Cabletron Systems Cabletron SmartSwitch Router 250 Manuel utilisateur

SmartSwitch™ Router 250

ADSL-DMT

Quick Start Guide

P/N 222-00526-01

CONTENTS

INTRODUCTION .......................................................................................3

HARDWARE INSTALLATION .................................................................7

ACCESSING QUICK START ....................................................................9

ROUTER CONFIGURATION..................................................................14

APPENDIX A. INSTALLING AN ETHERNET ADAPTER AND

A TCP/IP PROTOCOL..............................................................................20

APPENDIX B. HARDWARE REFERENCE ...........................................23

APPENDIX C. FEDERAL

COMMUNICATIONS COMMISSION (FCC).........................................30

CONTACTING CABLETRON TECHNICAL SUPPORT.......................32

♦The SmartSwitch™ Router 250

The SmartSwitch™ Router 250 provides Internet and Corporate

access for telecommuters, home and remote office workers, and

Internet users at high-speed asymmetrical data rates of up to 640 Kbps

upstream and 8.0 Mbps downstream.

The router takes full advantage of Asymmetric Digital Subscriber

Line (ADSL) technology and uses Asynchronous Transfer Mode

(ATM) to provide remote Ethernet LAN connectivity via a single

ADSL line. Because ATM technology supports multiple virtual circuit

connections, users connected to an Ethernet LAN can access several

network services simultaneously.

♦Cabletron Quick Start

The router features an easy-to-use Windows-based management

application. It also has several built-in features that let users connect

to a Network Service Provider (NSP) in minutes.

INTRODUCTION

♦This Guide

This guide describes the configuration process involved in setting up

an ATM-based virtual circuit connection to a network service

provider. It shows you how to:

•Connect the router’s cables

•Configure your Windows 95 PC (or Windows 98 or

Windows NT 4.0)

•Install the Cabletron DSL Tools

•Configure the router for your Internet Account

•Connect to your Network Service Provider or Internet Service

Provider

♦Before You Begin...

System requirements for Cabletron Quick Start

•Windows 95, 98, NT 4.0, or Windows for Workgroups 3.11

•Ethernet network interface card (NIC)

•Microsoft TCP/IP stack installed and running on your PC

•CD-ROM drive

•Web Browser

Information to collect from your Network Service

Provider

Which link protocol should you use?

•PPP

•RFC 1483 (SNAP Encapsulation)

•RFC 1483MER (MAC Encapsulated Routing)

Which network options should you use?

•Bridging

•IP Routing

•Both Bridging and IP Routing

♦Contents of the Box

You should find the following items:

•SmartSwitch™ Router CD and Quick Start guide

(this guide)

•SmartSwitch™ Router 250

•Cables:

One power cable

One Ethernet 10Base-T (crossover) cable

One ADSL/ISDN cable

♦Instructions to Install the SmartSwitch™ Router 250

Hardware:

1. Ensure that the Power Switch on the router is OFF. Connect the

router to the AC power source using the power cable.

2. Connect the router to the computer workstation’s Ethernet card

using the crossover cable labeled "Ethernet 10Base-T,

Crossover" (RJ-45 connector). If you are connecting to a hub,

use a standard 10Base-T straight-through cable (not provided).

3. Connect the router to the ADSL line using the cable labeled

"ADSL or ISDN" (connect the RJ-45 connector to the router’s

ADSL R-DMT port and the other end of the cable to the

Telephone Jack).

4. Switch the router Power Switch ON.

HARDWARE INSTALLATION

♦SmartSwitch™ Router 250 Installation Diagram

The following diagram shows the back panel of the SmartSwitch™

Router 250 and the location of jacks.

To access Quick Start, you will first configure your PC to obtain an IP

address automatically and then install the Quick Start program. The

following step-by-step instructions will get you started quickly.

♦Configure your Windows 95 PC for TCP/IP

Note:The following configuration instructions also apply to

Windows 98 and NT 4.0.

This section assumes that you have already:

✔connected the cables.

✔powered the router on.

ACCESSING QUICK START

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Cabletron Systems Routeur réseau

Cabletron Systems

Cabletron Systems SmartSwitch Router Manuel utilisateur

Cabletron Systems

Cabletron Systems SmartSwitch 9000 Manuel utilisateur

Cabletron Systems

Cabletron Systems CSX200 CyberSWITCH Manuel utilisateur

Cabletron Systems

Cabletron Systems DELST-UI Manuel de programmation

Cabletron Systems

Cabletron Systems ELS100 Manuel utilisateur

Cabletron Systems

Cabletron Systems SSR 2000 Manuel utilisateur

Cabletron Systems

Cabletron Systems CSX100 series Manuel utilisateur

Cabletron Systems

Cabletron Systems BRIM-E6 Manuel utilisateur

Cabletron Systems

Cabletron Systems BRIM-WT1 Manuel utilisateur

Cabletron Systems

Cabletron Systems MMAC-Plus 9T106-01 Manuel utilisateur

Cabletron Systems

Cabletron Systems 2H253-25R Manuel d'utilisation

Cabletron Systems

Cabletron Systems SmartSwitch 8-slot Instructions de montage

Cabletron Systems

Cabletron Systems FDMMIM Manuel utilisateur

Cabletron Systems

Cabletron Systems 3H02-04 Manuel utilisateur

Cabletron Systems

Cabletron Systems SmartSwitch 2200 Manuel d'utilisation

Cabletron Systems

Cabletron Systems MMAC-Plus 9F106-01 Manuel utilisateur

Cabletron Systems

Cabletron Systems CyberSWITCH CSX400 Manuel utilisateur

Cabletron Systems

Cabletron Systems MMAC-Plus 9W111-08 Manuel utilisateur

Cabletron Systems

Cabletron Systems Spectrum EMM-E6 Manuel utilisateur

Cabletron Systems

Cabletron Systems MMAC-Plus 9T101-04 Manuel utilisateur

Cabletron Systems

Cabletron Systems 2000 Manuel utilisateur

Cabletron Systems

Cabletron Systems SmartSTACK ELS100-24TXM Manuel utilisateur

Cabletron Systems

Cabletron Systems SmartSwitch Router Instructions de montage

Cabletron Systems

Cabletron Systems ELS100 Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité