Cisco IP/VC 3526 Comment utiliser

Corporate Headquarters:

Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

Release Notes for Cisco IP/VC 3526

PRI Gateway and Cisco IP/VC 3540 PRI

Gateway Release 3.0

January 14, 2005

This release note describes the new features and known issues for the Cisco IP/VC

3526 PRI Gateway and Cisco IP/VC 3540 PRI Gateway Release 3.0. Use this

release note with the Cisco IP/VC 3526 PRI Gateway and Cisco IP/VC 3540 PRI

Gateway Module Administrator Guide, 2.0.

For regulatory and compliance information, see Regulatory Compliance and

Safety Information for the Cisco IP/VC 3500 Products.

Contents

This document include the following sections:

•Introduction, page 2

•Documentation Roadmap, page 2

•New and Changed Information, page 2

•Important Notes, page 3

Introduction

Release Notes for Cisco IP/VC 3526 PRI Gateway and Cisco IP/VC 3540 PRI Gateway Release 3.0

78-16907-01

•Known Issues, page 3

•Caveats, page 4

•Obtaining Documentation, Obtaining Support, and Security Guidelines,

page 6

Introduction

Cisco IP/VC 3526 PRI Gateway and Cisco IP/VC 3540 PRI Gateway perform

protocol translation that allows H.323 endpoints on a LAN to communicate with

H.320 endpoints on the public switched telephone network (PSTN). The Cisco

IP/VC 3526 PRI Gateway and Cisco IP/VC 3540 PRI Gateway support PRI ISDN

interfaces.

Documentation Roadmap

Table 1contains an overview of the related documentation for the

Cisco IP/VC 3526 and Cisco IP/VC 3540. Use this information to access and

order the latest versions of the documentation as described in the “Obtaining

Documentation” section on page 6.

New and Changed Information

Release 3.0 includes the following new features:

Table 1 Documentation Roadmap

Document Description

Cisco IP/VC 3526 PRI Gateway and

Cisco IP/VC 3540 PRI Gateway

Module Administrator Guide, 2.0

Provides an overview of the Cisco

IP/VC 3500 videoconferencing

solution, as well as installation,

configuration, and troubleshooting

information.

Regulatory Compliance and Safety

Information for the Cisco IP/VC 3500

Products

Provides regulatory compliance and

safety information and translations of

warning messages.

Release Notes for Cisco IP/VC 3526 PRI Gateway and Cisco IP/VC 3540 PRI Gateway Release 3.0

78-16907-01

Important Notes

•Support for the H.264 video codec.

•The gateway can detect in-band DTMF tones on the ISDN side and generate

corresponding H.245 out-of-band signals on the IP side for both voice and

video calls.

•Support for a new default Quality of Service option for optimal TOS setting

selection.

Important Notes

To ensure that your gateway is secure from outside infiltration, we recommend

that you change the default settings of the following options:

•Gateway user name and password

•SNMP service community parameters in the Board Basics tab

Known Issues

•We recommend that you use Microsoft Explorer version 5.0 or later.

•The Ethernet port may stop responding if disconnected and then reconnected

when there are active calls in the gateway. To restore Ethernet port

functionality, reset the gateway.

•The Max Digits and Maximum Digits Send fields in the ISDN Information

section of the PRI Port tabs are for future use.

•DTMF interpretation problems occur when using the G.723.1 audio channel

in gateway-to-MCU voice calls. Use the Force711ForMCU enable advanced

command to configure the gateway to open a G.711 channel only. This setting

is enabled by default when the gateway is shipped with transcoders. When the

gateway has no transcoders or when transcoder capabilities are disabled,

disable the setting by using the Force711ForMCU disable advanced

command.

•Some PSTN switches react slowly to a “busy out [off]” request message sent

from the gateway when the ISDN Rollover feature is in use. As a result,

dialing from the ISDN side may return a busy tone immediately after the

“busy out [off]” request message is sent to the switch. In such cases, calls do

not reach the gateway, and additional dialing is required.

