Cisco EX90 Manuel utilisateur

Cisco TelePresence System EX90

installation guide

EX90 is delivered with:

• EX90 unit

• Touch screen with cable

• Handset base with cable

• Handset

• AC adapter and power cable

• DVI-D to DVI-I cable

(recommended for optimal PC

image quality)

• VGA to DVI-I cable

• Stereo audio cable 3.5mm

• Ethernet cable

• Screwdriver

• Cleaning cloth

User documentation

User guides and compliance and safety information for this product

are available at the Cisco web site: http://www.cisco.com/go/ex-docs

1Unpacking the touch screen and cables

Lift the rectangular box out of

the package.

In the box you will find the

cables, and another box with

the touch screen and handset.

Unpack the touch screen with

the handset and handset base.

Handset

base

Touch

screen

Cables

2Unpacking the EX90 unit

Lay the package flat on the floor.

Pull the EX90, surrounded by foam

protection, out of the package.

EX90

Carefully loosen the foam protection.

Lift the EX90 and place it on a firm surface.

Weight: 14 kg / 31 lb

BFasten the two units together. The screws

are pre–mounted in the handset base.

Use the screwdriver and fasten the screws at the

handset base from the underneath.

AHold the touch screen and the handset

base in an upright position.

Move the two units together. Make sure the

connector on the handset base slides into the

corresponding hole on the touch screen.

CConnect the handset to the handset

base, and connect the handset cable.

3Optional: Mounting the handset

Tool: Screwdriver

EMC Class A declaration

This is a class A product. In a

domestic environment this product

may cause radio interference in

which case the user may be required

to take adequate measures.

声明

此为A级产品，在生活环境中，该产品可能会造成无线电干扰。在这种

情况下，可能需要用户对其干扰采取切实可行的措施。

WARNING: This is a class A product. In a domestic environment

this product may cause radio interference in which case the user

may be required to take adequate measures.

Touch

screen

Handset

base

4System overview and basic setup

Kensington lock

Scale 1:1

Remove the cover to get

access to the connectors

at the rear side.

Local area

network (LAN)

Touch screen Power supply

(use the supplied

AC adapter)

Optional LAN

connection for PC

For future

use

Optional

HDMI output

Optional

HDMI input

Optional PC

video input

Optional PC

audio input

Micro-

phone

Headset 2 x USB

Connect the touch screen,

LAN and power as illustrated.

To connect a PC, see more

details in step 5.

You may connect an

external microphone

and a headset to your

system (not provided).

5Connecting a PC

6Starting the system

Audio and video input from PC

Connect the audio and video cables from the PC.

We recomemend using the DVI-D to DVI-I video

cable for optimal PC image quality.

The cables are in the rectangular box, see

illustration in step 1.

Optional LAN connection for PC

If you have a single LAN wall outlet only, you may

connect your PC to the second RJ45 socket of

the EX90 (labelled with a PC symbol). Your PC and

the EX90 will then share the LAN connection.

Optional

LAN connection

for PC, RJ45

Scale 1:1

Video from PC,

DVI-I cable

Audio from PC,

Stereo cable

3.5mm mini jack

Power button

• Tap the power button once to switch on/

off the monitor.

• Press gently and hold the power button

to shut down the system.

Camera

• Turn to open/close the

privacy cover.

• Tilt downwards to use as

document camera.

Camera LED

Power LED

Please read the user documentation,

which is available on the Cisco web

site, for further information about

how to set up and use your system.

Autres manuels pour EX90

Table des matières

Autres manuels Cisco Système de conférence

Cisco

Cisco SX80 Manuel utilisateur

Cisco

Cisco Webex Share Manuel utilisateur

Cisco

Cisco Webex Room Kit Manuel utilisateur

Cisco

Cisco EX60 Manuel utilisateur

Cisco

Cisco SX80 Manuel de service

Cisco

Cisco TelePresence SX10 Manuel utilisateur

Cisco

Cisco Board Manuel utilisateur

Cisco

Cisco TelePresence SX20 Manuel de service

Cisco

Cisco TelePresence SX10 Manuel utilisateur

Cisco

Cisco MX Series Manuel utilisateur

Cisco

Cisco TelePresence Profile Series Manuel utilisateur

Cisco

Cisco TelePresence SX20 Manuel de service

Cisco

Cisco TelePresence SX10 Manuel utilisateur

Cisco

Cisco TelePresence SX20 Manuel de service

Cisco

Cisco MX200 G2 Manuel utilisateur

Cisco

Cisco TelePresence SX20 Manuel utilisateur

Cisco

Cisco TelePresence Profile Series Manuel d'installation et d'exploitation

Cisco

Cisco MX200 Series Manuel utilisateur

Cisco

Cisco TelePresence SX20 Manuel utilisateur

Cisco

Cisco TelePresence System C20 Plus Manuel utilisateur

Cisco

Cisco TelePresence System Codec C90 Mode d’emploi

Cisco

Cisco TELEPRESENCE VIDEO COMMUNICATION SERVER - COMMAND REFERENCE V... Manuel d'utilisation

Cisco

Cisco CTS 1000 - TelePresence System 1000 Video... Mode d’emploi

Cisco

Cisco TANDBERG Quick Set C20 Mode d’emploi

Manuels Système de conférence populaires d'autres marques

Kramer

Kramer VIA GO Manuel utilisateur

AVT

AVT MAGIC AC1 Go Manuel utilisateur

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Manuel utilisateur

Sony

Sony PCS-I150 Manuel utilisateur

Middle Atlantic Products

Middle Atlantic Products VTC Series Manuel utilisateur

Prentke Romich Company

Prentke Romich Company Vanguard Plus Mode d’emploi

Speakerbus

Speakerbus iD 712 Manuel utilisateur

Trelleborg

Trelleborg SafePilot CAT PRO Manuel utilisateur

Sennheiser

Sennheiser ADN Manuel utilisateur

ADTRAN

ADTRAN NetVanta 7100 Manuel utilisateur

AINA

AINA PTT Voice Responder Manuel utilisateur

Yamaha

Yamaha ProjectPhone PJP-100H Manuel utilisateur

vissonic

vissonic VLI Series Manuel utilisateur

Panasonic

Panasonic KX-VC500 Manuel utilisateur

Poly

Poly Trio 8300 Manuel utilisateur

Crestron

Crestron Mercury CCS-UCA-SMK Dessin dimensionnel

Inmarsat

Inmarsat mini M Manuel utilisateur

Tenveo

Tenveo ALL-IN-ONE Manuel utilisateur