Caple DD901BK Manuel utilisateur
Downdraft Extractor
Instruction Manual
DD901BK
Contact Caple on 0117 938 7420 for spare parts or www.caple.co.uk
Instruction manual DD901BK
2Please keep this instruction manual for future reference
CONTENTS
Introduction 3
Safety Instructions and Warnings 4
Installation 8
Electrical Connection of the Downdraft Extractor 12
Appliance Description 14
Operating the Downdraft Extractor 15
Care and Maintenance 17
Troubleshooting 18
Instruction manual DD901BK 3
Please keep this instruction manual for future reference
INTRODUCTION
Thank you for choosing this Caple downdraft extractor.
To ensure that you get the best results from your new
downdraft extractor, we strongly suggest that you read
this instruction manual thoroughly before use. If treated
with care, your Caple product should give you years of
trouble-free use.
To register ownership, please ensure you complete and
return the guarantee card supplied with the appliance or
visit www.caple.co.uk and register here.
This instruction manual is designed to provide you with
all the required information related to the installation, use
and maintenance of the appliance.
This downdraft extractor is designed to extract unpleasant
odours and cooking vapours from the kitchen. In order
to operate the unit correctly and safely, please read this
instruction manual carefully before installation and use.
Please read this manual carefully before using your
appliance. It contains important safety advice; it explains
how to use and look after your appliance so that it will
provide you with many years of reliable service.
Should a fault arise, please first consult the
“Troubleshooting” section. You can often rectify minor
problems yourself, thus saving unnecessary service costs.
Please keep this manual in a safe place and pass it on to
new owners for their information and safety.
Instruction manual DD901BK
4Please keep this instruction manual for future reference
SAFETY INSTRUCTIONS
AND WARNINGS:
-These hoods have been designed for personal use in the
home. The appliance must be used by adults. Make sure
that the appliance is out of reach of children and that
they do not use it to play with. Make sure that children
do not operate the controls.
-When the appliance is delivered, check the overall
appearance of the packaging and the product, to ensure
there is no damage.
-Any damage should be reported to your retailer straight
away.
-Your appliance is designed for normal domestic use.
It is not designed for commercial or industrial use, or for
purposes other than those for which it was designed.
-Any consequences of or damage from incorrect
installation or incorrect use of the appliance will not be
covered by the manufacturer’s guarantee.
-Do not ever change or try to change the characteristics
of this appliance. This would be a danger. Repairs must
be performed only by an authorised technician.
-Always disconnect the hood before carrying out cleaning
or maintenance operations.
-Adequately ventilate the room when a cooker hood
and other appliances, powered by energy other than
electricity, are used simultaneously, so that the hood
does not suck any combustion fumes.
Instruction manual DD901BK 5
Please keep this instruction manual for future reference
-It is not allowed to cook food over open flames (flambé)
or operate gas hobs without pots or pans on them under
the hood itself (the flames sucked into the hood might
damage the appliance).
-Frying near the appliance must be done under constant
supervision as hot oils and fats may ignite.
-Respect the guidelines for cleaning and replacement of
grease filters. Accumulated deposits of grease are a fire
hazard.
-This appliance must not be used over cook tops powered
by wood or coal or in any case, over cook tops with
power levels that could damage the appliance.
-Never use steam or high-pressure devices for cleaning
your hood (regulations regarding electrical safety).
-Never use the cooker hood without the grease filters.
-The minimum distance between the Downdraft (closed)
and the surface above it must be at least 200mm.
-When handling the downdraft, never put your hands in
the field of action of the extractable unit.
-There must be a minimum space of 50mm between the
edge of a gas hob and the downdraft frame.
-Constantly seeking to improve our products, we reserve
the right to modify their technical, functional, or
aesthetic characteristics deriving from their upgrading.
-In the case of the version with external motor, for normal
downdraft operation, it is necessary to use a suctioning
unit (external motor) made by the same manufacturer.
Instruction manual DD901BK
6Please keep this instruction manual for future reference
-The air collected must not be conveyed into a flue
used for smoke or fumes from appliances powered by
anything other than electricity (central heating systems,
etc.). As far as discharging exhaust air is concerned,
please follow the guidelines given by competent
authorities.
-This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person responsible
for their safety.
-Children should be supervised to ensure that they do not
play with the appliance.
GENERAL INFORMATION ON
THE DOWNDRAFT EXTRACTOR:
-It is designed to work in both vented mode, with outside
evacuation, and recirculation mode.
-Keep these instructions for use with the appliance. If the
appliance should be sold or passed on to others, make
sure that the instructions are passed on with it. We thank
you for taking note of these suggestions before installing
and using the appliance. They have been written for your
personal safety and the safety of others.
Instruction manual DD901BK 7
Please keep this instruction manual for future reference
ENVIRONMENTAL PROTECTION
Waste electrical products should not be disposed of with household waste. Please recycle where
facilities exist. Check with your Local Authority or retailer for recycling advice. This appliance is
marked according to the European directive on Waste Electrical and Electronic Equipment (WEEE).
