Canon ImagePROGRAF PRO-6100 Manuel utilisateur

QT6-3114-V01 XXXXXXXX © CANON INC. 2019

QT63114V01

PRINTED IN XXXXXXXX

IMPRIMÉ XX XXXXXXXX

RMC (Regulatory Model Code): K10508

RMC (Regulatory Model Code): K10507

RMC (Regulatory Model Code): K10506

RMC (Regulatory Model Code): K10505

RMC (Regulatory Model Code): K10504

Setup Guide

Read this manual before attempting to operate the printer. Keep this manual for future reference.

Furthermore, in order to ensure that this product is used safely, you should always also read the “Quick Guide (separate

manual)”.

ENGLISH

Guide d’installation

Lisez ce manuel avant d’essayer d’utiliser l’imprimante. Conservez ce manuel pour toute consultation ultérieure.

De plus, an de vous assurer que ce produit est utilisé en toute sécurité, lisez également le “Guide rapide (manuel

distinct)”.

FRANÇAIS

Guia de conguração

Leia este manual antes de tentar operar a impressora. Guarde este manual para referência futura.

Além disso, para garantir que este produto seja usado com segurança, leia também o “Guia rápida (manual separado)”.

PORTUGUÊS

Guía de conguración

Lea este manual antes de intentar operar la impresora. Conserve este manual a mano para futuras referencias.

Además, para garantizar que este producto se utilice de manera segura, siempre debe leer también la “Guía rápida

(manual aparte)”.

ESPAÑOL

Windows is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries.

Overview of Setup Conrming the Installation Space

The illustrations in this manual using the PRO-4100 as an example for explanation. Note that your printer may look diﬀerent from these

illustrations in some cases.

The speciﬁcations and appearance of this product are subject to change without notice.

Set up the printer using the following procedure. Note that if an error

message appears during setup or other problems occur, refer to "Responding

to Messages" on p. 15.

Removing the Packaging Material Page 4

Assembling the Printer Stand Page 4

Attaching the Roll Unit Page 4

Installing the Printer Page 4

Turning On the Printer Page 5

Installing the Ink Tanks Page 6

Installing the Print Head Page 8

Performing Print Head Adjustment Page 10

Selecting the Method of Connecting

to Your Computer Page 12

Installing the Software on Your

Computer Page 13

Loading Paper Page 14

Performing Color Calibration Page 14

Storage Location for Accessories Page 14

Printing From a Smartphone or Tablet Page 14

Displaying the Online Manual Page 14

Responding to Messages Page 15

When installing the printer, it is recommended that you secure the following

space around the printer.

Important

● The printer stand may not be included with the model you purchased.

● The space required in front of the printer varies depending on how the

basket (accessory) is used.

■ PRO-6100 / PRO-6100S

Required space (W x D x H)

94.5 x 66.3 x 61.5 inches

2399 x 1684 x 1560 mm

7.9 inches

(200 mm)

7.9 inches

(200 mm)

23.6 inches

(600 mm)

3.9 inches

(100 mm)

5.9 inches

(150 mm)

■ PRO-4100 / PRO-4100S

Required space (W x D x H)

78.5 x 66.3 x 61.5 inches

1993 x 1684 x 1560 mm

7.9 inches

(200 mm) 7.9 inches

(200 mm)

23.6 inches

(600 mm)

3.9 inches

(100 mm)

5.9 inches

(150 mm)

■ PRO-2100

Required space** (W x D x H)

59.5 x 56.5 x 40.2 inches

1510 x 1434 x 1020 mm

Required space* (W x D x H)

59.5 x 66.3 x 61.5 inches

1510 x 1684 x 1560 mm

3.9 inches

(100 mm)**

3.9 inches

(100 mm)*

23.6 inches

(600 mm)*

5.9 inches

(150 mm)

7.9 inches

(200 mm)

7.9 inches

(200 mm)

23.6 inches

(600 mm)**

* When using the SD-21 printer stand

** When not using the printer stand

ENGLISH

Checking the Package Contents

Check that the following included accessories are contained in the package. Note that a cable to connect the printer to a computer is not provided with the

printer.

Note

● Although the included accessories also contain items that are not explained in this manual, you should store them without losing any since they will be

required when using various functions.

● For instructions on the included items not described in this manual, refer to the Online Manual by following the instructions in "Displaying the Online Manual"

on p. 14.

nop

*1 Only included with models where the printer stand is included as standard. Note that it may be packaged in a separate box depending on the region

where you purchased the printer.

The items included with the printer stand are described in the Printer Stand Setup Guide.

*2 The included ink tanks for initial installation diﬀer depending on the model.

PRO-2100, PRO-4100, PRO-6100: MBK, PBK, C, M, Y, PC, PM, R, CO, B, GY, PGY

PRO-4100S, PRO-6100S: MBK, PBK, C, M, Y, PC, PM, GY

*3 These items might not be included depending on your region.

*4 This is used when loading roll paper. For details, refer to the Online Manual.

Manuals Included with This Product

Setup Guide (this manual)

Describes how to setup the printer.