Caveats

Release Notes for Cisco IP/VC 3526 PRI Gateway and Cisco IP/VC 3540 PRI Gateway Release 3.0

78-16907-01

•You must disable G.722.1 when working with TANDBERG endpoints that

are running software version 7.xwhen used with IVR on 128 Kbps calls. To

do this, uncheck the Enable G.722.1 option in the Media Modes section of the

Gateway Settings tab.

•You must disable G.722 when working with Aethra Vega 2 endpoints that are

running software version 2.182. To do this, uncheck the Enable G.722 option

in the Media Modes section of the Gateway Settings tab.

•FECC works with Sony, Polycom, and TANDBERG endpoints only.

•B-channels released on a downspeeding event during incoming Call Setup

will not be available for new calls until the call on which the downspeeding

event took place terminates.

•When working with endpoints that do not support Fast Start, ensure that the

default unchecked setting is selected for the Support H.323 Fast Start on

voice-only call setup option in the Advanced section of the Settings tab.

•The gateway may not register properly to the Polycom Path Navigator

gatekeeper. To enable successful registration, remove all services from the

gateway, register to Path Navigator, and then reconfigure the services on the

gateway.

•When using TANDBERG 6000 with software version B9.0 on the ISDN side,

bonded calls over 8B (512 Kbps) may not connect when dialing from the IP

side. Contact Cisco Technical Assistance Center (TAC) for assistance if you

experience this problem.

•G.723.1 coding does not work well with Sony PCS-1 on the IP side. To work

with PCS-1, disable the G.723.1transcoding option.

•Calls will not connect when using H.264 with VCON Escort/Cruiser version

4.6 on the ISDN side. To work with Escort/Cruiser version 4.6, disable the

H.264 video codec.

•Video channels may not open successfully when using the VCON 5000 on the

ISDN side.

Caveats

Open and resolved caveats are no longer listed in release notes. Instead, the latest

information about caveats is available through an online tool, Bug Toolkit, for

customers to query defects according to their own needs.

Release Notes for Cisco IP/VC 3526 PRI Gateway and Cisco IP/VC 3540 PRI Gateway Release 3.0

78-16907-01

Caveats

To find new features or enhancements that have been added to a release or to read

about caveat fixes from previous releases, you should run a query whenever a new

Cisco IP/VC 3526 PRI Gateway or Cisco IP/VC 3540 PRI Gateway release is

distributed.

To access Bug Toolkit, you must have an Internet connection and a Web browser,

as well as a Cisco.com username and password.

To use Bug Toolkit, follow this procedure.

Step 1 Go to http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl and log

in to Bug Toolkit by entering your Cisco.com user name and password.

Step 2 Click Launch Bug Toolkit.

Step 3 To find a specific caveat, enter the ID number in the Enter known bug ID field and

click Search.

Bug Toolkit returns the caveat information for which you queried.

To view all caveats, go to the Search for bugs in other Cisco software and

hardware products section, enter Cisco IP/VC 3500 Series Videoconferencing

Products in the Product Name field, and click Next.

The Bug Toolkit search page appears.

Step 4 Select the filters to query for caveats. You can choose any or all of the available

options.

Step 5 Click Next.

Bug Toolkit returns a list of caveats based on your query.

Obtaining Documentation, Obtaining Support, and Security Guidelines

Release Notes for Cisco IP/VC 3526 PRI Gateway and Cisco IP/VC 3540 PRI Gateway Release 3.0

78-16907-01

Obtaining Documentation, Obtaining Support, and

Security Guidelines

For information on obtaining documentation, obtaining support, providing

documentation feedback, security guidelines, and also recommended aliases and

general Cisco documents, see the monthly What's New in Cisco Product

Documentation, which also lists all new and revised Cisco technical

documentation, at:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

CCDE, CCVP, Cisco Eos, Cisco StadiumVision, the Cisco logo, DCE, and Welcome to the Human Network are

trademarks; Changing the Way We Work, Live, Play, and Learn is a service mark; and Access Registrar, Aironet,

