Camsat TCO-7h Plus Manuel utilisateur

5,8

GHz

PAL

NTSC

9 V DC

14 V DC

-20ºC

+55ºC

BNC

VIDEO

MTHS

WARRANTY

BNC

VIDEO

UTP

VIDEO

CHANNELS

IP65

User’s Manual

Warranty conditions

Declaration of conformity

TCO-7h Plus

Wireless, 7-channel 5.8 GHz, external (IP65) Video/

Audio Transmitting-Receiving Kit for security cameras

systems

Registry number GIO E0012219W

Contents

Product description .............................................. 4

Contents of kit ..................................................... 4

Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Technical specication........................................... 6

Preparing set to work............................................. 6

RSSI connector - videosignal strengthmeasurement...... 6

Operating channels setting ..................................... 7

Assembly ........................................................... 7

Warranty general conditions ................................... 9

Disposal of devices................................................ 10

Product Features

Designed for wireless PAL or NTSC video signal transmission

over the radio-link on ISM 5.8 GHz band for surveillance

camera systems. Supports up to 7 channels within 5725 to

5875 MHz frequency band. Each of 7 channels has factory

dened operating frequency. It has one Video BNC input and

two audio input/output. Embedded anti-interference and

surge protection.

Contents of kit

Contents of TCO 5807h package:

ANTENNAS SIDE

1 2

1. Video/Audio transmitter with integrated antenna.

2. Video/Audio receiver with ipanel directional antenna.

3. Mounting bracket x 2 pcs.

4. User`s Manual.

5. Declaration of Conformity.

Recommendations

1. Larger monitoring systems consisting of several sets

should be set in sequence, i.e. the power connection of

next set should take place only after precise alignment of

the previous set.

2. Due to the generation of interference it is not recommended

to use switching power supplies other than those dedicated

by the manufacturer for example. ZS12 / 1A.

3. Recommended stabilized power supply, transformer 12V at

least 350mA.

4. It is recommended to install the receivers TCO-7h plus an

interval of at least 7 m from digital receivers (CDS-5021,

CDS-5IP, WI-FI antenna and others).

To ensure stable radio range, clear line of sight between the

antennas is a must. There should be 100% of optical visibility

in rst Fresnel zone.

d -3,9 m

D - 300 m

At a frequency of 5.8 GHz and 300 meters the radio beam

clearance of at least 3.9 m. should be provided

Specication

Operating frequency 5725 MHz–5875 MHz

Power < 25mW; 14 dBm

Receiver sensitivity - 85 dBM

Impedancja 50 Ω

Modulation FM

Number of channels 7 (chosen permanently)

Video format PAL lub NTSC

Input BNC 1 Vp-p (75 Ω) + screw

connection UTP (100 Ω)

Audio Stereo 600 Ω, 2 Volt p-p

Audio band 50–15000 Hz

Power supply 9–14 V / 350 mA DC

Operating temperature from −20°C to 55°C

Dimensions Tx: 80 × 130 × 75 mm

RX: 164 × 164 × 80 mm

Application outdoor IP65

Preparations for operation

Before mounting the unit on the mast you should:

- Check whether the device has not been mechanically

damaged during transportation

- Check the settings of the channel: transmitter and receiver

should be set to the same channel. If the settings are not

the same you should set it in accordance with the guidelines

set out in the table a) on page 7.

Connector RSSI - strength of the video signal

The receiver has the ability to connect an external radio signal

level meter TCO-Meter.

More: www.camsat.com.pl

Channel Setting

Table a) Channel settings

Assembly

1. Screw the bracket (triangle) to the base of unit

2. Attach the unit using the bracket to a stable mast.

3. Set the transmitter antenna directly at the receiving point.

(Note: the transmitter antenna needs to „see” optically with

receiver antenna - view from the antennas on the last page

of this manual).

4. Install the receiver and manage precisely the antenna

directly on the point of broadcasting.

5. Connect video signal cables and power supply as described

on the electronics board.

6. Set the desired operating channel according to the table

above. Channel numbers and antennas polarization

should be the same for both interacting with each other

transceiver devices. The transmitter assembly with

potentiometer VR enables to set the video level.

WARNING! This adjustment is necessary because of the

dierent levels of video cameras of dierent brands. The

regulation is also necessary when using passive converters

BNC / UTP.

The video signal should be connected to the In / Out BNC or

UTP connectors.