Printer Stand Setup Guide

Describes how to assemble the stand. This may not be included depending on your region and selected purchase options.

Quick Guide

Contains information related to warnings for using this product safely and information related to replacing paper, ink tanks, and the print head.

Online Manual (Electronic Manuals)

The Online Manual describes all aspects of printer use from basic instructions for printing on roll or cut sheet paper, to tips for saving paper and maintaining the

best printing quality. It also describes how to print posters and banners from the supplied software. To view the Online Manual, refer to "Displaying the Online

Manual" (p. 14).

aPrinter

bBasket rod / Basket cloth *1

cPaper for print head adjustment

dSetup Guide (this manual)

eStarter ink tanks *2

fSet of CD-ROMs

gSet of printer documentation

hPower cord

iRod holder (2 pieces) *1

jPrint head

kStand leg (2 pieces) *1

lStand stay *1

mBasket arm (2 pieces) *1

nBasket locking support (2 pieces) *3

o3-inch paper core attachment (2 pieces)

pPrinter stand mounting bracket set *1

qAccessory pocket

rHolder stopper *4

sRoll Unit

Provided as an optional accessory.

Refer to the included setup guides for details on the

products included in the boxes.

Handling Cautions

Moving the Printer Standing Up the Printer Other

● Firmly grasp the carrying handles on each side

in the base (the area shown shaded in the

diagram). Holding the printer at other positions

is dangerous and may cause injury and damage

if the printer is dropped.

● When standing up the printer, hold the metal

parts of the printer. If you hold a plastic part, the

printer may become damaged.

● Do not put the printer down or carry the printer

with only the center of the printer supported.

This may cause damage to the printer.

● Have the following number of people grasp the

carrying handles on each side in the base of the

printer. The weight may cause pain such as back

pain.

• PRO-6100 Approx. 273 lb (124 kg)

6 people or more

• PRO-6100S Approx. 268 lb (122 kg)

6 people or more

• PRO-4100 Approx. 233 lb (106 kg)

6 people or more

• PRO-4100S Approx. 229 lb (104 kg)

6 people or more

• PRO-2100 Approx. 187 lb (85 kg)

6 people or more

For the PRO-6100

● When standing the printer up, place cardboard

or other material underneath to prevent

damage and scratching, and make sure the side

with the operation panel is up. Furthermore,

make sure that the weight of the printer is taken

by the corner of the printer. If the weight is

taken by any other part of the printer, the printer

may become damaged.

● When setting the printer down temporarily,

make sure to put the printer on a ﬂat, stable

surface.

Installing the Printer

If you are not using the stand, install the printer in a location like the following.

Assembling the Printer Stand

Assemble the stand by referring to the Printer Stand Setup Guide (separate manual). If you are

not using the stand, proceed to "

Installing the Printer".

Attaching the Roll Unit

If you purchased the optional roll unit, attach the roll unit by referring to the Roll Unit Setup

Guide (separate manual). If you are not using the roll unit, proceed to "

Installing the Printer".

Removing the Packaging Material

Lift up the printer.

● For details on how to carry and the number of people, refer to

"Handling Cautions" (p. 3).

Place the printer on a stable at location.

Remove the packaging material.

Remove all of the tape and other packaging material.

Remove the tape axed to the roll holder.

Turning On the Printer

Open the top cover.

Pull up and remove the belt stopper.

● Keep the belt stopper for future use. You will need it in case you

move the printer to another location.

Remove the tape and protective material.

● Peel oﬀ the tape aﬃxed to the carriage, and then pull the

protective material (the area shown shaded in the diagram)

towards you and remove it. Remove the protective sheet if there

is one attached.

Close the top cover.

Connect the power cord to the printer.

● Insert the power cord into the power connector on the rear of the printer.

For the PRO-2100 For the PRO-4100 / PRO-4100S / PRO-6100 / PRO-6100S

Plug the power cord into the outlet,

and then turn on the printer.

When the language selection screen

appears on the touch screen, select

and tap a language (lightly with

your nger, and then move your

nger away). Then, if the screen for

selecting a time zone appears, select

and tap your region.

When a message prompting you to

start the setup appears on the touch

screen, tap OK.

Installing the Ink Tanks

Instructions on ink tank installation are shown on the touch screen. Install the ink tanks as instructed. The PRO-2100 / PRO-4100 / PRO-6100 require 12 ink tanks

while the PRO-4100S / PRO-6100S require 8 ink tanks. If the ink tank is cold, allow it to adjust to room temperature before attaching it to the printer.

Open the ink tank covers.

Pull the ink tank lock lever towards

you.

● Hook your ﬁnger into the knob (A)

on the back of the handle and pull it

towards you.

With it in this state, pull the ink tank

lock lever up.

Continue pulling until the entire ink tank lock lever is

tilted towards you.

● Make sure the ink tank lock lever stays in the locked position.

Shake each ink tank gently 7 or 8 times before opening its

pouch.

Important

● Failure to shake the ink tanks may

result in reduced print quality

because ink ingredients have settled

on the bottom of the tank.

