BWI Eagle AIR-EAGLE SR PLUS Manuel

PRODUCT INFORMATION

BULLETIN

105 Bonnie Drive

Butler, PA 16002

724-283-4681

724-283-5939 (fax)

www.bwieagle.com

AIR-EAGLE® SR PLUS

2.4 G

Transmitter

MODEL

DESCRIPTION

The AIR-EAGLE SR PLUS TX Is an R.F. transmitter capable of sending

a single 5-24VDC input command to an Air-Eagle SR Receiver located

up to 600 feet away. Any number of transmitters and receivers can be

combined to create a medium range radio frequency system that

operates hazardous or hard-to-reach electrical apparatus from safe,

convenient locations. Eight user-selectable frequencies allow multiple

systems to operate simultaneously in the same area without

interference.

APPROVALS

United States (FCC) OUR-XBEEPRO

Canada (IC) 4214A-XBEEPRO

Europe (CE) ETSI

INSTALLATION

DISCONNECT DC Power from all equipment before installation.

1. Mount the AIR-EAGLE SR TRANSMITTER in a convenient location.

2. Install wiring to input terminal strip

3. Install antenna. The unit has an antenna connector located on the

right side on the enclosure. Attach the supplied portable antenna to

this connector.

4. Connect DC power to the proper terminals in your control circuit.

TERMINAL STRIP WIRING

TER 3

VOLTAGE INPUT

TER 2

RELAY OUTPUT

TER 1

AC/DC POWER INPUT

1 DC common 1 Not Used 1 (-) 9-36VDC

2 +5-24VDC 2 Not Used 2 (+) 9-36VDC

3 Not Used 3 Not Used

GENERAL OPERATION

When 5-24VDC appears on the input the unit transmits to energize relay 1

(or another relay as selected by the channel code transmitted) in any

receiver within transmit range. The signal transmits continuously as long

5-24VDC is present and ceases when 5-24VDC is removed.

Dimensions (with mounting plate) 7.07L x 3.57W x 1.62H

CONTROLS AND INDICATORS

Power – LED1 Illuminates green when unit is powered

TX – LED2 Illuminates red when unit is transmitting

Relay – LED3 Not used on this model

RF1 RF module that sends data to the remote

receiver

SEL1 Seven dip switches for selecting options and

network

freq

uency

TER

Voltage

nput

TER2 Relay output

TER1

Power Input

AIR-EAGLE® SR PLUS

2.4 G

RF Transmitt

MODEL

CHANNEL CODE & FREQUENCY SET-UP

The unit is shipped from the factory with all SEL1 switches in the open

positions. By default it is transmitting Channel #1 code and operating on

Frequency #1. If you wish to transmit a different channel code or and/or

change the frequency, follow the instructions on the table below.

1) Remove power from unit

2) Remove top cover.

3) Select desired channel code and/or frequency using table below.

4) Reattach cover and apply power.

5) Programming is now complete.

CHANNEL SELECT

ION

SET

SEL1 (SW1-4)

Channel

Code To Be

Transmitted

SW1 SW2 SW3 SW4

(default)

OPEN

CLOSED

OPEN

PEN

CLOS

OPEN

OPE

CLOSED

OPEN

PEN

OPEN

CLOSED

OPEN

CLOSED

OPEN

CLOSED

OPEN

CLOSED

OPEN

CLOSED

OPEN

CLOSED

OPEN

CLOSED

OPEN

CLOSED

OPEN

CLOSED

PEN

CLOSED

OPEN

CLOSED

OPEN

CLOSED

PEN

CLOSED

FREQUENCY SET

SEL1

(SW5-7)

Network

Frequency

SW5 SW6 SW7

(default)

OPEN

CLOSED

OPEN

OPE

CLOSED

OPEN

CLOSED

OPEN

CLO

SED

OPEN

CLOSED

SPECIFICATIONS

C Input

–

VDC

, 5 W

Transmitter

Frequency

2.4 GHz Spread Spectrum

RF Output Power

60 mW

Transmit Range Approximately 600 Feet

Transmitter

Frequ

encies

8 Independent Net

work Fre

uenc

ies

Antenna Connection TNC Female Connector

Operating Temperature

F to +185

Enclosure

Polycarbonate NEMA 4, 12, 13 – IP66

Weight

Approx 2 lbs.

DIMENSIONS

REPLACEMENT PARTS & ACCESSORIES

PC Board (Ma

in)

Standard

Antenn

a (Incl

uded):

2.4GHz TNC Portable Antenna (For

ista

nces up to 6

00 feet*)

1201

Optional Antennas and Accessories –

Used to increase range in both non line of sight and line of sight

applications.

Contact BWI Eagle fo

r recommendations

2.4GHz Thru

ole Mou

nt Mobil

Ant

enna

2201

2.4GHz Magne

tic

Mou

nt Mobile Antenna

2202

2.4GHz Omni Directional Antenna

3201

2.4GHz 13dB Yagi Antenna

3202

Flex Coax Cable w/Connectors – Connects

external antenna(s) to base

unit(s).

