Canon PIXMA MX432 Manuel utilisateur

Setup Guide

This guide provides information for setting up a network connection for the printer.

Wireless Connection

Preparation for Connection

Printer Setup

Setup Procedure Selection

Push Button Method

WPS

Troubleshooting

Wireless Connection

aPreparation for Connection

Before Starting Wireless Connection Setup

1. Make sure that the printer is turned on.

If the power is on, the ON button (A) will be lit.

Notes on Wireless Connection

Make sure that the computer is connected to the access point (A) (or wireless network router) you want to connect your

printer to.

The conﬁ guration, router functions, setup procedures and security settings of the network device vary depending on your

system environment. For details, refer to the manual of your network device or contact its manufacturer.

Check if your device supports IEEE802.11n, 802.11g or 802.11b.

If your device is set to the "IEEE802.11 n only" mode, WEP or TKIP cannot be used as a security protocol. Change the

security protocol for your device to something other than WEP and TKIP or change the setting to something other than

"IEEE802.11 n only."

For ofﬁ ce use, consult your network administrator.

Take added care when connecting to a network that is not protected with security measures, as there is a risk of disclosing

data such as your personal information to a third party.

An "Ad-hoc connection," which establishes a direct connection to the computer over a wireless connection without an

access point, is not supported. Be sure to prepare an access point.

bPrinter Setup

1. Press the Setup button (A) on the printer.

2. Use the or button (A) to select Device settings.

3. Press the OK button (B).

•

4. Select LAN settings.

5. Press the OK button.

6. Select Wireless LAN setup.

7. Press the OK button.

The (blue) Wi-Fi lamp (A) lights up when wireless connection is enabled.

The printer will automatically search for access points supporting WPS (Wi-Fi Protected Setup).

cSetup Procedure Selection

Push Button Method → d-A WPS → d-B

d-A Push Button Method

dConnection Using WPS

1. Press and hold the WPS button on the access point (for about 5 seconds).

For details on pressing the WPS button, refer to the access point manual.

2. Press the OK button on the printer within 2 minutes.

The (blue) Wi-Fi lamp on the printer ﬂ ashes while searching for or connecting to the access point.

3. When the left screen appears, press the OK button.

4. Press the COPY button (A).

The network connection setup is now complete.

d-B WPS

dConnection Using WPS

1. Select WPS.

2. Press the OK button.

3. Select Push button method.

4. Press the OK button.

5. Press and hold the WPS button on the access point (for about 5 seconds).

For details on pressing the WPS button, refer to the access point manual.

6. Press the OK button on the printer within 2 minutes.

The (blue) Wi-Fi lamp on the printer ﬂ ashes while searching for or connecting to the access point.

7. When the left screen appears, press the OK button.

8. Press the COPY button (A).

The network connection setup is now complete.

Troubleshooting

WPS

Multiple APs detected

The screen appears when multiple access points are detected. Wait for a while, then conﬁ gure WPS settings again.

Press the WPS button on only one access point.

Failed to connect

The screen appears when an error occurs.

Check the access point settings, then conﬁ gure WPS settings again.

For details on how to check the settings of the access point, refer to the manual supplied with the access point or

contact its manufacturer.

Timeout error

The screen appears when WPS setup was not completed within a speciﬁ ed time.

Complete the setup within the speciﬁ ed time.



Autres manuels pour PIXMA MX432

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Canon Imprimante

Canon

Canon G2000 series Manuel utilisateur

Canon

Canon imagePROGRAF iPF765 Manuel utilisateur

Canon

Canon UFR II Manuel utilisateur

Canon

Canon iR1018 Manuel d'utilisation et d'entretien

Canon

Canon PIXMA iP7200 Series Manuel utilisateur

Canon

Canon MultiPASS L6000 Manuel utilisateur

Canon

Canon Pixma iP4300 Series Manuel utilisateur

Canon

Canon S830D Manuel utilisateur

Canon

Canon BJC-4200 Color Bubble Jet Manuel utilisateur

Canon

Canon i-SENSYS LBP5300 Series Manuel utilisateur

Canon

Canon PIXMA MX700 Series Manuel utilisateur

Canon

Canon PIXMA iX6520 Manuel utilisateur

Canon

Canon imageCLASS MF8450c Guide de sécurité

Canon

Canon Satera LBP3900 Manuel utilisateur

Canon

Canon PIXMA iP2700 Manuel utilisateur

Canon

Canon PIXMA MX521 Manuel utilisateur

Canon

Canon Satera LBP-3910 Manuel utilisateur

Canon

Canon iP6210D - PIXMA Color Inkjet Printer Manuel utilisateur

Canon

Canon PIXMA TS8120 Manuel utilisateur

Canon

Canon imageCLASS MF113w Manuel utilisateur

Canon

Canon imageCLASS MF515x Manuel utilisateur

Canon

Canon Pixma iP110 series Manuel utilisateur

Canon

Canon image Prograf iPF 685 Series Manuel utilisateur

Canon

Canon Laser Shot LBP-5200 Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

IRA3D

IRA3D POETRY4 Manuel utilisateur

Ricoh

Ricoh Aficio AP400 Manuel utilisateur

BIXOLON

BIXOLON SRP-352plusV Manuel utilisateur

Epson

Epson Stylus Photo PX700W Instructions de montage

Ricoh

Ricoh SP204SF Manuel utilisateur

Star Micronics

Star Micronics futurePRNT TSP100 Manuel utilisateur

Epson

Epson TM-TM88V-i Manuel d'utilisation et d'entretien