Canon EOS 5D MARK IV Manuel utilisateur
EOS 5D Mark IV (WG)
© CANON INC. 2017
Canon Log
Instruction Manual
●This manual applies to the EOS 5D Mark IV which has been upgraded for
compatibility with Canon Log.
●This manual explains only the features relevant to Canon Log. For other features, refer
to the EOS 5D Mark IV Instruction Manual.
●When using an HDMI cable (sold separately), using a cable protector is recommended.
CEL-SX2JA210 ENGLISH
Setting the Canon Log
Canon Log is a gamma characteristic for post-production. It maximises the image sensor’s
characteristics and attains a wide dynamic range for movie shooting. It reduces loss of
shadow and highlights details, and the tonal information from the shadows to highlights
can be incorporated in the movie.
During post-production, a lookup table (LUT) can be applied to movies shot with Canon
Log. Download the LUT data from the Canon website www.canon.com/icpd.
1 Set the Mode Dial to <a>.
●If the shooting mode is <A> <d> <s> <f>
<F>, Canon Log setting discribed in step 3 cannot be
performed.
2
Set the Live View shooting/Movie shooting
switch to <k>.
►The Live View image will appear on the LCD monitor.
3 Select [Canon Log settings].
●Press the <M> button.
●Under the [z5] tab, select [Canon Log settings],
then press <0>.
4
Select [Canon Log].
●Press <0>.
5 Select [On].
●Turn the <5> dial to select [On], then press <0>.
►Canon Log will be set.
2
Setting the Canon Log
6
Set the shooting function.
●Set the ISO speed manually.
●Set the shutter speed and aperture.
Shooting Function Settings
●Shooting with ISO Auto is not possible. (When Canon log is set with ISO Auto setting,
ISO 400 will apply.)
●If the ISO speed is manually set to ISO 100 – ISO 320, the dynamic range will become
narrower.
●When Canon Log is set, dynamic range will be approx. 800% at ISO 400 or higher.
●AF shooting is possible even when Canon Log is set. However, when shooting with
Canon Log, achieving focus with AF on a subject under low-light or with low contrast
may become more difcult than in normal shooting.
●When shooting 4K movies with Canon Log setting, [Peripheral illumin.] under [z1:
Lens aberration correction] cannot be set (does not function).
●Canon Log can also be set for high frame rate movie shooting.
●Canon Log settings can be registered under Custom Shooting Modes (C1/C2/C3).
3
Setting the Canon Log
7 Adjust the Canon Log movie characteristics.
●Adjust as necessary.
●Turn the <5> dial to select a parameter ([Sharpness:
Strength], [Saturation], [Hue]), then press <0>.
●Turn the <5> dial to set the parameter, then press
<0>.
Sharpness: Strength 0: Outline sharpening: Weak 7: Outline sharpening: Strong
Saturation -4: Low +4: High
Hue*
Red -4: Magenta-biased +4: Yellow-biased
Green -4: Yellow-biased +4: Cyan-biased
Blue -4: Cyan-biased +4: Magenta-biased
* Red, green, and blue cannot be adjusted individually.
Image Quality with Canon Log
●When Canon Log is set, horizontal noise stripes may appear in movies depending
on subject or shooting conditions. It is recommended to shoot a few test movies
and check before the actual shooting. Note that noise may become more noticeable
especially when you apply strong contrast during color grading of the shot movie.
●When Canon Log is set, the color gradation of the sky or white walls may not be
reproduced correctly. Irregular colors, irregular exposure or noise may appear.
●When the noise is noticeable, it is recommended to set [Peripheral illumin.] under
[z1: Lens aberration correction] to [Disable], shoot in brighter exposure, and
perform brightness adjustment during color grading.
4
Setting the Canon Log
8
Set the View Assist.
●Set it as necessary.
●Turn the <5> dial to select [View Assist.], then press
<0>.
●Turn the <5> dial to select [On], then press <0>.
►The image is displayed with View Assist when you
shoot a movie.
View Assist
●Canon Log is a movie characteristic to attain wide dynamic range. As a result, the
image displayed on the LCD monitor has low contrast and is somewhat dark compared
to when a Picture Style is set.
●With [View Assist.] set to [On], the movie image will be displayed on the LCD monitor
with a clear-viewing characteristic. This makes it easier to check the image details,
etc.
●Note that even if [View Assist.] is set to [On], it will not affect the movie recorded to
the card. (The movie will be recorded to the card with Canon Log characteristics.)
●With [View Assist.] set to [Off], the movie image is displayed with the Canon Log
characteristic on the camera’s LCD monitor or also in EOS Utility (EOS software).
●Even if [View Assist.] is set to [On], the HDMI output movie image will be output with
the Canon Log characteristic.
