Cisco 7811 Manuel utilisateur

Wall Mounts

•Wall Mount Kits, on page 1

•Non-Lockable Wall Mount Components for 7811, on page 2

•Non-Lockable Wall Mount Components, on page 9

•Non-Lockable Wall Mount Components for 7861, on page 17

•Adjust the Handset Rest, on page 25

Wall Mount Kits

Each wall mount is unique to your phone model and cannot be used for another phone. If you are planning

to attach your phone to a wall, purchase the wall mount kit specific to your phone.

For part numbers and other additional information, refer to the phone model data sheet. The Cisco IP Phone

8800 Series data sheets can be found here https://www.cisco.com/c/en/us/products/collaboration-endpoints/

unified-ip-phone-8800-series/datasheet-listing.html. The Cisco IP Phone 7800 Series data sheets can be found

here https://www.cisco.com/c/en/us/products/collaboration-endpoints/unified-ip-phone-7800-series/

datasheet-listing.html.

To check which phone model you have, press Applications and select Phone information. The Model

number field shows your phone model.

Table 1: Wall Mount Kits

NotesCisco Wall Mount KitCisco IP Phone

Spare Wallmount Kit for Cisco IP Phone 7811

(CP-7811-WMK=)

Cisco IP Phone 7811

Spare Wallmount Kit for Cisco IP Phone 7800 Series

(CP-7800-WMK=)

Cisco IP Phone 7821 and 7841

Spare Wallmount Kit for Cisco IP Phone 7861

(CP-7861-WMK=)

Cisco IP Phone 7861

Wall Mounts

Non-Lockable Wall Mount Components for 7811

The following figure shows the components of the Cisco IP Phone 7811 Wall Mount Kit.

Figure 1: Wall Mount Kit Components for 7811

The package includes these items:

• One phone bracket

• One wall bracket

• Four M4 x 25-mm Phillips-head screws with four anchors

• Two M3 x 7-mm Self-tapping screws

• One 200-mm Ethernet cable

This section describes how to install and remove the ADA nonlockable wall mount kit.

Figure 2: Back View of ADA Non-Lockable Wall Mount Kit Installed on Phone

Wall Mounts

Non-Lockable Wall Mount Components for 7811

Figure 3: Side View of ADA Non-Lockable Wall Mount Kit Installed on Phone

Install the Non-Lockable Wall Mount Kit for 7811

The wall mount kit can be mounted on most surfaces, including concrete, brick, and similar hard surfaces.

To mount the kit on concrete, brick, or similar hard surfaces, you must provide the appropriate screws and

anchors for your wall surface.

Before you begin

You need these tools to install the bracket:

• #1 and #2 Phillips-head screwdrivers

• Level

• Pencil

You must also install an Ethernet jack for the phone in the desired location if an Ethernet jack does not currently

exist. This jack must be wired appropriately for an Ethernet connection. You cannot use a regular phone jack.

Procedure

Step 1 Mount the wall bracket in the desired location. You can install the bracket over an Ethernet jack, or you can

run the Ethernet network cable to a nearby jack.

If the jack is to be placed behind the phone, the Ethernet jack must be flush to the wall or recessed.

Note

a) Hold the bracket on the wall and place it so that the arrow on the back of the bracket points up.

b) Use the level to ensure that the bracket is level and use a pencil to mark the screw holes.

c) Using a #2 Phillips-head screwdriver, carefully center the anchor over the pencil mark and press the anchor

into the wall.

d) Screw the anchor clockwise into the wall until it is seated flush.

e) Use the included screws and a #2 Phillips-head screwdriver to attach the bracket to the wall.

Wall Mounts

Install the Non-Lockable Wall Mount Kit for 7811

Figure 4: Bracket Installation

Step 2 Attach the phone bracket to the IP Phone.

a) Detach the power cord and other attached cords from the base of the phone, except the handset cord (and

headset cord, if there is a headset).

b) Attach the phone bracket by inserting the tabs into the mounting tabs on the back of the phone. The phone

ports should be accessible through the holes in the bracket.

c) Reattach the cords and seat them in the clips that are incorporated into the phone body.

Wall Mounts

Install the Non-Lockable Wall Mount Kit for 7811

Figure 5: Phone Bracket Attachment

Screw holes1

Step 3 Attach the cables to the phone:

a) Attach the Ethernet cable to the 10/100/1000 SW network port and wall jack.

b) (Optional) If you are connecting a network device (such as a computer) to the phone, attach the cable to

the 10/100/1000 Computer (PC access) port.

c) (Optional) If you use an external power supply, plug the power cord into the phone. Dress the cord by

clipping it into the clips that are incorporated into the phone body next to the PC port.

d) (Optional) If the cables terminate inside the wall bracket, connect the cables to the jacks.

Wall Mounts

Install the Non-Lockable Wall Mount Kit for 7811

Figure 6: Cable Attachment

Handset Port4Phone Bracket1

AC Adapter Port5Network Port2

Optional Power Cable6Wall Bracket3

Step 4 Attach the phone to the wall bracket by inserting the tabs on the top of the wall bracket into the slots on the

phone bracket.