Terminals description:

GND – minus of the power supply and audio signal

A-L - Audio / left

A-R - audio / right

+12 V - plus DC

10-14 V minimum 350 mA

UTP VIDEO AUDIO SUPPLY

- L RGND GND+ +12

www.camsat.com

TRANSMITTER

TCO-7h Plus Tx

WIRELESS VIDEO & AUDIO

POWER LED

CHANNEL

1 2 3 4 5 6 7

CHANNEL

UTP VIDEO AUDIO SUPPLY

- L RGND GND+ +12

www.camsat.com

RECEIVER

TCO-7h Plus Rx

WIRELESS VIDEO & AUDIO

RECORDER/

MONITOR

1 2 3

CAMERA

POWER SUPPLY POWER SUPPLY

CHANNELS

1 2 3

UTP VIDEO

- L+

General terms and conditions of a warranty

Camsat company gives a warranty of 24 months for

transmission sets of the following series TCO-7H Plus.

1. In case of detecting incorrect work of a device, before

giving the device to the service, it is necessary to make

sure that everything was done in accordance with the

instruction manual.

2. In case of giving or sending the faulty device to be

repaired, it is indispensable to enclose a detailed

description in the written form including faulty action of

the device with taking into consideration work environment

and the way in which they can be seen.

3. One can use the warranty if he shows the proof of purchase

(a receipt) with the claimed device including the purchase

date and a description of the damage.

4. The warranty repair includes only damages resulting from

causes included in the sold device.

5. The warranty repair will be made in the shortest time

possible not exceeding 14 days counting from the date

of accepting the device to be repaired in the service. In

case of a necessity to import parts, the repair date can be

exceeded. After making the repair, the warranty period is

exceeded by the time of repair.

6. The guarantor is not responsible for losing conguration

settings of the device resulting from the repair of the

device or its damage.

7. The guarantor can refuse making the warranty repair or

completely renounce from the warranty in case of stating

that seals on the devices or subsystems included in it

are broken.

8. All remarks concerning the service and resulting

from the warranty are made only in the service of the

Camsat company.

The warranty does not cove

- Mechanical damage and malfunctions caused by

random events such as res, electrical surges, electrical

discharges, power, chemicals.

- Damage caused by: incorrect use of the device, use of the

device for non-intended purpose or violating instruction

manual, customer negligence, improper operation

(temperature, humidity, ooding, dirt, sand inclusions,

improper power supply).

- Claims due to technical parameters if they are in

accordance with the specied by the manufacturer.

- The warranty does not cover the traces of use generated

during operation as scratches, dirt, wipe.

In matters not covered by the terms of this guarantee, the

relevant regulations of the Civil Code will be followed.

Disposal of devices

he adjacent symbol indicates that a particular

electrical and electronic equipment, after the end

of its service life must not be disposed of with

household waste. The device must be submitted to

designated collection points. For details of your

nearest collection point, please contact your local

authorities.

Proper disposal of this product allows you to save valuable

resources and prevent negative eects on health and the

environment which could be at risk in case of improper

handling of waste. Improper disposal of this waste provides

penalties in the relevant regulations.

Table des matières

Autres manuels Camsat Émetteur

Camsat

Camsat CAM8h-AHD Manuel utilisateur

Camsat

Camsat GlobalCAM-LTE Manuel utilisateur

Camsat

Camsat CDS-6IP SMA Manuel utilisateur

Camsat

Camsat CAM-Analog2.0 Manuel utilisateur

Camsat

Camsat CAM-9 Manuel utilisateur

Camsat

Camsat CDS-6IP 3PoE Manuel utilisateur

Camsat

Camsat CDS-6IP MULTI POE Manuel utilisateur

Camsat

Camsat CDS-LIFT IP Manuel utilisateur

Camsat

Camsat VueNet EasyLink Manuel utilisateur

Camsat

Camsat CDS-5IPmini Manuel de l'opérateur

Camsat

Camsat TCO 5807m Manuel utilisateur

Camsat

Camsat CAM8h-Multi2/AHD Manuel utilisateur

Camsat

Camsat CDS-6IPeco Manuel de l'opérateur

Manuels Émetteur populaires d'autres marques

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manuel du propriétaire

Honeywell

Honeywell 5816WMBR Manuel utilisateur

Kamstrup

Kamstrup READy MTU Mode d'emploi

Omega

Omega ZW Series Manuel utilisateur

ABB

ABB Field 264H Mode d’emploi

Alinco

Alinco DJ-V17T Manuel utilisateur

Dejero

Dejero EnGo 3x Manuel utilisateur

Rosemount

Rosemount 4600 Manuel utilisateur

Speaka Professional

Speaka Professional 2342740 Manuel utilisateur

trubomat

trubomat GAB 1000 Manuel utilisateur

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manuel utilisateur

Rondish

Rondish UT-11 Manuel utilisateur

MG 10JRE Manuel utilisateur

Burkert

Burkert 8177 Manuel utilisateur

Firetide

Firetide HotPort 3203 Manuel

Tele Radio

Tele Radio T9-02 Manuel utilisateur

Rotronic

Rotronic HygroFlex HF3 Series Manuel utilisateur

Jamara

Jamara FCX6 Pro Tel Manuel utilisateur