●If [View Assist.] is set to [On], a magnied display will also be displayed with the View
Assist.
9
Shoot the movie.
●In the EOS 5D Mark IV Instruction Manual, refer to
pages 334–343 before shooting a movie.
5
Setting the Canon Log
Movie Shooting Information Display
When [Peripheral illumin.] under [z1: Lens aberration correction] is set to [Enable],
“C.LOG” icon on the information display screen blinks since noise may appear in the movie
image periphery. (However, since [Peripheral illumin.] cannot be set (does not function) during
4K movie shooting, “C.LOG” icon will not blink.)
●Canon Log gamma (Sharpness: Strength, Saturation, and Hue) is reected in the Final
image simulation during movie shooting (with View Assist not applied).
●When the LCD monitor displays the image with View Assist, [ ] will appear on the movie
shooting information display screen. However, [ ] is displayed in grey under the shooting
conditions where the images are not displayed with the View Assist.
General Cautions for Canon Log Shooting
●If you set Canon Log, the following cannot be set (will not function) for movie shooting:
Picture Style, Auto Lighting Optimizer, highlight tone priority, time-lapse movie, and HDR
movie.
●Not compatible with Canon Log 2 and Canon Log 3.
●Executing [55: Clear all camera settings] will set [z5: Canon Log settings] to [Off].
Canon Log View Assist
6
Setting the Canon Log
Information Display During Playback
●If you play back a movie shot with Canon Log and “Detailed information” (refer to
page 398 in the EOS 5D Mark IV Instruction Manual) is displayed, the following will
be displayed:
●The Picture Style information 1 and Picture Style information 2 screens shown on
page 399 in the EOS 5D Mark IV Instruction Manual will change as follows:
• Canon Log information 1 • Canon Log information 2
Canon Log Settings
(Sharpness: Strength, Saturation, Hue)
7
Setting the Canon Log
Playing Back a Movie Shot with Canon Log
●View Assist is not applied during movie playback.
●A movie shot with Canon Log cannot be played back by an EOS camera without
Canon Log incorporated or by an EOS 5D Mark IV whose rmware has not been
upgraded to the version compatible with Canon Log.
Using EOS Software/Applications
●Movies can be shot with a computer installed with EOS Utility. However, EOS Utility
cannot be used to set Canon Log. Use the camera to set Canon Log.
●Although this camera is compatible with the Canon Log features of the EOS software
EOS Utility and EOS MOVIE Utility, there are no descriptions on the Canon Log
features in either the EOS Utility or EOS MOVIE Utility Instruction Manuals. Refer
to the descriptions for the Canon Log features on the “Cinema EOS-1D C” in the
EOS Utility and EOS MOVIE Utility Instruction Manuals before using the Canon Log.
Manuals can be downloaded from: www.canon.com/icpd.
●To use the Canon Log features of the EOS Utility or EOS MOVIE Utility with this
camera, rst download the latest versions of the software from the Canon website,
then install them on your computer.
Note that the EOS Utility installed in the EOS Solution Disk (CD-ROM) is not compatible
with this camera’s function that supports the Canon Log features.
●EOS MOVIE Utility supports the MOV movies shot with the compatible camera
models. (MP4 movies are not supported.)
8
Autres manuels pour EOS 5D MARK IV
2
Table des matières
Autres manuels Canon Appareil photo numérique
Canon
Canon EOS 6D Guide d'installation
Canon
Canon Power Shot SD30 Manuel d'utilisation et d'entretien
Canon
Canon PowerShot SD630 Digital ELPH Camera Manuel utilisateur
Canon
Canon Pixma Pro 9500 Mark II series Manuel utilisateur
Canon
Canon 450D Manuel utilisateur
Canon
Canon PowerShot SX100 IS Manuel utilisateur
Canon
Canon PowerShot SX130 IS Manuel utilisateur
Canon
Canon EOS REBEL K2 3000V DATE Manuel utilisateur
Canon
Canon IXUS 115 HS Manuel utilisateur
Canon
Canon Speedlite 277T Manuel utilisateur
Canon
Canon EOS 7D Mark II (G) Manuel utilisateur
Canon
Canon F-1 Manuel utilisateur
Canon
Canon EOS REBEL Ti 300V Date Manuel utilisateur
Canon
Canon Ixus 240 hs Manuel utilisateur
Canon
Canon EOS-1D C Manuel utilisateur
Canon
Canon PowerShot A30 Manuel utilisateur
Canon
Canon PowerShot S100 DIGITAL ELPH Manuel utilisateur
Canon
Canon PowerShot SX620 HS Manuel utilisateur
Canon
Canon Powershot S80 Mode d’emploi
Canon
Canon PowerShot ZOOM Instructions de montage
