Canon REBEL SL1 EOS 100D Manuel utilisateur
CaHOH
,,,_i_i!i_i_i_iiiii!ii!i!ii!_;ii_i!i!i_i_ilii_ ,_,_ili_i_iiii_!i!i_!_!i_i_Ji!_i_i_iiiii_iiii_
Customizing the
Camera
You can customize various camera functions to suit
your picture-taking preferences with Custom Functions.
Custom Functions can be set and used only in Creative
Zone modes.
Setting Custom Functions _"
......iii i!ii
Select [Custom Functions (C.Fn)].
Underthe[t'4] tab, select[Custom
Functions (C.Fn)], thenpress
<SET>.
Custom Function number Select the Custom Function
number.
Press the <<> <1_> keys to select
the Custom Function number, then
press <SET>.
,iiii!!ii!!!!ii iiiii
Change the setting as desired.
Press the <A> <¥> keys to select
the desired setting (number), then
press <SET>.
Repeat steps 2 and 3 if you want to
set other Custom Functions.
At the bottom of the screen, the
current Custom Function settings are
indicated below the respective
function numbers.
Exit the setting.
Press the <MENU > button.
The screen for step 1 will reappear.
Under [_,4: Clear settings], select [Clear all Custom Func. (C.Fn)] to
clear all the Custom Function settings (p.227).
298
Setting Custom Functions*
C.Fn I: Exposure
1 Exposure level increments O
p.3O0
2 ISO expansion O
'_Movie
Shooting
O
In M
C,Fn I1: Image
I3IHighlighttonepriority Ip30111o I
C,Fn II1: Autofocus/Drive o(With
4 AF-assist beam firing p.302 AFQuick*)
5 Mirror Iockup
* If you use an EX-series Speedlite (sold separately) equipped with an LED light,
the LED light will turn on for AF-assist even in the AF_:_ AF(), and AFu modes.
C.Fn IV: Operation/Others
6 Shutter/AE lock button p.303 O
O O
7 Assign SET button p.304 (Except 3) (Except2, 3)*
8 LCD display when power ON
* [5: ISO speed] is settable only for manual exposure shooting.
[_ The shaded Custom Functions do not function during Live View (LV)
shooting or movie shooting. (Settings are disabled.)
299
Custom Function Settings _
Custom Functions are organized into four groups based on the function
type: C.Fn I: Exposure, C.Fn I1:Image, C.Fn II1:Autofocus/Drive, C.Fn
IV: Operation/Others.
0: 1/3-stop
1: 1/2-stop
Sets 1/2-stop increments for the shutter speed, aperture, exposure
compensation, AEB, flash exposure compensation, etc. This is
effective when you prefer to control the exposure in less fine
increments than 1/3-stop increments.
J_ With setting 1,the exposurelevel will bedisplayed inthe viewfinder and on
the LCD monitor as shown below.
=@ =,p_= o=
0: Off
1: On
When you set the ISO speed, you will be able to set "H"
(equivalent to ISO 25600) for still photos and "H" (equivalent to
ISO 12800) for movies. Note that if [C.Fn-3: Highlight tone
priority] is set to [1: Enable], "H" cannot be set.
300
Custom Function Settings *
0: Disable
1:Enable
Improves the highlight detail. The dynamic range is expanded from
the standard 18% gray to bright highlights. The gradation between
the grays and highlights becomes smoother.
, With setting 1,the Auto Lighting Optimizer (p.130) is automatically set to
[Disable] and the setting cannot be changed.
With setting 1, noise (grainy image, banding, etc.) may become slightly
more pronounced than with setting 0.
[_] With setting 1, the settable range will be ISO 200 - ISO 12800 (up to ISO
6400 for movies).
Also, the <D+> icon will be displayed on the LCD monitor and in the
viewfinder when highlight tone priority is enabled.
301
Custom Function Settings*
Enables or disables the built-in flash's AF-assist beam or the EOS-
dedicated external Speedlite's AF-assist beam.
0: Enable
The AF-assist beam will be emitted when necessary.
1: Disable
The AF-assist beam is not emitted. This prevents the AF-assist
beam from disturbing others.
2: Enable external flash only
If an external Speedlite is attached, it will emit the AF-assist beam
when necessary. The camera's built-in flash will not fire the AF-
assist beam.
3: IR AF assist beam only
When an external Speedlite is attached, only with infrared AF-
assist beam will be emitted. This prevents the AF-assist beam
from firing as a burst of small flashes.
With an EX-series Speedlite equipped with an LED light, the LED
light will not automatically turn on for AF-assist.
Ifthe external Speedlite's[AF-assist beam firing] Custom Functionis set
to [Disable], this function's settingwill be overridden andthe AF-assist
beam wilt notbe emitted.
