Cisco TelePresence DX80 Manuel utilisateur

Quick Reference Guide

DX80 Touchscreen

Service Desk 204-940-8500 Option 4, Option 1

or toll-free 1-866-999-9698 Option 4, Option 1

rev 04Apr2019 Page 1 of 2

www.mbtelehealth.ca

1. Tap Call.

2. Tap in the search/dial eld and enter the .

phone number using the keypad.

3. Tap Call to connect.

Camera with privacy shutter,

turn counter-clockwise to

shut and clockwise to open.

Power On/O󰀨Microphone

in each leg

Loudspeaker

Microphone mute button,

loudspeaker volume controls

and USB socket are on the

side of the unit.

Make a Call

The Home screen should always be

displayed prior to connecting to a site;

if not, this may mean that a previous

call was not disconnected. If you do

not see the Home screen, press End to

disconnect prior to connecting your call.

Switch between computer monitor and

video screen by tapping the screen.

(When using as a desktop unit: if you

do not see the menu items along the

bottom of the screen, this may indicate

that the monitor is in sleep mode.

Move the mouse or press a key on the

keyboard to wake it up.)

Site to Site Call

Far End Control Site to Site/Layout multi-site

Multi-site

The default layout is shown on the right. Other layout options

may be selected by the host/presenter when booking an event.

Selfview options

1. Tap Call.

2. Tap in the search/dial eld and enter the 5 digit number using the keypad.

3. Tap either of the green Call buttons to connect.

1. Tap Selfview to turn it on and

o󰀨. Ensure you are visible so the other

site can see you.

2. Tap and hold the selfview image to see

available positions on the screen.

3. Drag to the desired location and

release.

Multi-Site Call

You will be automatically connected (see

note on back)

Press End to disconnect at the end of

every call (Site to Site and Multi-site).

Out of Province Call

Fig 2Fig 1

Touchscreen-

this unit does

not require a

remote control.

This unit is available as a desktop, mobile cart or xed unit.

Note: When using a mobile cart you will need to plug it in and turn on the power.

Site to Site

• Tap Participants , tap the participant, then tap Camera. (Fig 1)

• Adjust the other site’s camera using the pan/tilt arrows and zoom +/-. Tap ....

outside the controls to return to near end (Fig 2).

(Note: This only applies if the other site has a remotely controllable camera - the

DX80 has a xed camera along with some other types of equipment.)

Quick Reference Guide

DX80 Touchscreen

Service Desk 204-940-8500 Option 4, Option 1

or toll-free 1-866-999-9698 Option 4, Option 1

rev 04Apr2019 Page 2 of 2

www.mbtelehealth.ca

Dual Video: If you are connected to another piece of equipment that has dual video enabled they are able to see

both of your feeds; both your camera view and your presentation and will have full control over their own layout.

If you would like to change the

layout, tap Layout and select

your preferred layout.

Share Presentation and Change Presentation Layout In a Call

Select your preferred

layout by tapping it.

Tap Stop sharing to stop

sharing your presentation.

Tap Share and the content

will be shared with the other

participant/s.

An onscreen message will be

displayed when you are sharing.

Tap Show PC to display your

screen locally - it will not be shown

to other participants. To hide, tap

Hide PC.

Note: Connect your laptop and

make sure it is turned on.

• Multi-site sessions will be connected automatically at the scheduled start time.

• If you are registered for the event and it is already in progress and you are NOT connected, you can join by

using the connection information shown on the Whiteboard.

• Multi-site sessions will be automatically disconnected at the scheduled end time.

Autres manuels pour TelePresence DX80

Autres manuels Cisco Système de conférence

Cisco

Cisco Webex Room 70 Panorama Manuel utilisateur

Cisco

Cisco TelePresence MX700 Manuel utilisateur

Cisco

Cisco EX90 Manuel utilisateur

Cisco

Cisco EX90 Manuel utilisateur

Cisco

Cisco TelePresence Profile Series Manuel utilisateur

Cisco

Cisco Webex Room Panorama Manuel utilisateur

Cisco

Cisco TelePresence SX10 Manuel de service

Cisco

Cisco TelePresence System Codec C40 Manuel de service

Cisco

Cisco Webex Room Kit Mini Manuel utilisateur

Cisco

Cisco TelePresence SX10 Manuel de service

Cisco

Cisco 8865 Manuel utilisateur

Cisco

Cisco TelePresence DX70 Manuel utilisateur

Cisco

Cisco MX200 Series Manuel utilisateur

Cisco

Cisco TelePresence System Codec C90 Manuel utilisateur

Cisco

Cisco TANDBERG Quick Set C20 Mode d’emploi

Cisco

Cisco TelePresence IX5000 Manuel

Cisco

Cisco MX200 G2 Manuel utilisateur

Cisco

Cisco TelePresence SX20 Manuel utilisateur

Cisco

Cisco Webex Share Manuel utilisateur

Cisco

Cisco Board Manuel utilisateur

Cisco

Cisco TelePresence SX10 Manuel utilisateur

Cisco

Cisco 500 Series Manuel utilisateur

Cisco

Cisco MCU 5300 series Manuel utilisateur

Cisco

Cisco TelePresence Profile Series Manuel utilisateur

Manuels Système de conférence populaires d'autres marques

Kramer

Kramer VIA GO Manuel utilisateur

AVT

AVT MAGIC AC1 Go Manuel utilisateur

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Manuel utilisateur

Sony

Sony PCS-I150 Manuel utilisateur

Middle Atlantic Products

Middle Atlantic Products VTC Series Manuel utilisateur

Prentke Romich Company

Prentke Romich Company Vanguard Plus Mode d’emploi

Speakerbus

Speakerbus iD 712 Manuel utilisateur

Trelleborg

Trelleborg SafePilot CAT PRO Manuel utilisateur

Sennheiser

Sennheiser ADN Manuel utilisateur

ADTRAN

ADTRAN NetVanta 7100 Manuel utilisateur

AINA

AINA PTT Voice Responder Manuel utilisateur

Yamaha

Yamaha ProjectPhone PJP-100H Manuel utilisateur

vissonic

vissonic VLI Series Manuel utilisateur

Panasonic

Panasonic KX-VC500 Manuel utilisateur

Poly

Poly Trio 8300 Manuel utilisateur

Crestron

Crestron Mercury CCS-UCA-SMK Dessin dimensionnel

Inmarsat

Inmarsat mini M Manuel utilisateur

Tenveo

Tenveo ALL-IN-ONE Manuel utilisateur