Open the pouch and remove the ink tank.

Important

● Never touch the ink holes or metal contacts (the area shown shaded in the diagram).

Touching these parts may cause stains, damage the ink tank, and aﬀect print quality.

● Avoid dropping the ink tank after removing it from the pouch.

Otherwise, ink may leak and cause stains.

● Do not remove ink tanks to shake them after they have been mounted.

Doing so may cause ink to spill.

Check that the color of the ink tank is the same as the color displayed on the label in the printer, and insert the ink tank into

the holder in the orientation shown in the diagram.

● Insert with the ink tank label facing up and ensuring that the text on the label is not upside-down.

Match the color of the ink tank label

to the color of the label in the printer

Lift up the ink tank lock lever once and then push it

down.

Firmly push down the handle part of the ink tank lock

lever all the way in.

Make sure the ink lamp lights red.

Important

● If the ink lamp does not light, repeat steps 2 to 4and 8to 9.

Repeat steps 2 to 10 to install each of the ink tanks.

Close the ink tank covers.

Installing the Print Head

Instructions are now shown on the touch screen regarding print head installation. Install the print head by following the instructions.

Open the top cover.

Important

● Do not move the carriage (the area enclosed by a circle in the

diagram). If you accidentally move it, temporarily close the top

cover and it will return to its original position.

Tilt the print head lock lever towards you.

● While pushing the button in the center of the lever, tilt the

lever towards you. Remove the protective sheet if there is one

attached.

Open the print head locking cover.

Do not touch here with your hands

Grasp the print head as shown in the diagram and

remove it from the bag.

Remove the 2 orange protective caps.

● Keep holding the print head in your hand while you work.

Important

● The print head is ﬁlled with ink. Be careful to avoid getting your clothes and surrounding items dirty when removing the

protective caps.

● Do not touch anywhere other than the handles. In particular, do not touch the part that was being protected by the

protective cap (part shown shaded in the diagram) under any circumstances. Touching it may cause damage to the print head

or printing problems.

● Do not reattach the protective caps after removing them. Furthermore, dispose of them according to local regulations.

Install the print head.

● Align the print head so that the area enclosed by a circle in the

diagram is facing you, and carefully push the print head ﬁrmly

into the printer, ensuring that the part covered by the protective

caps does not touch the carriage.

Pull the print head locking cover down toward you to lock

the print head in place.

Push the print head lock lever all the way to the end.

● Push ﬁrmly until you hear a click sound.

Close the top cover.

Note

● If the roll unit is installed, the roll unit calibration starts automatically

after the print head is attached.

If the roll holder is mounted on the roll unit at this time,

calibration cannot be executed. Do not mount the roll holder on

the roll unit until the setup has ﬁnished.

Autres manuels pour imagePROGRAF PRO-6100

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels Canon Imprimante

Canon

Canon imageRUNNER C3170 series Manuel utilisateur

Canon

Canon MG3560 Guide de configuration

Canon

Canon IMAGERUNNER ADVANCE C5051 Manuel utilisateur

Canon

Canon imageCLASS MF756Cx Manuel utilisateur

Canon

Canon LBP-1000 Manuel utilisateur

Canon

Canon PIXMA MX310 series Manuel utilisateur

Canon

Canon PowerShot A480 Manuel

Canon

Canon PIXMA TS6050 Guide de configuration

Canon

Canon PIXMA MP760 Manuel utilisateur

Canon

Canon PIXMA MP520 Manuel utilisateur

Canon

Canon imagePROGRAF iPF8300 Manuel utilisateur

Canon

Canon PowerShot S400 Digital Elph Manuel utilisateur

Canon

Canon PIXMA MP510 Manuel utilisateur

Canon

Canon imageRUNNER ADVANCE DX C478iZ Guide d'installation

Canon

Canon ImageRUNNER C1538iF Manuel utilisateur

Canon

Canon imageCLASS MF419dw Manuel utilisateur

Canon

Canon LASER SHOT LBP-3600 Manuel utilisateur

Canon

Canon PIXMA MX860 series Manuel utilisateur

Canon

Canon imagePress C910 Manuel technique

Canon

Canon S800 Manuel utilisateur

Canon

Canon C2050 Comment utiliser

Canon

Canon Color Bubble Jet BJC-8200 Manuel utilisateur

Canon

Canon imageRUNNER 2545i Manuel utilisateur

Canon

Canon BJC-3000 Series Manuel

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

IRA3D

IRA3D POETRY4 Manuel utilisateur

Ricoh

Ricoh Aficio AP400 Manuel utilisateur

BIXOLON

BIXOLON SRP-352plusV Manuel utilisateur

Epson

Epson Stylus Photo PX700W Instructions de montage

Ricoh

Ricoh SP204SF Manuel utilisateur

Star Micronics

Star Micronics futurePRNT TSP100 Manuel utilisateur

Epson

Epson TM-TM88V-i Manuel d'utilisation et d'entretien

Canon imagePROGRAF PRO-6100 Manuel utilisateur

Manuels Imprimante populaires d'autres marques