By ensuring this product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be caused by
inappropriate waste handling of this product. The symbol on the product indicates that this
product may not be treated as household waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and electronic equipment. Disposal must be carried
out in accordance with local environmental regulations for waste disposal.
For more detailed information about treatment, recovery and recycling of this product, please
contact your local council, your household waste disposal service or the retailer where you
purchased the product
CE DECLARATIONS OF CONFORMITY
This appliance has been manufactured to the strictest standards and complies with all applicable
legislation, Low Voltage Directive (LVD) and Electromagnetic Compatibility (EMC).
Instruction manual DD901BK
8Please keep this instruction manual for future reference
INSTALLATION
Before carrying out the appliance installation, please check that all components are not damaged,
in such a case contact your retailer and do not carry out any installation operation.
Before the installation of the Downdraft, please remove all of the packaging. Furthermore, please
read carefully all of the following installation instructions.
»Use an air exhausting pipe whose maximum length does not exceed 5 meters.
»Limit the number of elbows in the piping, since each elbow reduces the air capacity of 1 linear
meter. (Eg: if you use no. 2 x 90˚ elbows, the length of piping should not exceed 3 meters).
»Avoid abrupt direction changes.
»Use a 150mm. constant diameter pipe for the whole length.
»Use piping approved by standards in force.
The manufacturer shall not be deemed responsible for air capacity or noise problems caused by
failure to comply with the above instructions and no warranty on the product shall be provided.
Before making the worktop cut out, check that there are no structural interference or other parts
inside the cabinet, where the appliance is to be placed, which could hinder a proper installation.
Check that the dimensions of the Downdraft and the ones of the hob are compatible with the
cabinet so that the installation can be carried out properly.
Make a rectangular
opening, 790 x 100mm
in size, at the back of
the hob. In the version
with the motor already
installed, remove
the screws and the
suctioning unit in order
to fit the downdraft in
the opening made.
DIMENSIONS
510mm
785mm
75mm
325mm
200mm
96mm
1.6mm
4mm
140mm
790mm
758mm
810mm
68mm
116mm
100mm
Downdraft cut-out can be
connected to hob cut-out*
Ø150mm
*For electric hobs only. Gas hobs will require a 50mm gap
Instruction manual DD901BK 9
Please keep this instruction manual for future reference
Fit the Downdraft in the opening, by inserting it from above as shown in (Fig. 1).
Secure the downdraft inside the cabinet, by using the special fixing brackets supplied with the
product (Fig. 2). Insert the brackets in the lower side of the downdraft, in such a way that there
is a 3mm gap between the lower side of the bracket and the bottom of the cabinet (Fig. 3).
This distance will allow to pull the appliance downwards during installation, in order to make
the stainless steel frame perfectly adhere with the worktop. Before inserting the screws into the
cabinet, please make sure that the appliance is perfectly perpendicular with the worktop.
After completing installation and connecting the appliance to the power supply, lift the downdraft
up by pressing on the top side, as shown in fig. 4.
Remove the felt protections as shown in fig. 14.
Fig.1 Fig.2 Fig.3
Fig.4 Fig.14
Instruction manual DD901BK
10 Please keep this instruction manual for future reference
If the appliance is used in the recirculation mode, fit the charcoal filters (charcoal filters are not
included and need to be ordered separately) and the grease filters (see fig. 10). Then fit the top
glass by sticking the magnets into the specific seats (see fig. 13).
NOTE: The top glass panel comes packaged separately and will need to be fixed onto the
downdraft during installation.
If the Downdraft is equipped with external motor, place the suctioning unit (external motor) in a
suitable area and fit the exhaust air flue. Then fit the air outlet ducts between the external motor
and the downdraft. Select the air outlet among the five available options (Fig. 6) and fit the spigot
supplied with the appliance.
Place the metal box containing the electronic components in an easily reachable area for possible
technical assistance operations. (Fig.7), by connecting the related connectors (fig. 8A).
Fig.7
Fig.6
Fig.10 Fig.13
Fig.8
Autres manuels pour DD901BK
1
Table des matières
Autres manuels Caple hotte de ventilation
Caple
Caple CGC611 Manuel utilisateur
Caple
Caple DD520BK Manuel utilisateur
Caple
Caple INCHP3 Manuel utilisateur
Caple
Caple DD600SS Manuel utilisateur
Caple
Caple ST852 Manuel utilisateur
Caple
Caple DD810BK Manuel utilisateur
Caple
Caple BXI1050SS Manuel utilisateur
Caple
Caple CGI910 Manuel utilisateur
Caple
Caple TSCH600 Manuel utilisateur
Caple
Caple CGC910BK Manuel utilisateur
Caple
Caple ST851 Manuel utilisateur
Caple
Caple MOT901 Manuel utilisateur
Caple
Caple T60BUCH Manuel de la liste des pièces
Caple
Caple Zi900SS Manuel technique
Caple
Caple ST523 Manuel utilisateur
Caple
Caple DD925CO Manuel utilisateur
Caple
Caple Ceramica CR700W Manuel utilisateur
Caple
Caple DD912BK Manuel utilisateur
Caple
Caple CGC611 Manuel utilisateur
Caple
Caple SIR900 Manuel technique
