Casio XJ-S400U Manuel utilisateur

Projector

User Logo Transfer Guide

Be sure to keep all user documentation handy for future reference.

To obtain the latest version of this manual visit the website at the URL below.

https://world.casio.com/manual/projector/

Microsoft and Windows are registered trademarks or trademarks of Microsoft Corporation in the

United States and other countries.

Other company and product names may be registered product names or trademarks of their

respective owners.

The contents of this User’s Guide are subject to change without notice.

Copying of this manual, either in part or its entirety is forbidden. You are allowed to use this

manual for your own personal use. Any other use is forbidden without the permission of CASIO

COMPUTER CO., LTD.

CASIO COMPUTER CO., LTD. shall not be held liable for any lost profits or claims from third

parties arising out of the use of this product or this manual.

CASIO COMPUTER CO., LTD. shall not be held liable for any loss or lost profits due to loss of

data due to malfunction or maintenance of this product, or any other reason.

The sample screens shown in this manual are for illustrative purposes only, and may not be

exactly the same as the screens actually produced by the product.

MA1904-B

Introduction

This manual explains how to transfer a user logo to the projector.

A user logo is a still image that can be displayed when the projector is turned on (startup screen),

when the [BLANK] key is pressed (blank screen), and when there is no input signal detected (no signal

screen).

Note

How a user logo can be used depends on your CASIO projector model. See your projector’s

User’s Guide for detailed information.

To get ready for user logo transfer

You will need to prepare the items listed below in order to transfer a user logo to the projector.

A computer that satisfies the requirements described under “Minimum System Requirements”

below.

USB Cable

Prepare a cable with connectors that match the ports on the projector and your computer.

USB DRIVER for CASIO Projector (Driver required for the projector-computer USB connection)

CASIO Projector LOGO Loader (Special software for transferring a user logo to the projector)

Logo header data (.cph) for your projector

Image files to be used as a user logo

For information about this type of file, see “User Logo Image Files”.

Visit the website below to download USB DRIVER for CASIO Projector, CASIO Projector LOGO

Loader, and logo header data to your computer.

https://www.casio-intl.com/support/download/

Minimum System Requirements

Operating Systems : Microsoft

Windows

10; Windows

8.1/8; Windows

7 SP1

Computer : IBM PC/AT or compatible that conforms to the requirements below.

Microsoft

Windows

10; Windows

8.1/8; Windows

7 pre-installed

CPU :Pentium

M 1.6GHz or higher, or CPU recommended for operating

system being used

Memory : Amount of memory recommended for operating system being used

Display : Full-color display with resolution of at least 1024 × 768, which is

supported by above operating systems and the computer being

used.

Input device : Keyboard or other pointing device (mouse or equivalent device

supported by above operating systems)

Transferring a User Logo to the Projector

User Logo Image Files

The required specifications for a user logo image file are shown below.

Use of a file whose number of pixels matches that of your projector model’s resolution (1280 × 800 or 1024 × 768) is

recommended.

To install the USB driver

Important!

Perform the procedure below before connecting your computer to the projector with the USB

cable. If you connect first, your computer will not recognize the projector. If this happens,

disconnect the USB cable and then perform the procedure below.

Visit the CASIO website (page 2) and download USB DRIVER for CASIO Projector

to your computer.

Double-click the file (PjUsbDriverSetup_EN.exe) you downloaded.

Follow the instructions that appear on your computer screen.

Windows 7 and Windows 8.1/8: When the “User Account Control” message appears, click

[Yes].

File Format Color Number of Pixels

bmp RGB 24-bit full color 640 × 480 to 1280 × 800

To transfer a user logo to the projector

Important!

Using the procedure below to transfer a user logo to a projector will delete any existing logo data

currently in projector memory.

On the computer you plan to use for user logo transfer, visit the CASIO website

(page 2), and download CASIO Projector LOGO Loader and the required header

data (both as zip format files).

After file download is complete, unzip the files and then place the unzipped files into the same

folder on your computer.

Place a copy of the image file you want to use as a user logo in the same folder

as the above files.

Unplug the projector power cord from the power outlet.

Connect the projector to the computer.

Connect the projector’s firmware update USB port or ROM update port to a USB port on your

computer. See your projector’s User’s Guide for detailed information about where ports are

located.

Plug the projector power cord back in and turn on the projector.

This will cause the projector’s POWER indicator to flash amber (lit one second, unlit one

second).

On your computer, exit all other applications that are running.

Double-click the CASIO Projector LOGO Loader file (PjLogoLoader_EN.exe) you

downloaded in step 1.

This will display the CASIO Projector Logo Loader window.

Click the [Choose] button next to “LOGO Header File”.

On the “Open File” dialog box that appears, select the applicable logo header

data (.cph) and then click [Open].

This will return to the CASIO Projector LOGO Loader window. At this time, check to make sure

that “Format: OK” is displayed to the right of “LOGO Header File”.

If it isn’t it could mean that the logo header data you are using is intended for a different

projector model or that there is a problem with the logo header data. If this happens, go to the

CASIO website and download the correct logo header data for your projector and then

perform this procedure from step 8 again.

10.

Click the [Choose] button next to “Image File”.

11.