AsyncOS, Bringing the Meeting To You, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, Cisco, the

Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the

Cisco Systems logo, Cisco Unity, Collaboration Without Limitation, Enterprise/Solver, EtherChannel, EtherFast,

EtherSwitch, Event Center, Fast Step, Follow Me Browsing, FormShare, GigaDrive, HomeLink, Internet Quotient,

IOS, iPhone, IP/TV, iQ Expertise, the iQ logo, iQ Net Readiness Scorecard, iQuick Study, IronPort, the

IronPort logo, LightStream, Linksys, MediaTone, MeetingPlace, MGX, Networkers, Networking Academy, Network

Registrar, PCNow, PIX, PowerPanels, ProConnect, ScriptShare, SenderBase, SMARTnet, Spectrum Expert,

StackWise, The Fastest Way to Increase Your Internet Quotient, TransPath, WebEx, and the WebEx logo are

registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.

All other trademarks mentioned in this document or Website are the property of their respective owners. The use of

the word partner does not imply a partnership relationship between Cisco and any other company. (0801R)

Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples,

command display output, and figures included in the document are shown for illustrative purposes only. Any use of

actual IP addresses in illustrative content is unintentional and coincidental.

Table des matières

Autres manuels Cisco Porte

Cisco

Cisco Explorer 9800 Multi-Screen Series Manuel utilisateur

Cisco

Cisco DPC2320 DOCSIS Manuel utilisateur

Cisco

Cisco VG202 Manuel

Cisco

Cisco ASR 5x00 Home eNodeB Mode d’emploi

Cisco

Cisco ATA 186 Manuel de l'opérateur

Cisco

Cisco DPC2434 Manuel utilisateur

Cisco

Cisco ASR 5000 Series Mode d’emploi

Cisco

Cisco Small Business Pro SA520 Guide de dépannage

Cisco

Cisco DPC2434 Mode d'emploi

Cisco

Cisco VG400 series Manuel

Cisco

Cisco VG450 Mode d’emploi

Cisco

Cisco SPA232D Mode d’emploi

Cisco

Cisco Small Business SPA8000 Manuel utilisateur

Cisco

Cisco TELEPRESENCE ISDN GATEWAYS 2.0 Guide de référence

Cisco

Cisco 2650XM Instructions d'installation et d'utilisation

Cisco

Cisco EPC3928 DOCSIS Manuel utilisateur

Cisco

Cisco DPC3929CM Manuel utilisateur

Cisco

Cisco DPC3941 Manuel utilisateur

Cisco

Cisco Network Device MGX 8240 Manuel utilisateur

Cisco

Cisco EVM-IPVS-16A Guide de démarrage rapide

Cisco

Cisco VG30D Manuel utilisateur

Cisco

Cisco TelePresence ISDN GW MSE 8321 Manuel utilisateur

Cisco

Cisco DPA 7610 Mode d’emploi

Cisco

Cisco IG21 Series Mode d’emploi

Manuels Porte populaires d'autres marques

LST

LST M500RFE-AS Manuel utilisateur

Kinnex

Kinnex Media Gateway Manuel utilisateur

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuel utilisateur

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuel utilisateur

Telsey

Telsey CPVA 500 - SIP Manuel utilisateur

RTA

RTA 460A-NNA4 Fiche technique

Shaw

Shaw Gateway HDPVR Manuel utilisateur

ABB

ABB VSN900 Guide de démarrage rapide

Commander

Commander Pulse Manuel utilisateur

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuel utilisateur

NETGEAR

NETGEAR C6300BD Manuel utilisateur

Amit

Amit CDW531AM Manuel utilisateur

HMS

HMS Netbiter EasyConnect EC150 Manuel utilisateur

Huawei

Huawei EchoLife HG620 Manuel utilisateur

AT&T

AT&T U-verse 3801 Manuel d'utilisation et d'entretien

Logic IO

Logic IO RTCU MX2 turbo Manuel utilisateur

Suttle

Suttle MediaMAX MXM-521 Manuel utilisateur