Car and Driver CAD-6057 Manuel utilisateur

User Manual

CAD-6057

We’re here to help!

Call us at this number

(833) 227-3274

Or email us

[email protected]

FCC Statement

This device complies with part 15ofthe FCC rules. Operation is

subject tothe following two conditions (1) this device may notcause

harmful interference, and (2) this device must accept any

interference received, including interference that may cause

undesired operation.

This equipment hasbeen tested and found tocomply with the limits

for a Class B digital device, pursuant toPart 15ofthe FCC Rules.

These limits are designed toprovide reasonable protection against

harmful interference in a residential installation. This equipment

generates uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference toradio communications. However, there is no

guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference toradio or

television reception, which can be determined by turning the

equipment off and on, the user is encouragetry tocorrect the

interference by one ormore of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to operate

the equipment.

This equipment complies with FCC radiation exposure limits set

forth for an uncontrolled environment. This equipment should be

installed and operated with minimum distance 20cm between the

radiator & your body.

Important Safety Instructions

1. SAVE THESE INSTRUCTIONS- This manual contains important

safety and operating instructions for CAD6057.

2. Before using CAD4057, read all instructions and cautionary

markings on Vehicle Battery Adapters.

3. Do not expose charger to rain, moisture, or snow.

4. When replacing an old fuse, use a new fuse with the same type

and rating to prevent fire or electric shock.

5. Make sure the cord is located where it will not be stepped on,

tripped over, or otherwise subjected to damage or stress.

6. Do not operate the charger if it has a damaged cord or power

connector. Replace it immediately.

7. Do not operate charger if it has received a sharp blow, been

dropped, or otherwise damaged in any way. Take it to a qualified

serviceperson.

8. Do not disassemble the charger; take it to a qualified

serviceperson when service or repair is required. Incorrect

reassembly may result in a risk of electric shock or fire.

9. To reduce risk of electric shock, unplug the charger before

attempting any maintenance or cleaning. Turning off controls will

not reduce this risk.

1Introduction

Specifications

•Frequency: 2.402 ~ 2.480 GHz

•Working Current: 45mA (Max)

•Stand-by Current: 25mA (Max)

•Effective Range:5m

•Frequency: 88MHz – 108.0MHZ

•Input: DC12-24V

•Output: DC5V2.4A + PD30W

•Power: 122wmax

Features

•Stream music from your Bluetooth enabled device toa

car’s stereo via FMsignal

•LED display that shows the car’s voltage when

connected topower

•Allows you to answer calls and speak hands-free

•Built-in microphone forphone calls

•Two charging ports: USB and Type C ports

•Two 12V charging sockets

•Siri/Google activation

2Getting Started

Power-on

The device turns on automatically when plugged into a car

cigarette lighter.

Frequency and Volume Adjustment

•This device supports frequencies of 88-108 MHz. Press

and hold the button and then press or to adjust

the FM frequency.

•Adjust the volume with the and buttons.

Using Bluetooth

•Plug the device into one of the 12V charging sockets (the

device will power on after you plug it in).

•Check your smartphone to make sure Bluetooth is turned

on, then search for/select your FM transmitter. It will

show up as “CAD-6057.”

•Tune the car’s FM radio frequency to an unused FM

station.

•Tune the FM transmitter to the same frequency.

•You will now be able to stream content from your device

to your car speakers.

NOTES：

When powered on, the device will automatically connect

to the most recently used device. To avoid this, turn

Bluetooth off on the devices you aren’t streaming music

from.

The FM transmitter signal can be affected by other radio

stations or similar frequencies. This is normal, but if the

problem persists, try streaming through another FM

frequency.

Making & Answering Calls

The transmitter can make or answer a call after it is

successfully connected to your phone via Bluetooth.

•Redial the last number: double-click the button

•Reject a call: press and hold down for about 3

seconds

•Answer a call: press once

•Hang up a call: press once

Activating Siri/Google

•Double press the Forward button to activate the voice

command system

•Make requests like “Call mom” or “Call Dad”

Replacing the Fuse

•If your device is not charging properly, it is possible that

the fuse needs to be replaced.

•To replace the fuse, grip the charging tip (labeled in the

diagram as “the positive power supply”) and twist left. It

will unscrew.

•Replace the fuse with the extra included in the package,

then screw the device closed.

SUMMIT CE GROUP ONE YEAR LIMITED WARRANTY

SUMMIT CE GROUP LIMITED WARRANTY (“Warranty”) ― For Product

Categories Listed in Chart Below (as applicable, “Product”) Before

returning your Product for service under this Warranty, please (i) read

the instruction manual carefully. If you are still having trouble with

your Product, please contact Technical Support at

support@cddashcams.com

Warning: Some Products may contain components that are small

enough to be swallowed. Please keep out of reach of children.

