BlazeVideo A280 Manuel utilisateur
Trail Camera
Model#: A280
INSTRUCTION MANUAL
V1.1
TABLE OF CONTENT
1. IN THE BOX............................................................... 1
2. IMPORTANT NOTE...................................................1
3. INTRODUCTION........................................................1
3.1. ABOUT THE CAMERA................................... 1
3.2. MAIN FEATURES........................................... 2
3.3. APPLICATIONS...............................................3
4. PARTS AND CONTROLS......................................... 3
5. INSTALLING THE BATTERIES AND SD CARD.. 7
5.1. LOADING BATTERIES................................... 7
5.2. INSERTING THE SD CARD............................8
6. USING THE CAMERA...............................................9
7. THE OFF, ON, AND SURVEILLANCE MODES...10
7.1. OFF MODE................................................... 10
7.2. ON MODE......................................................10
7.3. SURVEILLANCE MODE...............................11
8. ADVANCED SETTINGS......................................... 11
9. MOUNTING AND POSITIONING..........................16
9.1. MOUNTING...................................................16
9.2. SENSING ANGLE AND DISTANCE TEST... 17
9.3. STARTING..................................................... 18
10. REVIEW PHOTOS OR VIDEOS........................... 19
11. TECHNICAL SPECIFICATIONS.......................... 20
12. TROUBLESHOOTING...........................................21
13. WARRANTY...........................................................23
14. FCC COMPLIANCE STATEMENT...................... 24
1
1. IN THE BOX
1 x Camera, 1 x Mount Strap,
1 x Instruction Manual, 1 x Mini USB Cord
Note: Memory card and batteries are not included (user supplied).
2. IMPORTANT NOTE
Require eight (8) 1.5V AA Alkaline or Lithium batteries.
We recommend the use of Energizer AA Lithium batteries
in this camera to obtain maximum battery life.
Do not mix old and new batteries.
Do not mix battery type.
Rechargeable AA batteries are NOT recommended as the
lower voltage they produce can cause operational issues.
Remove batteries when the camera is NOT in use.
Require a regular SD memory card (max capacity 256GB,
Class 10). We recommend using SanDisk 32GB
SDHC/Class10 memory cards in the camera to obtain the
best cost-performance.
Before use, please gently remove the protective films on the
front of the camera to get the best performance, format your
SD card in the camera.
3. INTRODUCTION
3.1. ABOUT THE CAMERA
The A280 trail camera is a new generation of digital
scouting camera, it can be triggered by any movement of
2
game in a location, detected by a highly sensitive Passive
Infra-Red (PIR) motion sensor, and then take high quality
pictures (up to 24MP still photos), or 1296P H.264 video
clips with audio.
The camera features the all-new innovative and ultra-clear
imaging technology, encompasses all-new software
innovations, smart illumination technology, blur reduction
technology, auto noise reduction and dynamic exposure
technology to deliver high resolution image quality.
3.2. MAIN FEATURES
High quality pictures (max 24MP still photos), 1296P
20fps or 1080P 30fps H.264 video clips with audio
Clear night vision, flash range 100ft. The camera is
equipped with 36pcs high-power infrared no glow
940nm LEDs that function as a flash, invisible to eyes
Wide view angle - 70°
Easy to use with well-designed operation buttons and
built-in 2.4-inch color screen, easy to program, review
pictures and videos on the screen
Two working modes - Motion detection and Time lapse
Fast trigger time approx. 0.1~0.6 seconds (pre-activated
technology with 3 PIR sensors designed), Fast recovery
time of less than 0.5 second, Long trigger distance up to
90ft.
Info strip on each capture: Date, Time, Temperature &
Moon phase
Operation hours, Loop recording, Password protected
Built for any climate - IP66 Waterproof designed for
outdoor use and resistant against rain and snow.
3
Operation Temperature: -4~140°F
Support SD/SDHC/SDXC memory card, max capacity
256GB (user supplied)
Extremely long in-field battery life up to 8 months in a
stand-by state with 8 AA 1.5V batteries (user supplied)
3.3. APPLICATIONS
The camera can be used as follows:
For hunting and trailing animals’ trace or habit
For wildlife observing and researching, captures pictures
and videos of wild animals
As sports camera, for riding, driving, camping or
exploring
As motion-triggered security camera, for home, farm,
office and community
All other indoor & outdoor surveillance where invasion
evidence needed
4. PARTS AND CONTROLS
The camera is equipped with 36pcs high efficiency infrared
LEDs, LED Indicators, Lens, PIR Sensors, Lock Holes in
front view (Figure 1).
4
Figure 1: Front View
IR LEDs
Lock
Hole
Optical
Lens
PIR
Lens
Light
Sensor
Indicator
Lock
Buckle
5
The camera provides the following connections for external
devices: Mini USB port and SD card slot etc. (Figure 2).
Figure 2: Bottom View
The camera has one security cable hole and two strap holes
on the back. The strap can be put through the strap holes
and fastened securely around the tree trunk by pulling the
end of the strap firmly (Figure 3).
Figure 3: Right / Back View
The camera has a 2.4-inch built-in LCD screen, which can
be used for reviewing pictures or videos and menu
displaying, and exclusive keypad design for easy program
Tripod Base
1/4" - 20
SD Card
Holder
DC 12V/1A
Plug 5.5x2.1mm
Strap
Hole
Lock
Buckle
Mini USB Port
Microphone
Security
Cable Hole
6
and operation, 8 AA batteries slot supported (Figure 4).
Figure 4: Inside View
Figure 5: Operation Buttons
A power switch is used to power on (ON mode) or off the
camera (OFF mode). A START button is used to quickly
make the camera into the surveillance mode (motion
detection or time lapse per your settings (Figure 5). When
the camera is in the surveillance mode, press the START
button to wake up the camera.
Power
Switch
Color
Screen
Battery
Compartment
and Cover
Operation
Buttons
Surveillance
Mode
7
5. INSTALLING THE BATTERIES AND SD CARD
Before you begin learning how to use your camera, you will
first need to install a set of batteries and insert an SD card.
Although that may only take you a minute, there are some
important notes about both batteries and SD cards you
should be aware of, so please take the time to read the
following directions and cautions:
5.1. LOADING BATTERIES
After opening the cover of the battery compartment, you
will see that the camera has eight battery slots (Figure 6). A
full eight batteries must be installed for the camera to
operate. Be sure to insert each battery with correct polarity
(negative or "flat" end against the long spring of each
battery slot).
In ON mode when battery power level gets low, the
message "Low Battery" will show on the screen, please
replace the batteries. If the message “Night vision is
unavailable at low voltage” shows on the screen, the
batteries still work at daytime till “Low Batteries”, but this
does mean the batteries are not able to drive IR LEDs flash
at night, if you want to continue night vision, please replace
the batteries.
8
Figure 6: Loading the Batteries
5.2. INSERTING THE SD CARD
Insert the SD card (with the camera powered off), before
beginning to operate the camera. Don't insert or remove the
SD card when the camera is powered on or in the
surveillance mode. (Figure 7).
Figure 7: Inserting the SD Card
The following describes how to insert and remove the SD
card:
Insert the SD card into the card slot with its label side
upwards.A "click" sound indicates that the card is
installed successfully. If the wrong side of the card is
facing up, you will not be able to insert it without force,
there is only one correct way to insert cards. If the SD
+
一
Table des matières
Autres manuels BlazeVideo Appareil photo numérique