49-4000-XX

X = # o

f Feet)

2 Ft. Bulkhead Assembly (Used when

unting receive inside another enclosure)

5004

ISO

* = Line of Sight

LIMITED WARRANTY STATEMENT

BWI Eagle Inc. warrants the Air-Eagle Remote Control System, if properly used and

installed, will be free from defects in material and workmanship for a period of 1 year

after date of purchase. Said warranty to include the repair or replacement of defective

equipment. This warranty does not cover damage due to external causes, including

accident, problems with electrical power, usage not in accordance with product

instructions, misuse, neglect, alteration, repair, improper installation, or improper

testing. This limited warranty, and any implied warranties that may exist under state

law, apply only to the original purchaser of the equipment, and last only for as long as

such purchaser continues to own the equipment. This warranty replaces all other

warranties, express or implied including, but not limited to, the implied warranties or

merchantability and fitness for a particular purpose. BWI Eagle makes no express

warranties beyond those stated here. BWI disclaims without limitation, implied

warranties of merchantability and fitness for a particular purpose. Some jurisdictions

do not allow the exclusion of implied warranties so this limitation may not apply to

you. To obtain warranty service, contact BWI Eagle for a return material

authorization. When returning equipment to BWI Eagle, the customer assumes the

risk of damage or loss during shipping and is responsible for the shipping costs

incurred.

DOCUMENT DATE: 07/30/19 / PRODUCT REV. 5

Autres manuels pour AIR-EAGLE SR PLUS

Ce manuel convient aux modèles suivants

Autres manuels BWI Eagle Émetteur

BWI Eagle

BWI Eagle AIR-EAGLE XLT Manuel utilisateur

BWI Eagle

BWI Eagle AIR-EAGLE XLT 441-HH-9 Manuel utilisateur

BWI Eagle

BWI Eagle AIR-EAGLE XLT 441AN/D-1000-120VAC Manuel

BWI Eagle

BWI Eagle AIR-EAGLE XLT Manuel

BWI Eagle

BWI Eagle AIR-EAGLE XLT Manuel

BWI Eagle

BWI Eagle 441-10100-AC Manuel utilisateur

BWI Eagle

BWI Eagle AIR-EAGLE XLT Manuel

BWI Eagle

BWI Eagle AIR-EAGLE XLT 441UP-HHED-4-001 Manuel

BWI Eagle

BWI Eagle AIR-EAGLE XLT PLUS 465UEBD-HH Manuel

BWI Eagle

BWI Eagle AIR-EAGLE FM2 43-1000-SSB-R1/8-DC Manuel

BWI Eagle

BWI Eagle AIR-EAGLE FM2 43-1000-RB-N4-120VAC Manuel

BWI Eagle

BWI Eagle AIR-EAGLE SR PLUS 36-HH-9-VBR Manuel

BWI Eagle

BWI Eagle AIR-EAGLE SR Manuel

BWI Eagle

BWI Eagle AIR-EAGLE SR PLUS 36AN-1000-120VAC Manuel

BWI Eagle

BWI Eagle AIR-EAGLE XLT 441-HH-1 Manuel utilisateur

BWI Eagle

BWI Eagle AIR-EAGLE XLT 441-HH-4-VBR Manuel

BWI Eagle

BWI Eagle AIR-EAGLE FM2 43-1000-SSB-120VAC Manuel

BWI Eagle

BWI Eagle AIR-EAGLE XLT 441-HH-9-VBR Manuel

BWI Eagle

BWI Eagle AIR-EAGLE XLT PLUS 461-HH-1 Manuel

BWI Eagle

BWI Eagle AIR-EAGLE XLT PLUS 461-1800-DC Manuel utilisateur

BWI Eagle

BWI Eagle AIR-EAGLE XLT PLUS Manuel utilisateur

BWI Eagle

BWI Eagle AIR-EAGLE XLT 441P-HH-4-002-CL Manuel

BWI Eagle

BWI Eagle AIR-EAGLE FM2 43-1100R2-DC Manuel

BWI Eagle

BWI Eagle AIR-EAGLE XLT PLUS 465U-HHEBD-4 Manuel utilisateur

Manuels Émetteur populaires d'autres marques

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manuel du propriétaire

Honeywell

Honeywell 5816WMBR Manuel utilisateur

Kamstrup

Kamstrup READy MTU Mode d'emploi

Omega

Omega ZW Series Manuel utilisateur

ABB

ABB Field 264H Mode d’emploi

Alinco

Alinco DJ-V17T Manuel utilisateur

Dejero

Dejero EnGo 3x Manuel utilisateur

Rosemount

Rosemount 4600 Manuel utilisateur

Speaka Professional

Speaka Professional 2342740 Manuel utilisateur

trubomat

trubomat GAB 1000 Manuel utilisateur

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manuel utilisateur

Rondish

Rondish UT-11 Manuel utilisateur

MG 10JRE Manuel utilisateur

Burkert

Burkert 8177 Manuel utilisateur

Firetide

Firetide HotPort 3203 Manuel

Tele Radio

Tele Radio T9-02 Manuel utilisateur

Rotronic

Rotronic HygroFlex HF3 Series Manuel utilisateur

Jamara

Jamara FCX6 Pro Tel Manuel utilisateur