Canon IPF710 - imagePROGRAF Color Inkjet Printer Manuel utilisateur

1 Safety Precautions

Safety Precautions .............................................2

3 Basic Operations

Turning the Printer On and Off ...........................8

Loading a Roll ................................................... 11

Loading Sheets Manually .................................18

Printing from Windows ......................................22

Printing from Mac OS X ....................................25

Printing from Mac OS 9 ....................................28

4 Maintenance

Replacing Ink Tanks .........................................31

Cleaning the Printer ..........................................38

Checking for Nozzle Clogging ..........................43

Cleaning the Printhead .....................................44

Adjusting the Printhead Alignment Automatically

..45

Adjusting the Feed Amount Automatically ........47

5 Troubleshooting

Responding to Messages .................................48

Troubleshooting If You Cannot Print .................60

Troubleshooting If You Cannot Print as Expected

..64

Clearing Jammed Roll Paper ............................73

Clearing a Jammed Sheet ................................78

6 Consumables

Consumables ....................................................81

7 Appendix

Index .................................................................83

ENG

2 imagePROGRAF Support

Information

imagePROGRAF Support Information ...............6

Read this manual before attempting to operate the printer.

Keep this manual in a handy location for future referencing.

Safety Precautions

Follow the warnings and precautions below to use the printer safely. Do not perform any

operations or procedures other than as described in this manual. Doing so may result in

unexpected accidents and can cause a ﬁre or electrical shocks.

█Printer location

•Do not set up the printer in any location exposed to alcohol, thinner, or other volatile liquids.

If these substances come into contact with electrical components inside the printer, there

is a risk of ﬁre or electrical shock.

█Power Supply

•Never handle the power cable with wet hands. Doing so may cause electrical shock.

•Insert the power cable securely and completely into the power source. If the power cable is not

inserted completely, this could cause a ﬁre or electrical shock.

•Do not use any power cable other than the one provided. This could cause a ﬁre or electrical

shock. Never use the power cable with any other electrical device.

•Never cut the power cable or attempt to modify it, and never stretch it or bend it forcefully.

Never place a heavy object on the power cable. Damaged sections of the power cable could

cause a short circuit and may cause a ﬁre or electrical shock.

•Never connect the power cable to a power strip or any power source shared by other electrical

devices. This could cause a ﬁre or electrical shock.

•Never knot the power cable or wrap it around itself. This could cause a ﬁre or electrical shock.

•Periodically disconnect the power cable and use a dry cloth to wipe away dust that has

collected on the plug and the area around the power outlet. Leaving the power cable plugged in

and not cleaned for a long period, especially in an area subject to dust, oil, and humidity, could

cause the insulation material to deteriorate and lead to a ﬁre.

Safety Precautions

█In an Emergency

•If the printer emits smoke or strange odors, continuing to use the printer may cause a ﬁre or

electrical shock. Switch the printer off immediately and remove the power plug from the power

outlet. Contact the nearest service center.

█Cleaning the Printer

•For cleaning, use a cloth dampened in water. Never use ﬂammable solvents such as alcohol,

benzene, or thinner. If these substances come into contact with electrical components inside

the printer, there is a risk of ﬁre or electrical shock.

█Pacemakers

•This printer generates a low-level magnetic ﬁeld. Anyone wearing a pacemaker who

experiences discomfort while working around the printer should leave the area. Consult a

physician before continuing to work around theprinter.

█Printer location

•Never install the printer on an unstable or vibrating surface. If it falls over, this could cause

personal injury.

•Never set up the printer in a location that is exposed to high humidity or large amounts of dust,

or exposed to direct sunlight, high temperature, or open ﬂame. This could cause a ﬁre or

electrical shock. Use the printer location in an environment where temperature and humidity

are within the ranges of 15 Degrees C to 30 Degrees C (59 Degrees F to 86Degrees F) and 10

to 80% RH (with no condensation).

•Never place the printer on a heavy wool or shag carpet. The ﬁbers may enter the printer

and cause a ﬁre.

•Keep the area around the power outlet clear of items so that you can disconnect the power

cable immediately if the printer starts operating abnormally. In the event of a printer malfunction,

remove the power cable from the outlet as soon as possible to prevent ﬁre and electrical shocks.

•Do not install the printer near sources of strong electromagnetic ﬁelds, whether equipment

that generates such ﬁelds or places where such ﬁelds occur. This could damage the printer

or cause malfunction.