Subject to the terms and conditions herein, SUMMIT CE GROUP LLC

(hereinafter called “SUMMIT CE GROUP”) warrants to the original

purchaser of the Product (“Customer”) that for the applicable

Warranty Period listed below, the Product will be free from defects in

material or workmanship under normal, non-commercial use

(“Defects”). Warranty Period encompasses, as listed below, separate

“Coverage Periods” for Parts and Labor, each Coverage Period for one

year, to begin from the original date of Customer purchase. If

Customer returns a defective Product (or any component thereof)

during the applicable Warranty Period, SUMMIT CE GROUP will, at its

option, during the specified Coverage Periods for Parts and Labor (as

applicable) either: (i) repair the Product (or, as applicable, any

component thereof) or (ii) replace the Product (or, as applicable, any

component thereof) with a new or refurbished Product (or, as

applicable, any component thereof), in either case free of charge to

Customer for Parts and/or Labor (as applicable) during the specified

Coverage Period only, and excluding applicable shipping charges

(noted below), for which the Customer is responsible. The foregoing

states the Customer’s exclusive remedy and SUMMIT CE GROUP’s

sole liability for breach of the limited warranty contained herein.

This warranty specifically excludes any Product (or, as applicable, any

component thereof) that has been subject to or Defects resulting

from: (a) any neglect or misuse by a Customer, an accident, improper

application, violation of operating instructions for the Product, any

other Customer-induced damage, or the alteration or removal of any

Product serial number; (b) any modification of repair to Product (or,

as applicable, any component thereof) by any party other than

SUMMIT CE GROUP or a party authorized in writing by SUMMIT CE

GROUP; (c) any damage to Product (or, as applicable, any component

thereof) due to power surges, incorrect electrical

voltage, misconnection to any device, or malfunction of any device

used with the Product (or, as applicable, any component thereof); (d)

cosmetic damage to the Product (or, as applicable, any component

thereof) caused by normal wear and tear; (e) shipping damage that

occurs while the Product is in transit; (f) damage caused by heat

sources, sunlight, electromagnetic conditions, or other climatic

conditions; or (g) any acts of God. Product is sold to Customer for

personal, non-commercial use only. Product is not warranted for

Customer’s commercial or rental use.

In addition, Product is not warranted against failure, and should not

be used by Customer for any application where (i) there is a risk that

any data stored on Product will be breached or otherwise

compromised, or (ii) the data stored on Product is relied upon for

medical or lifesaving applications. SUMMIT CE GROUP disclaims any

Warranty for any of the foregoing uses to the fullest extent permitted

by law. Customer assumes any and all risks associated with such uses

of Product, and agrees to indemnify SUMMIT CE GROUP for any

damages claimed against SUMMIT CE GROUP for such uses. EXCEPT

FOR EXPRESS WARRANTIES STATED ABOVE AND TO THE MAXIMUM

EXTENT PERMITTED BY LAW, THE PRODUCTS ARE PROVIDED “AS IS”,

AND SUMMIT CE GROUP DISCLAIMS ALL OTHER WARRANTIES,

INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY (I) OF

MERCHANTABILITY, (II) OF FITNESS FOR A PARTICULAR PURPOSE, OR

(III) OF NON-INFRINGEMENT OF THIRD PARTY RIGHTS. TO THE

MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT

WILL SUMMIT CE GROUP BE LIABLE TO CUSTOMER OR ANY THIRD

PARTY FOR ANY INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL,

EXEMPLARY OR PUNITIVE DAMAGES, INCLUDING, WITHOUT

LIMITATION, ANY LOST PROFITS OR REVENUES, LOSS OR INACCURACY

OF ANY DATA OR COST OF SUBSTITUTE GOODS, REGARDLESS OF THE

THEORY OF LIABILITY (INCLUDING NEGLIGENCE) AND EVEN IF

SUMMIT CE GROUP HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH

DAMAGES, SUMMIT CE GROUP’S AGGREGATE LIABILITY TO

CUSTOMER FOR ACTUAL DIRECT DAMAGES FOR ANY CAUSE

WHATSOEVER SHALL BE LIMITED TO THE CUMULATIVE PRODUCT

FEES PAID BY THAT CUSTOMER FOR THE PRODUCT CAUSING THE

DAMAGES, IF ANY. This Warranty gives Customer specific rights, and

Customer may also have other rights that vary from jurisdiction to

jurisdiction. To obtain Warranty service, Customer must email

Autres manuels Car and Driver Émetteur

Car and Driver

Car and Driver CAD-9900 Manuel utilisateur

Manuels Émetteur populaires d'autres marques

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manuel du propriétaire

Honeywell

Honeywell 5816WMBR Manuel utilisateur

Kamstrup

Kamstrup READy MTU Mode d'emploi

Omega

Omega ZW Series Manuel utilisateur

ABB

ABB Field 264H Mode d’emploi

Alinco

Alinco DJ-V17T Manuel utilisateur

Dejero

Dejero EnGo 3x Manuel utilisateur

Rosemount

Rosemount 4600 Manuel utilisateur

Speaka Professional

Speaka Professional 2342740 Manuel utilisateur

trubomat

trubomat GAB 1000 Manuel utilisateur

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manuel utilisateur

Rondish

Rondish UT-11 Manuel utilisateur

MG 10JRE Manuel utilisateur

Burkert

Burkert 8177 Manuel utilisateur

Firetide

Firetide HotPort 3203 Manuel

Tele Radio

Tele Radio T9-02 Manuel utilisateur

Rotronic

Rotronic HygroFlex HF3 Series Manuel utilisateur

Jamara

Jamara FCX6 Pro Tel Manuel utilisateur