On the “Open File” dialog box that appears, select the image file you want to use

as the user logo, and then click [Open].

This will return to the CASIO Projector LOGO Loader window. At this time, check to make sure

that “Format: OK” is displayed to the right of “Image File”.

If it isn’t, it could mean that there is some problem with the image file you selected as a user

logo file. If this happens, repeat this procedure from step 10 above, making sure that the logo

file you select matches the required specifications under “User Logo Image Files” (page 3).

12.

Click the [Upload] button.

This will start transfer of the logo header data and the image file to the projector. The

projector’s POWER indicator will go out to indicate that data transfer is in progress. The

CASIO Projector LOGO Loader window on the computer screen will show a progress bar that

indicates the progress of the transfer.

The dialog box shown below will appear and the projector’s POWER indicator will flash amber

when transfer is complete.

Important!

Do not turn off the projector or computer, and do not disconnect the USB cable connecting the

projector and computer while data transfer is in progress.

13.

Click the [OK] button to close the dialog box.

14.

Exit CASIO Projector LOGO Loader by clicking the close ( ) button in the

upper right corner of its window.

15.

Disconnect the USB cable connecting the projector to the computer, and then

unplug the projector power cord from the power outlet.

CASIO Projector LOGO Loader Error Messages

Error Message Possible Cause and Required Action

There is a problem with the file

format.

ID-01

There may be something wrong with the logo header data.

Download the logo header data for your projector again and then perform the

procedure under “To transfer a user logo to the projector” again.

A connection could not be

established with the projector.

Check the USB cable connection,

turn the projector off and then

back on, and then try again.

ID-02

Could not connect with the projector. Check the points below.

Is the USB driver installed on the computer? See “To install the USB

driver”.

Is the USB cable connected correctly to the computer and the projector?

Is the projector turned on?

This logo header file is for a

different model.

ID-04

The logo data cannot be transferred because it is for a different projector

model.

Go to the CASIO website and download logo data that is compatible with your

projector model, and then perform the procedure under “To transfer a user

logo to the projector” again.

The logo data was too large to

transfer.

Reduce the image size and try

again.

ID-05

The image file is too large (too many pixels). Use a file that is the appropriate

size as described under “User Logo Image Files”.

This type of image file is not

supported.

ID-06

The image file is not the correct type. Use a file that is the appropriate type as

described under “User Logo Image Files”.

Ce manuel convient aux modèles suivants

Autres manuels Casio Projecteur

Casio

Casio XJ-F Series Manuel utilisateur

Casio

Casio XJ-A230 Manuel utilisateur

Casio

Casio SLIM XJ-A141 Manuel utilisateur

Casio

Casio XJ-V2 Manuel utilisateur

Casio

Casio XJ-360 Manuel de référence

Casio

Casio XJ-A130V SERIES Manuel utilisateur

Casio

Casio XJ-S41 - XGA DLP Projector Manuel utilisateur

Casio

Casio SLIM XJ-A251 Manuel d'instructions et de sécurité

Casio

Casio XJ-M140 Manuel utilisateur

Casio

Casio XJ-460 - XGA DLP Projector Manuel d'instructions

Casio

Casio XJ-S37 - XGA DLP Projector Manuel d'instructions et de sécurité

Casio

Casio XJ-M141 Manuel utilisateur

Casio

Casio XJ-S42/XJ-S47 Manuel utilisateur

Casio

Casio XJ-A130V SERIES Manuel utilisateur

Casio

Casio YC-400 - Document Camera Manuel utilisateur

Casio

Casio XJ-UT312WN Manuel utilisateur

Casio

Casio XJ-H1700 Manuel utilisateur

Casio

Casio XJ-S43W - WXGA DLP Projector Manuel utilisateur

Casio

Casio CX-E1 Manuel utilisateur

Casio

Casio XJ-V100W Manuel utilisateur

Casio

Casio XJ-H1600 Manuel utilisateur

Casio

Casio XJ-UT310WN Manuel utilisateur

Casio

Casio XJ-S31 - XGA DLP Projector Manuel utilisateur

Casio

Casio XJ-A145V SERIES Manuel utilisateur

Manuels Projecteur populaires d'autres marques

iEmmet

iEmmet MP-312 Manuel utilisateur

Epson

Epson VS400 Manuel utilisateur

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuel utilisateur

Sony

Sony VPL-HW65ES Manuel de service

Toshiba

Toshiba TLP-791U Manuel utilisateur

Philips

Philips LC1341 Guide de référence

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur

NEC

NEC NP600S EDU Manuel utilisateur

BenQ

BenQ SH753P Manuel utilisateur

Eiki

Eiki EK-623U series Manuel utilisateur

Epson

Epson PowerLite Pro Cinema 6020UB Manuel utilisateur

Epson

Epson PowerLite Home Cinema 705HD Manuel utilisateur

Christie

Christie LHD700 Manuel utilisateur

Navitar

Navitar FX Manuel utilisateur

InFocus

InFocus LitePro 560 Manuel utilisateur

Sony

Sony SRX-R815P Manuel utilisateur

Vivitar

Vivitar DP1500 X Manuel utilisateur

Acer

Acer C20 Series Manuel utilisateur