Cabletron Systems ESX-1380 Instructions d'installation et d'utilisation

PN 9031984-01 Page 1

ESX-1320R/ESX-1380R

ADDENDUM

This addendum in conjunction with the

ESX-1320/ESX-1380 Installation Guide

and the

ESX-1320/ESX-1380 Local Management Guide

provides the

documentation necessary to install and manage the ESX-1320R or the

ESX-1380R Ethernet Workgroup Switch. This addendum documents the

hardware differences between the ESX-1320/ESX-1380 and the

ESX-1320R/ESX-1380R. Refer to the

ESX-1320/ESX-1380 Installation Guide

for information concerning installation and troubleshooting. Refer to the

ESX-1320/ESX-1380 Local Management Guide

for information on accessing and

using Local Management.

Overview

The ESX-1320R and the ESX-1380R are functionally the same as the ESX-1320

and the ESX-1380, respectively, except the ESX-1320R and the ESX-1380R are

equipped with redundant, load sharing power supplies. If one power supply fails,

the other power supply continues to provide the power necessary to operate the

unit. Two LEDs on the back of the unit (see Figure 1) indicate the operating

status of the two power supplies. To accommodate the addition of the second

internal power supply, the depths of the ESX-1320R and the ESX-1380R are

greater than those or the ESX-1320 and the ESX-1380.

Figure 1 ESX-1320R or ESX-1380R (RearView)

THIS UNIT HAS TWO POWER SUPPLY CORDS.DISCONNECT BOTH

POWER SUPPLY CORDS BEFORE SERVICING TO AVOID ELECTRIC

SHOCK.

DIESES GERÄT HAT MEHR ALS EINEN NETZANSCHLUß.TRENNEN SIE

VOR WARTUNGSARBEITEN DIE 2 NETZANSCHLÜSSE VOM NETZ, UM

ELEKTRISCHE SCHLAGE ZU VERMEIDEN.

CET APPAREIL COMPORTE PLUS D’UN CORDON D’ALIMENTATION.

RAFIN DE PREVENIR LES CHOCS ELECTRIQUES, DEBRANCHER LES 2

CORDONS D’ALIMENTATION AVANT DE FAIRE LE DEPANNAGE.

PWR 1

PWR 2

POWER 2

ESX-1380R

Power 2

Power 1 LANVIEW Power

Supply LEDs

POWER 1

Power Supply Operation

Page 2 PN 9031984-01

Power Supply Operation

The ESX-1320R and the ESX-1380R are equipped with two load sharing power

supplies to provide redundancy. Two power cord outlets, labeled Power 1 and

Power 2 (see Figure 1), are used to provide power to each power supply. To take

advantage of the load sharing and redundancy capabilities, each power cord must

be plugged into a dedicated ac outlet.

LANVIEW Diagnostic LEDs

In addition to the LANVIEW LEDs located on the front panel of the ESX-1320

and the ESX-1380, the ESX-1320R and the ESX-1380R are equipped with two

LANVIEW diagnostic LEDs located on the rear of the unit (see Figure 1). These

LEDs provide an easy way to observe the status of the individual power supplies.

Table 1 provides a description of the LANVIEW power supply LEDs.

Physical Properties (ESX-1320R or ESX-1380R)

Dimensions: 6.86H x 43.18W x 46.99D (cm)

2.7H x 17W x 18.5D (in)

Weight (Unit): 5.45 kg (12 lb)

Electrical Speciﬁcations (ESX-1320R or ESX-1380R)

Input: 100-125 V ~ /4.0 A

200-250 V ~ / 2.0 A

Phasing: Single-phase

Frequency: 50/60 Hz

Table 1 LANVIEW Power Supply LEDs

LED Color Description

PWR 1 Green Power Supply 1 is operating correctly.

Red Power Supply 1 is not operational.

PWR 2 Green Power Supply 2 is operating correctly.

Red Power Supply 2 is not operational.

Autres manuels pour ESX-1380

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Cabletron Systems Routeur réseau

Cabletron Systems

Cabletron Systems SmartSwitch Router Instructions de montage

Cabletron Systems

Cabletron Systems Network Router Manuel utilisateur

Cabletron Systems

Cabletron Systems SSR 2000 Manuel utilisateur

Cabletron Systems

Cabletron Systems MMAC-Plus 9W111-08 Manuel utilisateur

Cabletron Systems

Cabletron Systems MMAC-Plus 9F106-01 Manuel utilisateur

Cabletron Systems

Cabletron Systems SSR-600 Manuel utilisateur

Cabletron Systems

Cabletron Systems Cabletron SmartSwitch Router 250 Manuel utilisateur

Cabletron Systems

Cabletron Systems CyberSWITCH CSX400 Manuel utilisateur

Cabletron Systems

Cabletron Systems MMAC-Plus 9T106-01 Manuel utilisateur

Cabletron Systems

Cabletron Systems CSX200 CyberSWITCH Manuel utilisateur

Cabletron Systems

Cabletron Systems SmartSwitch 9000 Manuel utilisateur

Cabletron Systems

Cabletron Systems Spectrum EMM-E6 Manuel utilisateur

Cabletron Systems

Cabletron Systems CSX200 CyberSWITCH Manuel utilisateur

Cabletron Systems

Cabletron Systems SmartSTACK ELS100-24TXM Manuel utilisateur

Cabletron Systems

Cabletron Systems CyberSWITCH CSX400 Manuel utilisateur

Cabletron Systems

Cabletron Systems SSR 2000 Manuel utilisateur

Cabletron Systems

Cabletron Systems CyberSWITCH CSX500 Manuel utilisateur

Cabletron Systems

Cabletron Systems BRIM E100 BRIM-E100 Manuel utilisateur

Cabletron Systems

Cabletron Systems MMAC-Plus 9T101-04 Manuel utilisateur

Cabletron Systems

Cabletron Systems BRIM-WT1 Manuel utilisateur

Cabletron Systems

Cabletron Systems BRIM-E6 Manuel utilisateur

Cabletron Systems

Cabletron Systems NB20E Manuel utilisateur

Cabletron Systems

Cabletron Systems SmartSTACK ELS100-24TXG Manuel utilisateur

Cabletron Systems

Cabletron Systems CyberSWITCH CSX101 Manuel du propriétaire

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité