CDA edd61 Instructions d'utilisation
Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY
T : 01949 862 012 F : 01949 862 003 E : customer.care@cda.eu W : www.cda.eu
www.cda.eu
edd61 & edd91
Extractors
Installation, Use and Maintenance
2
Important
The CDA Group Ltd cannot be held responsible for injuries or losses
caused by incorrect use or installation of this product. Please note
that CDA reserve the right to invalidate the guarantee supplied with
this product following incorrect installation or misuse of the appliance
or use in a commercial environment.
This appliance is not designed to be used by people (including
children) with reduced physical, sensorial or mental capacity, or
who lack experience or knowledge about it, unless they have had
supervision or instructions on how to use the appliance by someone
who is responsible for their safety.
Under no circumstances should any external covers be removed for
servicing or maintenance except by suitably qualified personnel.
Appliance information:
Please enter the details on the appliance rating plate below for
reference, to assist CDA Customer Care in the event of a fault with
your appliance and to register your appliance for guarantee purposes.
Appliance Model
Serial Number
CE Declarations of Conformity:
This appliance has been manufactured to the strictest standards and
complies with all applicable legislation, including Gas safety, Electrical
safety (LVD) and Electromagnetic interference compatibility (EMC).
3
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE
PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC.
At the end of its working life, the product must be taken to a special
local authority waste collection centre or to a dealer providing
appliance recycling services.
Disposing of a household appliance separately avoids possible
negative consequences for the environment and health. It also
enables the constituent materials to be recovered, saving both energy
and resources. As a reminder of the need to dispose of household
appliances separately, the product is marked with a crossed-out
wheeled dustbin.
Please note:
•Under no circumstances should the extractor be connected to any
gas ventilation system, flue system or hot air ducting system.
• Do not vent the extractor into an attic or loft space.
•Only house the extractor in rooms with adequate ventilation.
Remember that the extractor is powerful and whatever air is
extracted needs to be replaced.
•Do not tile the extractor in. It should be removable for service or
maintenance.
•You must be able to isolate the extractor from the mains electrical
supply after installation.
•This extractor has been designed to be used in a room with a
volume of less than 90 m.
4
•Steam cleaners must not be used when cleaning this appliance.
•The performance of your extractor will vary depending on a number
of factors. These include: type of extraction, length of ducting, room
volume, ventilation available and cleanliness of the filters.
5
Using Your Extractor
For best performance, you should switch on the extractor 15 minutes
before starting to cook and leave it to run for approximately 15
minutes after the end of cooking.
Control Panel
A - O key
B - On / “+” key
C - Speed selection display (4 LED’s)
D - “-” key
E - Timer key
To switch on the extractor or to increase the speed at any time
• While the appliance is switched o, touch the “On/+” key once
to raise the extraction panel to its full height. The moving panel will
raise to its operating position and the appliance will start to extract
at its slowest speed once it reaches 180mm above its rest position.
• To increase the speed, wait until the extractor has reached its full
height and is running at the first speed, then touch the “On/+” key
several times, until the desired speed is reached.
• The number of LED’s lit on the speed selection display
corresponds to the speed setting number (e.g. 2 LED’s lit for the
second speed).
Fig. 1
A B C D E
6
To decrease the speed at any time
• Touch the “-” key a few times, until the required speed is
reached.
To switch o the extractor
• Touch the “O” key : The moving panel will descend to its rest
position and the appliance will continue extracting until its height
drops below approx. 180mm, at which point the extraction will stop.
Timed operation
• While the extractor is operating, touching the “Timer” key once
will set it to run for a further ten minutes then automatically shut
down. This feature is most useful when you finish cooking and
need to leave the kitchen unattended.
Other features
• After approx. 30 hours of operation the speed selelction display on
the control panel will flash to signify that the grease filters are due
for cleaning. After they are cleaned and replaced (page 8) press
the “Timer” key once to reset the grease filter alarm timer.
• After the appliance has been running for 4 hours since the last
key touch, it will automatically shut down. This is not a fault and is
a feature to save power in the event that the appliance has been
forgotten.
• When the front panel is removed for cleaning, all the movement and
extraction functions are locked for safety.
• If anything obstructs the closure of the moving panel it will
automatically stop and return to its fully open position.
7
Energy saving feature
This extractor is fitted with an energy saving feature that automatically
reduces the motor speed if it is left on the highest setting. When the
motor speed is set to the fourth level, it will automatically switch to
level three after six minutes of operation.
Care and Maintenance
IMPORTANT: DO NOT PERFORM MAINTENANCE OR CLEANING
OF THE EXTRACTOR WITHOUT FIRST SWITCHING OFF THE
ELECTRICITY SUPPLY.