For cables that terminate outside of the brackets, use the cable-access openings in the bottom of the bracket

to position the power cord and any other cable that does not terminate in the wall behind the bracket. The

phone and wall bracket openings together form circular openings with room for one cable per opening.

Wall Mounts

Install the Non-Lockable Wall Mount Kit for 7811

Figure 7: Phone to Wall Bracket Attachment

Step 5 Press the phone firmly into the wall bracket and slide the phone down. The tabs in the bracket click into

position.

Step 6 Proceed to Adjust the Handset Rest, on page 25.

Remove the Phone from the Non-Lockable Wall Mount for 7811

The wall mounting plate contains two tabs to lock the plate into the phone bracket. The following figure shows

the location and shape of the tabs.

Wall Mounts

Remove the Phone from the Non-Lockable Wall Mount for 7811

Figure 8: Tab Location

To remove the phone and mounting plate from the wall bracket, you must disengage these tabs.

Before you begin

You require two screwdrivers or metal rods.

Procedure

Step 1 Push the screwdrivers into the left and right holes in the phone mounting plate approximately 1 in. (2.5 cm).

Step 2 Lift the screwdriver handles up to push down on the tabs.

Wall Mounts

Remove the Phone from the Non-Lockable Wall Mount for 7811

Figure 9: Disengage Tabs

Step 3 Press firmly to disengage the tabs and move the phone up at the same time to release the phone from the wall

bracket.

Non-Lockable Wall Mount Components

The following figure shows the components of the Cisco IP Phone 7800 Series Wall Mount Kit.

Figure 10: Wall Mount Kit Components

The package includes these items:

• One phone bracket

• One wall bracket

• Four M8-18 x 1.25-inch Phillips-head screws with four anchors

Wall Mounts

Non-Lockable Wall Mount Components

• Two M2.5 x 6-mm machine screws

• One 6-inch Ethernet cable

This section describes how to install and remove the ADA nonlockable wall mount kit.

Figure 11: Back View of ADA Non-Lockable Wall Mount Kit Installed on Phone

Figure 12: Side View of ADA Non-Lockable Wall Mount Kit Installed on Phone

Wall Mounts

Non-Lockable Wall Mount Components

Autres manuels pour 7811

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Cisco Téléphone IP

Cisco

Cisco Expansion Module 7914 Manuel utilisateur

Cisco

Cisco 8941 Mode d’emploi

Cisco

Cisco SPA92X Manuel utilisateur

Cisco

Cisco 6901 Standard Mode d’emploi

Cisco

Cisco 88 Series Manuel utilisateur

Cisco

Cisco Small Business Pro SPA 509G Manuel utilisateur

Cisco

Cisco 8851 Manuel utilisateur

Cisco

Cisco 3911 Manuel utilisateur

Cisco

Cisco DATAVOX 7941 Manuel utilisateur

Cisco

Cisco MCS 7800 Series Manuel utilisateur

Cisco

Cisco 7962 Manuel utilisateur

Cisco

Cisco 7962 Manuel utilisateur

Cisco

Cisco SPA 303 Series Manuel utilisateur

Cisco

Cisco SPA92X Manuel utilisateur

Cisco

Cisco SPA-500 Series Manuel utilisateur

Cisco

Cisco 7941G - Unified IP Phone VoIP Manuel utilisateur

Cisco

Cisco Cisco 7960 Manuel utilisateur

Cisco

Cisco LINKSYS SPA921 Manuel utilisateur

Cisco

Cisco Razorline 7975 Manuel d'instructions et de sécurité

Cisco

Cisco WIP320 Manuel utilisateur

Cisco

Cisco 7920 - Unified Wireless IP Phone VoIP Instructions originales

Cisco

Cisco 3905 Manuel du propriétaire

Cisco

Cisco 79 SERIES Manuel utilisateur

Cisco

Cisco 8841 Manuel utilisateur

Manuels Téléphone IP populaires d'autres marques

Alcatel

Alcatel 4028 Manuel utilisateur

Polycom

Polycom Polycom VVX 600 Manuel utilisateur

Polycom

Polycom SoundPoint IP 450 Manuel utilisateur

Polycom

Polycom SoundPoint IP 650 Manuel utilisateur

Proximus

Proximus Maestro 3016 IP Manuel utilisateur

Fanvil

Fanvil X4 Manuel utilisateur

Snom

Snom 320 Manuel utilisateur

Yealink

Yealink Yealink SIP-T46G Manuel utilisateur

Avaya

Avaya 4625SW Manuel utilisateur

Yealink

Yealink SIP-T52S Manuel utilisateur

Nortel

Nortel 1140E Manuel utilisateur

Nexotek

Nexotek NT-P500 Manuel utilisateur

Avaya

Avaya Integral 5 R3.0 Manuel utilisateur

GE 28320EE2 - Dect 6.0 InfoLink 2 Manuel utilisateur

Avaya

Avaya 4600 Series Manuel de service

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Manuel utilisateur

Nortel

Nortel i2050 Manuel utilisateur

Fiberme

Fiberme FAP260 Series Manuel utilisateur