█Moving the Printer

•The weights of main printer units are as follows:

•iPF710: 64 Kg

Moving the printer requires at least three people, one person on each side of the unit. Be

careful to avoid back strain and other injuries.

•When moving the printer, ﬁrmly grasp the Carrying handles located on the bottom surface at

both sides. Holding the printer at other positions is dangerous and poses a risk of injury and

damage if the printer is dropped.

Safety Precautions

█Power Supply

•Always grip the plug to remove the power cable from the power outlet. Pulling on the power

cable could damage the cable and lead to a ﬁre or electrical shock.

•Never use an extension cord. This could cause a ﬁre or electrical shock.

•Never use any power source other than AC 100–120 / 220–240 V. This could cause a ﬁre or

electrical shock. The printer operating conditions are described below. Use the printer under

the following conditions.

Power supply voltage: AC 100–120 / 220–240 V

Power supply frequency: 50/60Hz

█Cleaning the Printer

•Always disconnect the power cable from the outlet before cleaning the printer. If the printer is

switched on accidentally, moving parts inside the printer may cause personal injuries.

█Printhead,Ink Tanks and Maintenance Cartridge

•Always store consumables in a safe location out of the reach of small children. If a child licks or

ingests ink accidentally, seek medical assistance immediately.

•Avoid dropping or shaking Printheads ,Ink Tanks , and Maintenance Cartridges . Spilled ink

can stain clothing and the work area.

•Never touch the electrical contacts of the Printhead after printing. The contacts become

extremely hot and can cause minor burns.

█Other

•Never disassemble the printer or attempt repairs. There are high voltage parts inside the

printer that can cause a ﬁre or electrical shock.

•Never use ﬂammable sprays around the printer. The gas of ﬂammable sprays can cause a ﬁre

or electrical shock, if it contacts high voltage points inside the printer.

Safety Precautions

•Never insert your hand into the printer while it is printing. Moving parts inside the printer can

cause injuries.

•Never place anything on the printer such as small metal objects (paper clips, staples), liquids,

any type of liquid container that contains ﬂammable liquids (alcohol, benzene, etc.). If such

objects fall into the printer, this could cause a ﬁre or electrical shock.

•After removing the Cutter Unit, never touch the cutting edge. This could cause personal injury.

•To prevent a ﬁre hazard or dangerous electric shock, if a foreign object falls into or a liquid spills

into the printer, press the Power button immediately to switch the printer off, unplug the printer

power cable from the outlet, and then call for service. If you continue to use the printer, this

couldcauseaﬁre or electrical shock.

•Connect the interface cable correctly. To avoid damage, before connection make sure that the

shape of the cable connector matches the connection point on the printer.

•Do not block the vents on the top and right side of the unit while the printer is on.

•Avoid placing papers or other light objects near the right-side vent.

•Trademarks

Canon, the Canon logo, and imagePROGRAF are trademarks or registered trademarks of

CANON INC.

Microsoft and Windows are trademarks of Microsoft Corporation, registered in the U.S.

and other countries.

Macintosh is trademark of Apple Inc., registered in the U.S. and other countries.

All other trademarks or registered trademarks described in this Reference Guide are the

property of their respective owners.

•Cross-reference

Cross-references are given in the following format.

Information in the Reference Guide (→P.xx)

Information in the User Manual (→"xx," User Manual)

•Legal Notice

•It is illegal to reproduce currency, bills, negotiable securities and other documents

prohibited by law. Reproduction of such items may be subject to criminal prosecution.

•It is illegal to reproduce legal certiﬁcates, licenses, travel tickets, and certain public and

private documents prohibited from reproductionbylaw. Reproductionofsuchitems

may be subject to criminal prosecution.

•Please note that intellectual property protected by copyright may not be reproduced

without the express permission of the copyright holder except for personal or household

use under limited circumstances.

imagePROGRAF Support Information

imagePROGRAF Support Information is automatically installed on your computer when

you install the printer driver.

You can access the imagePROGRAF Support Information as follows. Follow the steps

for your particular operating system.

•Windows

Double-click the iPF710 Support Support icon on the desktop.

•Mac OS X

Click the iPF Support icon in the Dock.

Note

•imagePROGRAF Support Information is not compatible with Mac OS 9.

To view the User Manual or Paper Reference Guide in Mac OS 9, double-click the

iPF710 Manual or iPF710 Paper Reference Guide icons on the desktop.

imagePROGRAF Support Information

You can access the following useful information in imagePROGRAF Support Information

when using the printer.