Cleaning
You should use a non-abrasive cleaner. Any abrasive cleaner
(including Cif) will scratch the surface and could erase the control
panel markings.
You can clean your extractor eectively by simply using a dilute
solution of water and mild detergent and drying to a shine with a
clean cloth, for example the CDA E-Cloth.
Cleaning the grease filters
The grease filters should be kept clean to minimise the risk of fire.
At least once a month you should remove and clean the grease
filters with hot soapy water. You can also wash the grease filters in
a dishwasher, ensuring that you place them in an upright position to
prevent damage from other items in the dishwasher. After rinsing and
drying, replace the filters.
8
To remove and replace the grease
filters
• Touch the “On/+” key so the
moving panel raises to its full extent,
then isolate the power supply so it
stays raised.
• By pulling the two top corners of the
front panel (Fig. 2) at the same time,
it will be released and pivot toward
you.
• The grease filters can then be pulled forward and out.
• Replacement is a reversal of the removal procedure.
Please note:
Cleaning the grease filters in the dishwasher may lead to
discolouration. This is normal and does not constitute a fault with the
appliance.
Changing the charcoal filters (re-circulating only)
To ensure best performance of your extractor, you should replace the
charcoal filters every four to six months, depending on use.
To replace the charcoal filters
• Remove the grease filters as described opposite.
• The charcoal filters can then be lifted out and the replacements
placed in position.
• Replace the grease filters as opposite.
Pull
Fig. 2
9
Mounting your Extractor
When the extractor is to be installed behind an electric or gas hob,
the minimum distance between the hob and extractor must exceed
50mm. In the case of a gas hob, the minimum distance from any
burner to the back of the hob must also be 65mm.
If the instructions provided with your gas hob state that the required
distance between the hob and extractor must be greater than
specified above, then that is the distance that should be observed;
this is a legal requirement and may lead to your hob being
disconnected from the gas supply and the installation being reported
to RIDDOR.
IN THE ABSENCE OF ANY INSTRUCTIONS SUPPLIED WITH THE
GAS HOB, THE MINIMUM DISTANCE BETWEEN THE HOB AND
EXTRACTOR MUST BE AT LEAST 50mm.
The width of any hob must not be greater than the width of the
extractor installed with it.
10
Troubleshooting
You observe that Possible Causes What should you do?
The hood does not work.
There ia a power outage. Check the power supply.
The 9 pin connector is faulty or
misconnected.
Check the orientation and
security of the 9 pin connector.
The internal breaker has tripped. Press the red reset key on the
electronic box.
The output is low.
The setting is insucient for the
fumes present. Try a more powerful setting.
Inadequate ventilation into the
kitchen.
Ensure there is adequate facility
for air intake to the kitchen.
The charcoal filter (if fitted) is
blocked. Replace the charcoal filter.
The exit ducting is obstructed. Remove any obstructions from
the ducting.
The exit flaps on the motor
housing are restricted. Ensure the flaps rotate freely.
The hood stops in mid operation.
There ia a power outage. Check the power supply.
The circuit breaker or fuse has
tripped. Check the circuit breaker or fuse.
In the event of a fault with the extractor, please contact CDA Customer
Care for assistance.
Contact CDA Customer Care
A: Customer Care Department, The CDA Group Ltd, Harby Road,
Langar, Nottinghamshire, NG13 9HY
T: 01949 862 012
F: 01949 862 003
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels CDA hotte de ventilation
CDA
CDA CCA5 Manuel utilisateur
CDA
CDA EZA60BL Guide de démarrage rapide
CDA
CDA EVB9 Manuel utilisateur
CDA
CDA EVPC91 Guide de démarrage rapide
CDA
CDA CIN6 Manuel utilisateur
CDA
CDA CIGE9 Manuel
CDA
CDA EVC4 Manuel
CDA
CDA EXG60BL Guide de l'utilisateur
CDA
CDA EVPK90 Fiche technique
CDA
CDA CCA5/7 Manuel de référence
CDA
CDA ECNK90 Guide de démarrage rapide
CDA
CDA 3D9BL Manuel de référence
CDA
CDA EVP6 Manuel utilisateur
CDA
CDA 3Z9 Manuel de référence
CDA
CDA CTE6 Manuel utilisateur
CDA
CDA EVG Series Manuel de référence
CDA
CDA EVPC9 Manuel de référence
CDA
CDA ECA SERIES Guide de démarrage rapide
CDA
CDA EVP6 Manuel
CDA
CDA ECPK9 Manuel de référence
