop a cable tie or a length of wax string through the
cassette on the desired exit side.
Gently remove the ribbon from the splice tray.
7
Clearview Black Cassette
__________________________________________________________ Installation Manual
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]
Manual 019390 Rev A - Dec 2017
Load the splice sleeve onto the end of the fanout ribbon.
Load the strain relief boot onto the cable being
spliced. Open up the buffer tube 36” back from the
end and expose the 250 micron bers.
Wrap a piece of grommet tape ¼” from the end of the
jacket and cut the excess.
Loose Tube
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]
8
Clearview Black Cassette
Installation Manual _________________________________________________________
Manual 019390 Rev A - Dec 2017
If splicing loose tube, ribbonize the bers. Proceed to
splicing the fanout to the cable.
Note: If utilizing the Clearview Ribbonizing Tool, reference
the Clearview Ribbonizing Tool Demonstration Video at
www.seecleareld.com under the Resources tab.
Viewable here: https://vimeo.com/212654098
Ribbon
If splicing ribbon into the cassette, slide the strain relief
boot over the end of the ribbon and push it back over 36”.
Note: Cleareld recommends the use of furcation tubing
to protect the bare ribbon before it enters the cassette.
Furcation tubing is secured in the cassette in the same
way as a buffer tube.
Slide the ribbon tie-down over the end of the ribbon and
push it back 36”.
9
Clearview Black Cassette
__________________________________________________________ Installation Manual
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]
Manual 019390 Rev A - Dec 2017
After splicing, begin routing the ribbon counterclockwise
into the splice tray. Rotate the cassette as you load the
ribbon since the cable will have to remain stationary.
Secure the ribbon tie-down in place by heating it in the
splicer oven. Proceed to splicing the fanout to the cable.
Before you load the spliced portion into the splice tray,
route the ribbon under the rst tab below the transition as
shown.
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]
10
Clearview Black Cassette
Installation Manual _________________________________________________________
Manual 019390 Rev A - Dec 2017
Insert the spliced portion into the splice sleeve holder
as shown.
Note: Do not force the splice sleeve into holder. If
necessary, slide the sleeve in from either side as
shown.
Route the remainder of the ber under the tabs
underneath the splice sleeve as shown.
Table des matières
Autres manuels Clearfield Unité de contrôle
Manuels Unité de contrôle populaires d'autres marques
Festo
Festo Compact Performance CP-FB6-E Manuel de la liste des pièces
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur
JS Automation
JS Automation MPC3034A Manuel utilisateur
JAUDT
JAUDT SW GII 6406 Series Guide rapide
Spektrum
Spektrum Air Module System Manuel utilisateur
BOC Edwards
BOC Edwards Q Series Manuel utilisateur