•User Manual

The User Manual contains detailed printer instructions, troubleshooting tips, and other

information.

•Paper Reference Guide

The Paper Reference Guide identiﬁes types and speciﬁcations of paper you can use

in the printer.

•Stay Informed

Visit the imagePROGRAF website for news and printing tips.

Turning the Printer On and Off

Turning the printer on

1Press the Power button to turn on the printer.

The printer will now start up.

After the Display Screen shows the Canon logo, Starting up... Please wait. is

displayed.

2The printer goes online in preparation for printing after startup, and the Online lamp

and paper source section lamp remain lit.

The printer will not go online in the following situations. Take action as needed.

•The Top Cover is open

Close the Top Cover.

•The Ink Tank Cover is open

Close the InkTankCover.

•The Printhead is not installed

Install the Printhead. (→"Replacing the Printhead," User Manual)

•InkTankisnotinstalled

Install the InkTanks. (→P.31)

Turning the Printer On and Off

•If "!ERROR" is shown on the Display Screen

Turn off the printer and contact your Canon dealer.

•The Online lamp and Message lamp are not lit (even once), and

nothing appears on the Display Screen

Make sure the printer is plugged in correctly. Check the connection at the plug and

electrical outlet.

•No paper is loaded

Load paper.

Important

•Starting the printer when it is connected via the USB cable to a Macintosh computer that

is off may cause the computer to start up at the same time. To prevent this, disconnect

the USB cable before starting the printer. Connecting the printer to the computer via a

USB hub may solve this issue.

Turning the Printer On and Off

Turning the printer off

Important

•Never turn the printer off or unplug it during a print job. This could damage the

printer.

1Make sure no print jobs are in progress.

If the Message lamp is ﬂashing, check the message on the Display Screen and take

action as necessary.(→P.48)

If the Data lamp is ﬂashing, the printer is receiving a print job. Turn off the printer

only after printing is ﬁnished.

2Hold down the Power button for more than a second.

After Shut Down.. Please Wait.. isshownontheDisplay Screen, the printer

shuts off.

Autres manuels pour iPF710 - imagePROGRAF Color Inkjet Printer

Table des matières

Autres manuels Canon Imprimante

Canon

Canon imageRUNNER 1750i Manuel utilisateur

Canon

Canon PIXMA iP7200 Series Manuel utilisateur

Canon

Canon iP1900 Series Guide de l'utilisateur

Canon

Canon MG2900 Series Manuel utilisateur

Canon

Canon PIXMA MX420 Series Instructions d'utilisation

Canon

Canon PIXMA iP4920 Manuel utilisateur

Canon

Canon PIXMA MP568 Manuel utilisateur

Canon

Canon iP5000 - PIXMA Color Inkjet Printer Mode d’emploi

Canon

Canon imageCLASS D600s Manuel utilisateur

Canon

Canon G3560 Series Guide de configuration

Canon

Canon MAXIFY iB4020 Instructions d'installation et d'entretien

Canon

Canon BJC-55 Series Manuel utilisateur

Canon

Canon PIXMA iP2850 Guide de configuration

Canon

Canon PIXMA PRO-200 Manuel utilisateur

Canon

Canon Pixma MG3500 Series Guide de configuration

Canon

Canon iX7000 Series Manuel utilisateur

Canon

Canon PIXMA iP7220 Series Manuel utilisateur

Canon

Canon PIXMA IP5300 Manuel utilisateur

Canon

Canon iR 2525 Manuel utilisateur

Canon

Canon PIXMA MG5220 Series Manuel utilisateur

Canon

Canon imageRUNNER ADVANCE 400iF Guide de sécurité

Canon

Canon imagePROGRAF iPF9400S Manuel utilisateur

Canon

Canon iP4200 - PIXMA Photo Printer Manuel utilisateur

Canon

Canon PIXMA Pro9000 Mark II Series Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

IRA3D

IRA3D POETRY4 Manuel utilisateur

Ricoh

Ricoh Aficio AP400 Manuel utilisateur

BIXOLON

BIXOLON SRP-352plusV Manuel utilisateur

Epson

Epson Stylus Photo PX700W Instructions de montage

Ricoh

Ricoh SP204SF Manuel utilisateur

Star Micronics

Star Micronics futurePRNT TSP100 Manuel utilisateur

Epson

Epson TM-TM88V-i Manuel d'utilisation et d'entretien

Canon iPF710 - imagePROGRAF Color Inkjet Printer Manuel utilisateur

Manuels Imprimante populaires d'autres marques