0: Disable
1: Enable
Prevents mechanical vibrations in the camera caused by the reflex
mirror action (mirror shock), which can disturb shooting with super
telephoto lenses or close-up (macro) shooting. See page 147 for
the mirror Iockup procedure.
302
Custom Function Settings *
0: AF/AE lock
1: AE Iock/AF
This is convenient when you want to focus and meter separately.
Press the <-X-> button to autofocus, and press the shutter button
halfway to apply AE lock.
2: AF/AF lock, no AE lock
In the AI Servo AF operation, you can press the <-X-> button to
pause the AF operation momentarily. This prevents the AF from
being thrown off by any obstacle passing between the camera and
subject. The exposure is set at the moment the picture is taken.
3: AE/AF, no AE lock
This is useful for subjects that keep moving and stopping
repeatedly. During AI Servo AF, you can press the <-X-> button to
start or stop the AI Servo AF operation. The exposure is set at the
moment the picture is taken. Thus, the optimum focusing and
exposure will always be achieved as you wait for the decisive
moment.
[_ During LiveView shooting or movie shooting
With setting 1or 3, press the <")('> buttonfor One-ShotAF.Also, using
thetouch shutter will take apicture without autofocusing.
With setting2, press the shutter buttonhalfway for One-Shot AF.
303
Custom Function Settings*
± o, =l •l_.l I
You can assign a frequently-used function to <B/SET>. When the
camera is ready to shoot, pressing the <_I/$ET> button will display
the respective function setting screen.
0: Quick Control screen
The Quick Control screen will appear.
1: Image quality
The Image quality setting screen will appear. Select the desired
image-recording quality, then press <I_I/$ET>.
2: Flash exposure compensation
The Flash exposure compensation setting screen will appear. Set
the flash exposure compensation, then press <I_I/$ET>.
3: LCD monitor On/Off
Assigns the same function as the <INFO.> button.
4: Menu display
The menu screen will appear.
5: ISO speed
The ISO speed setting screen will appear. Set the ISO speed with
the <'4 >< I_ > keys or <_>dial. You can also set the ISO speed
looking through the viewfinder.
0: Display on
When the power switch is turned on, the shooting settings will be
displayed (p.50).
1: Previous display status
If you pressed the <INFO.> button and turned off the camera while
the LCD monitor was off, the shooting settings will not be
displayed when you turn on the camera again. This helps to save
battery power. The menu screens and image playback will still be
displayed when used.
If you pressed the <INFO.> button to display the shooting settings
and then turn off the camera, the shooting settings will be
displayed when you turn on the camera again.
3O4
Registering My Menu "_
Under the My Menu tab, you can register up to six menu options and
Custom Functions whose settings you change frequently.
Select [My Menu settings].
Under the [_-] tab, select [My Menu
settings], then press <SET>,
Select [Register to My Menu].
Select [Register to My Menu], then
press <SET >.
Register the desired items.
Select the item, then press <SET>.
On the confirmationdialog, select [OK]
and press <SET> to register the item.
You can register up to six items.
To return to the screen in step 2,
press the <MENU> button.
Sort
You can change the order of the registered items in My Menu. Select
[Sort] and select the item whose order you want to change. Then
press <SET>. With [_] displayed, press the <&> <¥> keys to
change the order, then press <SET>.
Delete item/items and Delete all items
You can delete any of the registered items. [Delete item/items]
deletes one item at a time, and [Delete all items] deletes all
registered items.
Display from My Menu
When [Enable] is set, the [_] tab will be displayed first when you
display the menu screen.
305
Autres manuels pour REBEL SL1 EOS 100D
4
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels Canon Appareil photo numérique
Canon
Canon EOS-1D Mark II Digial Manuel de service
Canon
Canon EOS 1N Mode d’emploi
Canon
Canon Powershot SX20 IS Manuel utilisateur
Canon
Canon PowerShot SD790 IS Digital ELPH Manuel utilisateur
Canon
Canon PowerShot A540 Manuel utilisateur
Canon
Canon EOS 6D Manuel utilisateur
Canon
Canon CANON EOS 1100D Manuel utilisateur
Canon
Canon AE-1 Manuel utilisateur
Canon
Canon PowerShot G3 Manuel utilisateur
Canon
Canon PowerShot SX1 IS Manuel utilisateur
Canon
Canon PowerShot SD750 User Guide Advanced Manuel utilisateur
Canon
Canon EOS 750D Manuel utilisateur
Canon
Canon PowerShot S110 Digital ELPH Manuel utilisateur
Canon
Canon IXUS 120 IS Manuel utilisateur
Canon
Canon REBEL SL1 EOS 100D Manuel utilisateur
Canon
Canon DentalFoto Manuel utilisateur
Canon
Canon Powershot S60 Manuel utilisateur
Canon
Canon EOS 5D Mark III Manuel
Canon
Canon WP-DC27 Manuel utilisateur
Canon
Canon EOS 100D Guide d'installation
